この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
導入
国際規格 ISO 9459 は、家庭用太陽熱温水システムの国際比較を容易にするために開発されました。すべてのシステムに適用できる一般化された性能モデルはまだ開発されていないため、1 つのテスト方法と 1 つの標準的なテスト条件セットについて国際的な合意を得ることができませんでした。したがって、より広範囲に適用可能な手順を最終決定する作業が継続される一方で、現在利用可能な簡単な方法を公布することが決定されました。このアプローチの利点は、各部分が独自に処理を進めることができることです。
IS09459 は、以下に説明するように、3 つの大きなカテゴリ内の 5 つの部分に分かれています。
評価テスト
ISO 9459-1:1993, 太陽熱暖房 - 家庭用給湯システム - Part 1: 屋内試験方法を使用した性能評価手順には、標準化された一連の基準条件に対する 1 日間の試験が含まれます。したがって、その結果により、同一の太陽光、周囲条件、負荷条件下でシステムを比較することができます。
ブラックボックス相関手順
ISO 9459-2 は、太陽光発電専用システムおよび太陽光予熱システムに適用されます。太陽光発電のみのシステムの性能テストは、システムの一連の「入出力」特性を生成する「ブラック ボックス」手順です。テスト結果は、局所的な日射量や周囲空気の日次平均値と直接使用できます。年間のシステムパフォーマンスを予測するための温度と冷水温度のデータ。
ISO 9459-3 は太陽光発電と補助システムに適用されます。性能テストは、年間のシステム性能を予測するために、局所的な日射量、周囲気温、冷水温度のデータの毎日の平均値と使用できる相関式の係数を生成する「ブラック ボックス」手順です。このテストは、1 つの負荷パターンに対する年間パフォーマンスの予測に限定されています。
テストとコンピュータシミュレーション
ISO 9459-4 (年間システムパフォーマンスを特徴付ける手順) では、コンピューター シミュレーション プログラム「TRNSYS」で測定されたコンポーネントの特性が使用されます。コレクタ以外のシステムコンポーネントの性能を特徴付ける手順も、ISO 9459 のこの部分に示されています。コレクタの性能を特徴付ける手順は、他の国際規格に記載されています。
ISO 9459-5 は、コンピューター モデルで使用するシステム パラメーターを決定するための完全なシステムの動的テストの手順を示しています。このモデルは、年間のシステム パフォーマンスを予測するために、地域の日射量、周囲気温、冷水温度の時間値データとともに使用できます。
ISO 9459-2, ISO 9459-3, ISO 9459-4, および ISO 9459-5 で定義されている年間パフォーマンスを予測する手順により、さまざまな気象条件に対するシステムの出力を決定できます。
ISO 9459-1 に従って実行されたテストの結果は、標準的な日の評価を提供します。
ISO 9459-2 に従って実行されたテストの結果により、さまざまなシステム負荷および動作条件のパフォーマンスを予測できますが、それは夕方の低下のみに限られます。
ISO 9459-3 に従って実行されたテストの結果により、1 日の負荷パターンに対する年間システム パフォーマンスの予測が可能になります。
ISO 9459-4 または ISO 9459-5 に従って実行されたテストの結果は、直接比較できます。これらの手順により、さまざまなシステム負荷および動作条件のパフォーマンスを予測できます。
システムの信頼性と安全性は、ISO 11924:-、太陽熱暖房 - 家庭用給湯システム - 信頼性と安全性の評価のための試験方法で扱われます。
Introduction
International Standard ISO 9459 has been developed to help facilitate the international comparison of solar domestic water heating systems. Because a generalized performance model which is applicable to all systems has not yet been developed, it has not been possible to obtain an international consensus for one test method and one standard set of test conditions. It has therefore been decided to promulgate the currently available simple methods while work continues to finalize the more broadly applicable procedures. The advantage of this approach is that each part can proceed on its own.
IS09459 is divided into five parts within three broad categories, as described below.
Rating test
ISO 9459-1:1993, Solar heating - Domestic water heating systems - Part 1: Performance rating procedure using indoor test methods, involves testing for periods of one day for a standardized set of reference conditions. The results, therefore, allow systems to be compared under identical solar, ambient and load conditions.
Black box correlation procedures
ISO 9459-2 is applicable to solar-only systems and solar-preheat systems. The performance test for solar-only systems is a"black box" procedure which produces a family of"input-output" characteristics for a system. The test results may be used directly with daily mean values of local solar irradiation, ambient air temperature and cold water temperature data to predict annual system performance.
ISO 9459-3 applies to solar plus supplementary systems. The performance test is a"black box" procedure which produces coefficients in a correlation equation that can be used with daily mean values of local solar irradiation, ambient air temperature and cold water temperature data to predict annual system performance. The test is limited to predicting annual performance for one load pattern.
Testing and computer simulation
ISO 9459-4, a procedure for characterizing annual system performance, uses measured component characteristics in the computer simulation program"TRNSYS". Procedures for characterizing the performance of system components other than collectors are also presented in this part of ISO 9459. Procedures for characterizing the performance of collectors are given in other International Standards.
ISO 9459-5 presents a procedure for dynamic testing of complete systems to determine system parameters for use in a computer model. This model may be used with hourly values of local solar irradiation, ambient air temperature and cold water temperature data to predict annual system performance.
The procedures defined in ISO 9459-2, ISO 9459-3, ISO 9459-4 and ISO 9459-5 for predicting yearly performance allow the ouput of a system to be determined for a range of climatic conditions.
The results of tests performed in accordance with ISO 9459-1 provide a rating for a standard day.
The results of tests performed in accordance with ISO 9459-2 permit performance predictions for a range of system loads and operating conditions, but only for an evening draw-off.
The results of tests performed in accordance with ISO 9459-3 permit annual system performance predictions for one daily load pattern.
The results of tests performed in accordance with ISO 9459-4 or ISO 9459-5 are directly comparable. These procedures permit performance predictions for a range of system loads and operating conditions.
System reliability and safety will be dealt with in ISO 11924:-, Solar heating - Domestic water heating systems - Test methods for the assessment of reliability and safety.