※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 9088 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業向けの炭素質製品によって作成されました。
1 スコープ
この国際規格は、アルミニウムの製造に使用される陰極ブロックおよび事前に裏打ちされた陽極のキシレン中の真の密度を決定するためのピクノメトリー法を規定しています。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3507:1976, 比重瓶。
- ISO 8007:1985, アルミニウムの製造に使用される炭素質材料 - 陰極ブロックおよび焼き付け済み陽極からのサンプリング - 一般。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9088 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry.
1 Scope
This International Standard specifies a pyknometric method for the determination of the true density in xylene of cathode blocks and prebacked anodes used for the production of aluminium.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3507:1976, Pyknometers.
- ISO 8007:1985, Carbonaceous materials used in the production of aluminium — Sampling from cathodic blocks and prebaked anodes — General.