ISO/IEC 13247:1997 情報技術—システム間の電気通信と情報交換—ブロードバンドプライベート統合サービスネットワーク—交換信号プロトコル—基本的な通話/接続制御 | ページ 6

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

4 つの定義

この国際規格の目的のために、次の定義が適用されます。

4.1 PNNI 1.0 の定義

PNNI 1.0 のセクション 2.2 および 6.1 に含まれる参照は、PNNI 1.0 のルーティング セクションに適用される定義を除き、またこの国際規格の 4.2 および 4.3 に置換定義がある用語を除き、適用されます。

PNNI 1.0 のテキストがこの国際規格から参照されている場合、参照テキスト内で使用されている用語は表 1 に示されているように解釈されます。

表 1 — PNNI 用語の解釈

PNNI 参照テキストで使用される用語この国際規格の目的に沿った解釈
ネットワークノードPINX
電話通話/接続
論理リンクPINX 間リンク (IPL)
物理リンクPINX 間リンク (IPL)
仮想チャネル識別子 (VCI)PINX 間仮想チャネル識別子 (IPVCI)
仮想パス識別子 (VPI)PINX 間仮想パス識別子 (IVPI)
PNNIインターフェースPINX 間リンク (IPL)
PNNIリンクPINX 間リンク (IPL)

4.2 その他の外部定義

この国際規格では、他の文書で定義されている次の用語を使用します。

ATM転送能力(ATC)(ITU-T 勧告 I.371)
繋がり(CCITT 勧告 Q.9)
Q5(ITU-T 勧告 I.610)
プライベート統合サービス ネットワーク (PISN)(ISO/IEC 11579-1)
プライベート統合サービスネットワーク交換機 (PINX)(ISO/IEC 11579-1)
合図(CCITT 勧告 I.112)
ユーザープレーン(CCITT 勧告 I.321)

4.3 その他の定義

4.3.1

ATMエンドシステムアドレス

ATM ネットワークへの接続ポイントのアドレス。

4.3.2

ブロードバンドプライベート統合サービスネットワーク

B-PISN

ユーザーに ATM サービスを提供し、PINX と ATM スイッチング間の ATM 伝送を使用する PIS

4.3.3

電話

電気通信サービスの使用または使用を試みるための 2 人以上のユーザー間の関連付け。

4.3.4

通話/接続

ユーザー情報を転送するために、ユーザー プレーン内の単一の接続と組み合わせた呼び出し。

4.3.5

一括して

すべての着信側番号桁が最初のメッセージで送信される、着信側番号情報をシグナリングする方法。

4.3.6

ゲートウェイPINX

通話/接続のコンテキスト内で、B-QSIG と別のシグナリング システムの間のインターワーキングを実行する PIN

4.3.7

着信/接続

IPL の成功側の観点から見た、IPL を使用した呼び出し/接続。

4.3.8

受信ゲートウェイPINX

別のシグナリング システムを使用するルートから B-QSIG シグナリングを使用する IPL にコール/接続をルーティングするゲートウェイ PIN

4.3.9

情報要素

メッセージのコンポーネント。

4.3.10

無効な内容を含む情報要素

認識されているが、この国際規格の第 8 項で指定されている規則を使用してその内容を有効なものとして解釈できない情報要素、またはこの国際規格の第 8 項で「予約済み」とマークされているフィールド値を含む情報要素。

