この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
4 つの定義
この国際規格の目的のために、次の定義が適用されます。
4.1
絶対フレーム番号
AFN
フレームにエンコードされたシーケンス番号。
4.2
エリアID
テープの領域を定義し、書き込まれたフレームの種類を指定する識別子。
4.3
自動トラック検索
ATF
追跡を実現する方法。
4.4
平均信号振幅
最小 7.8 mm のトラック上での指定された物理記録密度の基本周波数での読み取りヘッドからの出力信号の平均ピーク ツー ピーク値 (欠落パルスを除く)
4.5
方位角
平均フラックス遷移線と、記録されたトラックの中心線に垂直な線との角度偏差 (度、分、秒)
4.6
裏面
データを記録するために使用される磁気コーティングの反対側のテープの表面。
4.7
バイト
単位として作用するビットの順序付けられたセット。
4.8
カートリッジ
ツインハブに磁気テープを収納したケースです。
4.9
チャンネルビット
8-10変身後少し。
4.10
データフォーマットID
テープで使用されているデータ形式を指定する識別子。
4.11
早期警戒ポイント
EWP
テープの進行方向、パーティションの境界、またはテープの物理的終端に近づいていることを警告する、テープの長さに沿ったポイント。
4.12
データの終わり
EOD
最後のユーザー データを含む、グループの最後にあるテープ上のポイント。
4.13
エラー訂正コード
ECC
エラーの検出と訂正に使用されるチェック バイトを生成する数学的アルゴリズム。
4.14
磁束遷移位置
テープ表面に垂直な最大の自由空間磁束密度を示すポイント。
4.15
磁束遷移間隔
連続するフラックス遷移間のトラックに沿った距離。
4.16
フレーム
正の方位角を持つトラックが負の方位角を持つトラックよりも前にある、反対極性の方位角を持つ隣接するトラックのペア。
4.17
ハウスキーピング フレーム
ユーザーデータを含まず、その 中 のデータフィールドの値によってそのように識別されるフレーム。
4.18
テープの論理開始
LBOT
交換用のデータの記録が開始される、テープの長さに沿ったポイント。
4.19
磁気テープ
コンピュータおよび関連機器での入力、出力、および保存を目的とした磁気信号を受け入れて保持するテープ。
4.20
マスター標準振幅校正テープ
標準信号振幅が正のアジマス幅 23.0 μm のトラックに、公称トラック ピッチで ac 消去済みテープに記録されている、事前に記録されたテープ。
注記 1:テープには、83.4 ftpmm, 333.6 ftpmm, 500.4 ftpmm, 1,001 ftpmm, および 1,501 ftpmm で作成された録音が含まれています。
注記 2:マスター標準振幅校正テープは、ソニー株式会社によって確立されました。
4.21
マスター標準参照テープ
Reference Recording Field, Signal Amplitude, Resolution, Overwrite, SN比の基準として選ばれたテープ。
注記 1:マスター標準リファレンス テープは、ソニー株式会社によって確立されました。
4.22
最適記録フィールド
3002 ftpmm の物理記録密度での記録フィールドに対する平均信号振幅のプロットでは、平均信号振幅が最大になるフィールド。
4.23
パーティション境界
パーティション 1 が終了し、パーティション 0 が開始する、磁気テープの長さに沿ったポイント。
4.24
テープの物理的な始まり
PBOT
リーダーテープと磁気テープの接合点。
4.25
テープの物理的な終わり
ピート
トレーラー テープが磁気テープに接合されるポイント。
4.26
物理記録密度
トラックの単位長さあたりに記録されたフラックス遷移の数。ミリメートルあたりのフラックス遷移数 (ftpmm) で表されます。
4.27
録音前の状態
交換用のテープが以前に録音されていない録音レベル。
4.28
記録
情報の単位として扱われる関連データ。
4.29
参考記録欄
マスタースタンダードリファレンステープの最適記録領域。
4.30
JO 二次標準振幅校正テープ
マスター標準振幅校正テープの定義に従って事前に録音されたテープ。出力は既知であり、Master Standard Amplitude Calibration Tape の出力に関連して記述されています。
注記 1:二次標準振幅校正テープは、Sony Corporation, Audio Device Business Department, Component Marketing Group, 4-10-18, Minato-ku, Tokyo 108, Japan から注文できます。 TY-7000G の番号は 2000 年までです。これらは、定期的な校正で使用する 3 次基準テープの校正に使用することを目的としています。
4.31
二次標準参照テープ
マスター スタンダード リファレンス テープの性能との関連で、その性能が知られており、記載されているテープ。
注記 1:二次標準参照テープは、Sony Corporation, Major Customer Division, Magnetic Products Group, 6-7-35, Kitshinagawa, Shinagawa-ku, Tokyo 141, Japan から注文できます。番号 RSD 1079 は 2000 年までです。これらは、定期的な校正で使用する 3 次基準テープの校正に使用することを意図しています。
4.32
区切り記号
データを分離するために使用される、ユーザー データを含まないレコード。
4.33
標準基準振幅
指定された物理記録密度でのマスター標準振幅キャリブレーション テープの正の方位角のトラックからの平均信号振幅。
4.34
テープ基準エッジ
PEOT を観察者の右側にして、テープの記録面を見たときのテープの下端。
4.35
テスト記録電流
参照記録フィールドを生成する電流。
4.36
トラック
一連の磁気信号が記録される、テープの対角線上に位置する領域。
4.37
仮想テープの終わり
VEOT
交換用のデータを記録するために使用できるパーティション 1 の部分の終わりを定義する、パーティション 1 内の磁気テープの長さに沿った点。
第2節 事件の要件
セクション 3 未記録テープの要件
セクション 4 交換テープの要件
4 Definitions
For the purposes of this International Standard, the following definitions apply.
