この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
- 1) ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界的な標準化のための専門的なシステムを形成します。 ISO または IEC のメンバーである国家機関は、国際規格の開発に参加しています。それらの準備は技術委員会に委ねられています。扱われる主題に関心のある ISO および IEC 加盟団体は、この準備作業に参加することができます。 ISO および IEC と連携している国際的な政府および非政府組織も、この準備に参加しています。
- 2)情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
- 3)各技術委員会は、関心のあるすべての IEC および ISO メンバー団体からの代表者を持っているため、技術的事項に関する IEC および ISO の正式な決定または合意は、関連する主題に関する国際的な意見の一致を可能な限り表現します。
- 4) IEC, ISO, および ISO/IEC の出版物は、国際的な使用のための推奨事項の形をしており、その意味で IEC および ISO のメンバー団体によって受け入れられています。 IEC, ISO, および ISO/IEC 出版物の技術的内容が正確であることを保証するためにあらゆる合理的な努力が払われていますが、IEC または ISO は、それらの使用方法またはエンドユーザーによる誤解に対して責任を負うことはできません。
- 5)国際的な統一性を促進するために、IEC および ISO のメンバー団体は、IEC, ISO, および ISO/IEC の出版物を可能な限り透過的に国内および地域の出版物に適用することを約束します。 ISO/IEC 出版物と対応する国または地域の出版物との間の相違は、後者で明確に示されるべきです。
- 6) ISO および IEC は、承認を示すためのマーキング手順を提供しておらず、ISO/IEC 出版物に適合していると宣言された機器について責任を負うことはできません。
- 7)すべてのユーザーは、この出版物の最新版を持っていることを確認する必要があります。
- 8) IEC または ISO またはその取締役、従業員、使用人または代理店 (個々の専門家および技術委員会のメンバーを含む) および IEC または ISO のメンバー団体は、人身傷害、物的損害、またはその他のいかなる性質の損害についても、責任を負わないものとします。この ISO/IEC 刊行物またはその他の IEC, ISO, または ISO/IEC 刊行物の発行、使用、または依存から生じる直接的または間接的、または費用 (弁護士費用を含む) および費用。
- 9)この刊行物で引用されている規範的な参考文献に注意が必要です。この刊行物を正しく適用するには、参照されている刊行物を使用することが不可欠です。
IEC と ISO は、この文書への準拠には 6.6.2 に関する特許の使用が含まれる可能性があると主張されているという事実に注意を向けています。
Hager Control SAS は、IEC および ISO に、以下にリストされている特許を申請または付与したことを通知しました。
EP 1 239 648 A1
ISO および IEC は、この推定上の特許権の証拠、有効性、および範囲に関して、いかなる立場も取りません。この推定上の特許権の所有者は、IEC と ISO に対し、世界中の申請者と合理的かつ非差別的な条件の下で自由なライセンスまたはライセンスを交渉する用意があることを保証しました。この点で、この推定特許権の所有者の声明は、IEC および ISO に登録されています。情報は以下から取得できます。
ヘイガー コントロールズ SAS
33, rue Saint Nicolas
PB154
F-67704 サベルヌ・セデックス
フランス
このドキュメントの一部の要素が、上記以外の特許権の対象となる可能性があることに注意してください。 IEC および ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO/IEC 14543-3-7 は、ISO/IEC 合同技術委員会 1: 情報技術の小委員会 25: 情報技術機器の相互接続によって作成されました。
この国際規格は、製品ファミリー規格です。 ISO/IEC 14543-2-1, 14543-3-3, 14543-3-4, 14543-3-5, および 14543-3-6 と組み合わせて使用する必要があります。
この国際規格はメンバー団体の投票によって承認されており、投票結果はタイトル ページに記載されているアドレスから入手できます。
この出版物は、ISO/IEC 指令に従って起草されています。 2.
FOREWORD
- 1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards. Their preparation is entrusted to technical committees; any ISO and IEC member body interested in the subject dealt with may participate in this preparatory work. International governmental and non-governmental organizations liaising with ISO and IEC also participate in this preparation.
- 2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
- 3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC and ISO member bodies.
- 4) IEC, ISO and ISO/IEC Publications have the form of recommendations for international use and are accepted by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC, ISO and ISO/IEC Publications is accurate, IEC or ISO cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
- 5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and ISO/IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any ISO/IEC Publication and the corresponding national or regional publication should be clearly indicated in the latter.
- 6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for any equipment declared to be in conformity with an ISO/IEC Publication.
- 7) All users should ensure that they have the latest edition of this publication.
- 8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts and members of their technical committees and IEC or ISO member bodies for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or any other IEC, ISO or ISO/IEC publications.
- 9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.
IEC and ISO draw attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning 6.6.2.
Hager Control SAS has informed IEC and ISO that it has the patent applications or granted patents as listed below:
EP 1 239 648 A1
ISO and IEC take no position concerning the evidence, validity and scope of this putative patent right. The holder of this putative patent right has assured IEC and ISO that they are willing to negotiate free licences or licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this putative patent right is registered with IEC and ISO. Information may be obtained from:
Hager Controls SAS
33, rue Saint-Nicolas
PB 154
F-67704 Saverne Cedex
France
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC and ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 14543-3-7 was prepared by subcommittee 25: Interconnection of information technology equipment, of ISO/IEC joint technical committee 1: Information technology.
This International Standard is a product family standard. It shall be to be used in conjunction with ISO/IEC 14543-2-1, 14543-3-3, 14543-3-4, 14543-3-5 and 14543-3-6.
This International Standard has been approved by vote of the member bodies, and the voting results may be obtained from the address given on the title page.
This publication has been drafted in accordance with the ISO/IEC Directives, 2.