4.3.11

PINX 間リンク

IPL

2つのPINXのQ基準点間のリンク。このリンクは、シグナリングIPVCと、そのシグナリングIPVCの制御下にある1つ以上のユーザ情報IPVCとを備える。

4.3.12

PINX 間仮想チャネル

IPVC

2 つの PINX 間で、ATM 層で多重化されたデジタル情報の多数の双方向転送の 1 つ。

注 1: IPVC は、単一の仮想チャネルまたは仮想チャネルの連結にすることができます。

4.3.13

PINX 間仮想チャネル識別子

IPVCI

IPVP のコンテキスト内で IPVC を識別する整数。

4.3.14

PINX 間仮想パス

IPVP

単一 IPL 内の 1 つ以上の IPVC のグループ。

4.3.15

PINX 間仮想パス識別子

IPVPI

IPL のコンテキスト内で IPVP を識別する整数。

4.3.16

インターワーキングPINX

通話/接続のコンテキスト内で、B-PISN と N-PISN の間のインターワーキングを実行する PIN

注記 1:インターワーキング PINX は、発信 PINX, 着信 PINX, またはゲートウェイ PINX のいずれかになります。

4.3.17

狭帯域プライベート統合サービス ネットワーク

N-PISN

ユーザーに 64 kbit/s ベースのサービスのみを提供する PIS

4.3.18

発信元PINX

通話/接続のコンテキスト内で、発信ユーザーが接続されている PIN

4.3.19

発信/接続

IPL の前側の観点から見た、IPL を使用した呼び出し/接続。

4.3.20

発信ゲートウェイPINX

B-QSIG シグナリングを使用する IPL からの着信コール/接続を、別のシグナリング システムを使用するルートにルーティングするゲートウェイ PIN

4.3.21

重なり合う

すべての着信側番号情報が同じメッセージで送信されるわけではない、着信側番号情報をシグナリングする方法。

4.3.22

前のPINX

IPL を使用した呼び出し/接続のコンテキスト内で、IPL の成功側が属する PINX の観点から見た、IPL の先行側が属する PIN

4.3.23

前側

IPL を使用した呼び出し/接続のコンテキストでは、その IPL を介して呼び出し/接続の確立を開始する側。

4.3.24

公共ブロードバンド ISDN

公衆B-ISDN

ユーザーに ATM サービスを提供し、ATM 伝送および交換機を使用する公衆 ISD

4.3.25

公共総合サービスデジタルネットワーク

公衆ISDN

デジタル接続を使用してさまざまな電気通信サービスを一般大衆に提供するネットワーク。

4.3.26

公衆狭帯域 ISDN

公衆 N-ISDN

一般大衆に 64 kbit/s ベースのサービスのみを提供する公衆 ISD

4.3.27

IPL の一端にある PINX のプロトコル制御エンティティ。

4.3.28

AAL のシグナリング

部屋

レイヤ 3 シグナリング情報の双方向転送に使用される AA

4.3.29

成功したPINX

IPL を使用した呼び出し/接続のコンテキスト内で、IPL の先行側が属する PINX の観点から見た、IPL の成功側が属する PIN

4.3.30

成功した側

IPL を使用した呼び出し/接続のコンテキストでは、その IPL を介して呼び出し/接続の確立を開始する側の反対側。

4.3.31

PINX の終了

通話/接続のコンテキスト内で、着信側のユーザーが接続されている PIN

4.3.32

トランジットPINX

通話/接続のコンテキスト内で、通話/接続が通過するすべての PINX (発信 PINX, 着信 PINX, 着信ゲートウェイ PINX, または発信ゲートウェイ PINX を除く)

4.3.33

予期せぬメッセージ

特定のプロトコル制御状態のコンテキスト内で、認識されるが、この国際規格の 9.6 (または PINX が準拠を主張する B-QSIG に関連する他の規格) で受信するための手順が定義されていないメッセージ。プロトコル制御状態。

4.3.34

認識されない情報要素

この国際規格の第 7 項、または PINX が準拠を主張する B-QSIG に関連する他の規格 (例: 補足のための一般的な手順を指定する規格など) のメッセージの一部として指定されていない、特定のメッセージで受信された情報要素サービス)。

注記 1:国内/個人情報要素の取り扱いは、この国際規格の範囲外である (附属書 H を参照)

4.3.35

認識できないメッセージ

この国際規格の第 7 項、または PINX が準拠を主張する B-QSIG に関連する他の規格 (例: 補足サービスの一般手順を指定する規格) に指定されていないメッセージ。