4.1
Absolute Frame Number
AFN
A sequence number, encoded in the frame.
4.2
Area ID
An identifier defining the area of the tape and specifying the types of frame written.
4.3
Automatic Track Finding
ATF
The method by which tracking is achieved.
4.4
Average Signal Amplitude
The average peak-to-peak value of the output signal from the read head at the fundamental frequency of the specified physical recording density over a minimum of 7,8 mm of track, exclusive of missing pulses.
4.5
azimuth
The angular deviation, in degrees, minutes and seconds of arc, made by the mean flux transition line with the line normal to the centreline of the recorded track.
4.6
back surface
The surface of the tape opposite to the magnetic coating which is used to record data.
4.7
byte
An ordered set of bits acted upon as a unit.
4.8
cartridge
A case containing magnetic tape stored on twin hubs.
4.9
Channel Bit
A bit after 8-10 transformation.
4.10
Data Format ID
An identifier specifying which data format is being used on the tape.
4.11
Early Warning Point
EWP
A point along the length of the tape at which warning is given of the approach, in the forward direction of tape motion, of the partition boundary or of the Physical End of Tape.
4.12
End of Data
EOD
The point on the tape at the end of the group which contains the last user data.
4.13
Error Correcting Code
ECC
A mathematical algorithm yielding check bytes used for the detection and correction of errors.
4.14
flux transition position
That point which exhibits maximum free-space flux density normal to the tape surface.
4.15
flux transition spacing
The distance along a track between successive flux transitions.
4.16
frame
A pair of adjacent tracks with azimuths of opposite polarity, in which the track with the positive azimuth precedes that with the negative azimuth.
4.17
Housekeeping Frame
A frame which contains no user data and which is identified as such by the values in the data fields therein.
4.18
Logical Beginning of Tape
LBOT
The point along the length of the tape where a recording of data for interchange commences.
4.19
magnetic tape
A tape which will accept and retain the magnetic signals intended for input, output and storage purposes on computers and associated equipment.
4.20
Master Standard Amplitude Calibration Tape
A pre-recorded tape on which the standard signal amplitudes have been recorded in the tracks of positive azimuth, 23,0 μm wide, at nominal track pitch, on an a.c.-erased tape.
Note 1 to entry: The tape includes recordings made at 83,4 ftpmm, 333,6 ftpmm, 500,4 ftpmm, 1 001 ftpmm and 1 501 ftpmm.
Note 2 to entry: The Master Standard Amplitude Calibration Tape has been established by Sony Corporation.
4.21
Master Standard Reference Tape
A tape selected as the standard for Reference Recording Field, Signal Amplitude, Resolution, Overwrite and Signal-to-Noise Ratio.
Note 1 to entry: The Master Standard Reference Tape has been established by Sony Corporation.
4.22
Optimum Recording Field
In the plot of Average Signal Amplitude against the recording field at the physical recording density of 3 002 ftpmm, the field that causes the maximum Average Signal Amplitude.
4.23
partition boundary
The point along the length of a magnetic tape at which partition 1 ends and partition 0 commences.
4.24
Physical Beginning of Tape
PBOT
The point where the leader tape is joined to the magnetic tape.
4.25
Physical End of Tape
PEOT
The point where the trailer tape is joined to the magnetic tape.
4.26
physical recording density
The number of recorded flux transitions per unit length of track, expressed in flux transitions per millimetre (ftpmm).
4.27
pre-recording condition
The recording levels above which a tape intended for interchange shall not previously have been recorded.
4.28
record
Related data treated as a unit of information.
4.29
Reference Recording Field
The Optimum Recording Field of the Master Standard Reference Tape.
4.30
JO Secondary Standard Amplitude Calibration Tape
A tape pre-recorded as defined for the Master Standard Amplitude Calibration Tape; the outputs are known and stated in relation to those of the Master Standard Amplitude Calibration Tape.
Note 1 to entry: Secondary Standard Amplitude Calibration Tapes can be ordered from Sony Corporation, Audio Device Business Department, Component Marketing Group, 4-10-18, Takanawa, Minato-ku, Tokyo 108, Japan, under Number TY-7000G until the year 2000. It is intended that these be used for calibrating tertiary reference tapes for use in routine calibration.
4.31
Secondary Standard Reference Tape
A tape the performance of which is known and stated in relation to that of the Master Standard Reference Tape.
Note 1 to entry: Secondary Standard Reference Tapes can be ordered from Sony Corporation, Major Customer Division, Magnetic Products Group, 6-7-35, Kitashinagawa, Shinagawa-ku, Tokyo 141, Japan, under Number RSD 1079 until the year 2000. It is intended that these be used for calibrating tertiary reference tapes for use in routine calibration.
4.32
Separator Mark
A Record containing no user data, which is used to separate data.
4.33
Standard Reference Amplitude
The Average Signal Amplitude from the tracks of positive azimuth of the Master Standard Amplitude Calibration Tape at a specified physical recording density.
4.34
Tape Reference Edge
The bottom edge of the tape when viewing the recording side of the tape, with the PEOT to the observer's right.
4.35
Test Recording Current
The current that produces the Reference Recording Field.
4.36
track
A diagonally positioned area on the tape along which a series of magnetic signals may be recorded.
4.37
Virtual End of Tape
VEOT
The point along the length of the magnetic tape within partition 1 which defines the end of the part of partition 1 which is usable for recording data for interchange.