※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、ISO/TC 6 技術委員会「紙、板紙およびパルプ」 、SC 2 分科会「紙および板紙の試験方法および品質仕様」によって作成されました。
ISO 8791 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、ISO 8791 のこの部分で定義されているように、王研法に準拠した装置を使用して紙および板紙の平滑性を測定するための王研法を規定しています。これはすべての印刷用紙および板紙に適用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
OKの滑らかさ
規定の条件下で、王研試験機の平坦測定ランドと試験片表面との隙間から一定量の空気が漏れるのに要する時間
注記 1:王研の滑らかさは 100 ml あたりの秒数 (s/100 ml) で表されます。
参考文献
| 1 | ISO 5627, 紙および板紙 — 平滑度の測定 (Bekk 法) |
| 2 | ISO 5725-1:1994, 測定方法と結果の精度 (真性と精度) — Part 1: 一般原則と定義 |
| 3 | ISO/TR 24498:2006, 紙、板紙およびパルプ — 試験方法の不確かさの推定 |
| 4 | Tappi 試験法 T 1200 sp-07, TAPPI の再現性と再現性を決定するための試験法の共同評価 |
| 5 | 加納徹、オーケン空気抵抗・平滑性試験機と関連試験機の測定値の比較、日本TAPPIジャーナル、62, (12)、84(2008) |
| 6 | 山本和久、開田和久、岩崎正明、ベックの紙の平滑性について、日本 TAPPI ジャーナル、20, (2)、17 (1966) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 6, Paper, board and pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board.
A list of all the parts in the ISO 8791 series can be found on the ISO website.
1 Scope
This document specifies the Oken method for determining the smoothness of paper and board using an apparatus which complies with the Oken method, as defined in this part of ISO 8791. It is applicable to all printing papers and boards.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRDH and 100 IRDH)
- ISO 186, Paper and board — Sampling to determine average quality
- ISO 187, Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
- ISO 4662, Rubber, vulcanized or thermoplastic — Determination of rebound resilience
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
oken smoothness
time required for a specific volume of air to leak from the gap between the flat measuring lands of the Oken tester and the surface of a test piece under specified conditions
Note 1 to entry: Oken smoothness is expressed in seconds per 100 ml (s/100 ml).
Bibliography
| 1 | ISO 5627, Paper and board — Determination of smoothness (Bekk method) |
| 2 | ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| 3 | ISO/TR 24498:2006, Paper, board and pulps — Estimation of uncertainty for test methods |
| 4 | Tappi Test method T 1200 sp-07, Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility |
| 5 | Kano T., A Comparison between Oken Air Resistance-Smoothness Tester and Related Testers in Relation to Measured Values, Japan TAPPI Journal, 62(12), 84 (2008). |
| 6 | Yamamoto K., Kaida K., Iwasaki M., On Bekk’s smoothness of paper, Japan TAPPI Journal, 20(2), 17 (1966). |