注記 1:国内/私的メッセージの処理は、この国際規格の範囲外である (付録 H を参照)

4.3.36

指定されていないビットレート

UBR

トラフィック関連のサービス保証が指定されていない ATM サービス カテゴリ。

4.3.37

仮想チャンネル

2 つの ATM スイッチング ポイント間のインターフェイスを介して ATM 層によって提供されるデジタル データの多数の多重化された双方向転送のうちの 1 つ。

4.3.38

仮想チャネル接続

ATM アダプテーション層where アクセスされる 2 つのポイント間に広がる仮想チャネルの連結。

図 1 — 2 つの PINX 間リンクを介してルーティングされるコール/接続の例による用語の説明

図1

4 Definitions

For the purposes of this International Standard, the following definitions apply.

4.1 Definitions in PNNI 1.0

References contained in sections 2.2 and 6.1 of PNNI 1.0 are applicable with the exception of the definitions applicable to the routing sections of PNNI 1.0 and with the exception of terms for which there are replacement definitions in 4.2 and 4.3 of this International Standard.

Where text of PNNI 1.0 is referenced from this International Standard, terms used within the referenced text shall be interpreted a shown in Table 1.

Table 1 — Interpretation of PNNI terms

Term used in PNNI referenced textInterpretation for the purposes of this International Standard
network nodePINX
callcall/connection
logical linkinter-PINX link (IPL)
physical linkinter-PINX link (IPL)
virtual channel identifier (VCI)inter-PINX virtual channel identifier (IPVCI)
virtual path identifier (VPI)inter-PINX virtual path identifier (IPVPI)
PNNI interfaceinter-PINX link (IPL)
PNNI linkinter-PINX link (IPL)

4.2 Other external definitions

This International Standard uses the following terms defined in other documents:

ATM transfer capability (ATC)(ITU-T Rec. I.371)
connection(CCITT Rec. Q.9)
F5(ITU-T Rec. I.610)
private integrated services network (PISN)(ISO/IEC 11579-1)
private integrated services network exchange (PINX)(ISO/IEC 11579-1)
signalling(CCITT Rec. I.112)
user plane(CCITT Rec. I.321)

4.3 Other definitions

4.3.1

ATM endsystem address

the address of a point of attachment to an ATM network.

4.3.2

broadband private integrated services network

B-PISN

a PISN that offers ATM services to its users and employs ATM transmission between PINXs and ATM switching.

4.3.3

call

an association between two or more users for the use or attempted use of a telecommunication service.

4.3.4

call/connection

a call combined with a single connection in the user plane for the transfer of user information.

4.3.5

en bloc

a method of signalling the called party number information in which all called party number digits are sent in the first message.

4.3.6

gateway PINX

within the context of a call/connection, a PINX which performs interworking between B-QSIG and another signalling system.

4.3.7

incoming call/connection

a call/connection using an IPL from the point of view of the succeeding side of that IPL.

4.3.8

incoming gateway PINX

a Gateway PINX that routes a call/connection from a route employing another signalling system on to an IPL employing B-QSIG signalling.

4.3.9

information element

a component of a message.

4.3.10

information element with invalid contents

an information element that is recognized, but whose contents cannot be interpreted as valid using the rules specified in clause 8 of this International Standard, or that contains field values that are marked as «reserved» in clause 8 of this International Standard.

4.3.11

inter-PINX link

IPL

a link between the Q reference points of two PINXs, the link comprising a signalling IPVC together with one or more user information IPVCs under the control of that signalling IPVC.

4.3.12

inter-PINX virtual channel

IPVC

one of a number of bi-directional transfers of digital information, multiplexed at the ATM layer, between two PINXs.

Note 1 to entry: An IPVC can be a single virtual channel or a concatenation of virtual channels.

4.3.13

inter-PINX virtual channel identifier

IPVCI

an integer that identifies an IPVC within the context of an IPVP.

