※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 つの定義
この国際規格の目的のために、ISO 2389-9 で与えられた定義と以下の定義が適用されます。
3.1
同方向のタイミング
タイミング信号と関連するバイナリ信号 (データまたは制御) がインターフェイスを介して同じ方向に転送される構成 (図 7 を参照)
3.2
反対方向のタイミング
タイミング信号と関連するバイナリ信号 (データまたは制御) がインターフェイスを介して反対方向に転送される構成 (図 8 を参照)
3.3
信号要素のタイミング
信号要素の持続時間を決定し、同期伝送システム内で同期を達成するために使用される信号。
3.4
タイミングずれ
信号要素タイミングの重要な遷移とデータの関連するビット遷移の間の単位間隔までの時間。変位の程度は、通常、パーセンテージで表されます。
3.5
デューティサイクル
信号要素のタイミングでは、重要な遷移が発生する信号条件の持続時間。期間は通常、単位間隔のパーセンテージとして表されます。
3.6
信号要素
電信またはデータ信号を構成し、その性質、大きさ、持続時間、および相対位置によって (またはこれらの特徴の 1 つまたはいくつかのみによって) 他の部分と区別される部分のそれぞれ。
3.7
重要な瞬間
調整または復元の適切なデバイスによって認識される連続する重大な状態が始まる瞬間。
それぞれの瞬間は、適切なデバイスが記録または処理に使用できる重要な状態になるとすぐに決定されます。
3.8
有意間隔
連続する 2 つの重要な瞬間の間の時間間隔。
3.9
ジッター
デジタル信号の重要な瞬間の、理想的な時間位置からの短期変動の程度。
3.10
遷移
電報またはデータ信号において、ある重要な状態から別の状態への変化。
3.11
データ信号速度
データ伝送システムの伝送経路における 1 秒あたりの 2 進数 (ビット) 数の総計 (ISO 2382-9: 1984 の定義 09.06.01 の注を参照)
3.12
シリアル伝送
文字またはその他のデータ エンティティを表すグループの信号要素の順次送信。 (ISO 2382-9: 1984 の定義 09.03.04 を参照してください。)
3.13
同期伝送
ビットを表す各信号の発生時間が固定時間基準に関連付けられているデータ伝送。 (ISO 2382-9: 1984 の定義 09.03.12 を参照してください。)
3.14
同期 DCE
送信側と受信側の両方の DTE のインターフェイスで信号要素のタイミングが交換される場合、DCE は同期していると見なされます。
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 2389-9 and the following definitions apply.
3.1
codirectional timing
A configuration in which a timing signal and associated binary signals (data or control) are transferred in the same direction across the interface (see figure 7).
3.2
contradirectional timing
A configuration in which a timing signal and associated binary signals (data or control) are transferred in opposite directions across the interface (see figure 8).
3.3
signal element timing
A signal used to determine the duration of signal elements and to achieve synchronization within a synchronous transmission system.
3.4
timing displacement
Time to the unit interval between significant transitions of signal element timing and associated bit transitions of data. The degree of displacement is usually expressed as a percentage.
3.5
duty cycle
In signal element timing the duration of the signal condition from which a significant transition is originated. The duration is usually expressed as a percentage of the unit interval.
3.6
signal element
Each of the parts constituting a telegraph or data signal and distinguished from the others by its nature, magnitude, duration and relative position (or by one or some of these features only).
3.7
significant instants
The instants at which the successive significant conditions recognized by the appropriate device of the modulation or restitution begin.
Each of the instants is determined as soon as the appropriate device takes up the significant condition usable for a recording or a processing.
3.8
significant interval
Time interval between two consecutive significant instants.
3.9
jitter
The degree of short term variation of the significant instant of a digital signal from its ideal position in time.
3.10
transition
A change from one significant condition to another in a telegraph or a data signal.
3.11
data signalling rate
The aggregate of the number of binary digits (bits) per second in the transmission path of a data transmission system. (See the notes to definition 09.06.01 of ISO 2382-9: 1984.)
3.12
serial transmission
The sequential transmission of the signal elements of a group representing a character or other entity of data. (See definition 09.03.04 of ISO 2382-9: 1984.)
3.13
synchronous transmission
Data transmission in which the time of occurrence of each signal representing a bit is related to a fixed time base. (See definition 09.03.12 of ISO 2382-9: 1984.)
3.14
synchronous DCE
The DCE is considered to be synchronous if signal element timing is exchanged at the interface of both the transmitting and receiving DTE.