※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 9142 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 11, 製品によって作成されました。
この第 2 版は、第 1 版 (ISO 9142:1990) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
1 スコープ
この国際規格は、特定の特性に対するそのような影響の影響を評価する目的で、接着接合部がさまざまな環境の影響 (気候または化学的影響) にさらされる可能性がある実験室の老化条件について説明しています。
エージング条件は接着されたアセンブリに適用でき、接着剤の評価のための一連の試験を構成するために使用できます。
この規格に記述された手順を使用して得られた結果は、試験結果と使用期間中の接着組立体の挙動との間に直接的な関係がないため、接着組立体の耐用年数の決定に必ずしも適用できるわけではありません。条件。ただし、特定のアプリケーションについては、手順の経験によって相関関係を確立できる場合があります。
注記エージング条件は、接着剤の特定の用途に関連していることが望ましい。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 175:1999, プラスチック — 液体化学薬品への浸漬の影響を決定するための試験方法
- ISO 291:1997, プラスチック - コンディショニングとテストのための標準大気
- ISO 483:1988, プラスチック — 水溶液を使用して相対湿度を一定値に維持するためのコンディショニングおよびテスト用の小型エンクロージャ
- ISO 3205:1976, 推奨試験温度
- ISO 4587:2003, 接着剤 — リジッド対リジッド接合アセンブリの引張り重ね剪断強度の測定
- ISO 4588:1995, 接着剤 — 金属の表面処理に関するガイドライン
- ISO 489, プラスチック — 実験室の光源への暴露方法
- ISO 6238:2001, 接着剤 — 木材と木材の接着結合 — 圧縮荷重によるせん断強度の測定
- ISO 9227:1990, 人工大気中での腐食試験 — 塩水噴霧試験
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9142 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This second edition cancels and replaces the first edition (ISO 9142:1990), of which it constitutes a minor revision.
1 Scope
This International Standard describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences — climatic or chemical — for the purpose of assessing the effects of such influences on certain properties.
The ageing conditions are applicable to bonded assemblies and may be used to constitute a set of tests for the evaluation of an adhesive.
The results obtained using the procedures described in this International Standard are not necessarily applicable to the determination of the service life of a bonded assembly because there is no direct relation between the test results and the behaviour of a bonded assembly over a period of time under service conditions. However, for certain specific applications, experience with the procedures may enable a correlation to be established.
NOTE The ageing conditions should preferably be related to the specific application of the adhesive.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 175:1999, Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 291:1997, Plastics — Standard atmospheres for conditioning and testing
- ISO 483:1988, Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
- ISO 3205:1976, Preferred test temperatures
- ISO 4587:2003, Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
- ISO 4588:1995, Adhesives — Guidelines for the surface preparation of metals
- ISO 4892 (all parts), Plastics — Methods of exposure to laboratory light sources
- ISO 6238:2001, Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading
- ISO 9227:1990, Corrosion tests in artificial atmospheres — Salt spray tests