4.3.14

inter-PINX virtual path

IPVP

a grouping of one or more IPVCs within a single IPL.

4.3.15

inter-PINX virtual path identifier

IPVPI

an integer that identifies an IPVP within the context of an IPL.

4.3.16

interworking PINX

within the context of a call/connection, a PINX that performs interworking between a B-PISN and a N-PISN.

Note 1 to entry: An interworking PINX will also be either an Originating PINX, a Terminating PINX or a Gateway PINX.

4.3.17

narrow-band private integrated services network

N-PISN

a PISN that offers only 64 kbit/s-based services to its users.

4.3.18

originating PINX

within the context of a call/connection, the PINX to which the calling user is attached.

4.3.19

outgoing call/connection

a call/connection using an IPL from the point of view of the preceding side of that IPL.

4.3.20

outgoing gateway PINX

a Gateway PINX that routes an incoming call/connection from an IPL employing B-QSIG signalling on to a route employing another signalling system.

4.3.21

overlap

a method of signalling the called party number information in which not all called party number information is sent in the same message.

4.3.22

preceding PINX

within the context of a call/connection using an IPL, the PINX to which the preceding side of the IPL belongs, from the point of view of the PINX to which the succeeding side of the IPL belongs.

4.3.23

preceding side

in the context of a call/connection using an IPL, the side that initiates call/connection establishment over that IPL.

4.3.24

public broadband ISDN

public B-ISDN

a public ISDN that offers ATM services to its users and employs ATM transmission and switching.

4.3.25

public integrated services digital network

public ISDN

a network that provides to the general public a range of different telecommunication services using digital connections.

4.3.26

public narrow-band ISDN

public N-ISDN

a public ISDN that offers to the general public only 64 kbit/s-based services.

4.3.27

side

the Protocol Control entity in a PINX at one end of an IPL.

4.3.28

signalling AAL

SAAL

the AAL used for the bi-directional transfer of layer 3 signalling information.

4.3.29

succeeding PINX

within the context of a call/connection using an IPL, the PINX to which the succeeding side of the IPL belongs, from the point of view of the PINX to which the preceding side of the IPL belongs.

4.3.30

succeeding side

in the context of a call/connection using an IPL, the opposite side from the side that initiates call/connection establishment over that IPL.

4.3.31

terminating PINX

within the context of a call/connection, the PINX to which the called user is attached.

4.3.32

transit PINX

within the context of a call/connection, any PINX through which the call/connection passes, excluding any Originating PINX, Terminating PINX, Incoming Gateway PINX or Outgoing Gateway PINX.

4.3.33

unexpected message

within the context of a particular Protocol Control state, a message that is recognized, but for which no procedures are defined in 9.6 of this International Standard (or in any other Standard relating to B-QSIG to which the PINX claims conformance) for receipt in that Protocol Control state.

4.3.34

unrecognized information element

an information element received in a particular message which is not specified as part of that message in clause 7 of this International Standard or in any other Standard relating to B-QSIG to which the PINX claims conformance (e.g., a Standard specifying generic procedures for supplementary services).

Note 1 to entry: The handling of national/private information elements is outside the scope of this International Standard (see annex H).

4.3.35

unrecognized message

a message that is not specified in clause 7 of this International Standard or in any other Standard relating to B-QSIG to which the PINX claims conformance (e.g., a Standard specifying generic procedures for supplementary services).

Note 1 to entry: The handling of national/private messages is outside the scope of this International Standard (see annex H).

4.3.36

unspecified bit rate

UBR

an ATM service category for which no traffic-related service guarantees are specified.

4.3.37

virtual channel

one of a number of multiplexed, bi-directional transfers of digital data provided by the ATM layer across an interface between two ATM switching points.

4.3.38

virtual channel connection

a concatenation of virtual channels that extends between two points where the ATM adaptation layer is accessed.

Figure 1 — Illustration of terminology through example of a call/connection routed over two inter-PINX links

Figure_1