この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
このおすすめ |国際規格は次のように規定しています。
- a)接続指向ネットワーク サービス上で動作する場合の手順の 2 つのモード:
- 1)モード 0: ネットワークで通知されたエラーに作用します。
- 2)モード 4: ネットワークで通知されたエラーを無視します。1 つのトランスポート エンティティからピア トランスポート エンティティへのデータおよび制御情報の接続指向転送用。
b)トランスポートエンティティによって使用される手順のモードを選択する手段。
c)データと制御情報の転送に使用される TPDU の構造と符号化。
手順は次のように定義されています。
- a) TPDU の交換によるピアトランスポートエンティティ間の相互作用。
- b)トランスポート サービス プリミティブの交換による、同じシステム内のトランスポート エンティティとトランスポート サービス ユーザ間の相互作用。
- c)ネットワーク サービス プリミティブの交換によるトランスポート エンティティとネットワーク サービス プロバイダ間の相互作用。
これらの手順は、OSI 参照モデルのトランスポート層をサポートし、Transport Fast Byte Protocol を使用してオープン システム環境で相互接続したいシステム間の通信のインスタンスに適用できます。
このおすすめ |国際規格は、第 8 節で、これらの手順を実装するシステムの適合要件を指定し、関連要件に準拠し、ITU-T Rec. X.296 および ISO/IEC 9646 で与えられた関連ガイダンスに従って、PICS プロフォーマを提供します。 -この適合性を実証するために使用できるテストは含まれていません。
1 Scope
This Recommendation | International Standard specifies:
- a) Two modes of procedures when operating over the connection oriented network service:
- 1) mode 0: acts on network signalled errors;
- 2) mode 4: ignores network signalled errors,for the connection oriented transfer of data and control information from one transport entity to a peer transport entity.
b) The means of selecting the mode of procedures to be used by the transport entities.
c) The structure and encoding of the TPDUs used for the transfer of data and control information.
The procedures are defined in terms of:
- a) the interactions between peer transport entities through the exchange of TPDUs;
- b) the interactions between a transport entity and the transport service user in the same system through the exchange of transport service primitives;
- c) the interactions between a transport entity and the network service provider through the exchange of network service primitives.
These procedures are applicable to instances of communication between systems which support the Transport Layer of the OSI Reference Model and wish to interconnect in the open systems environment using the Transport Fast Byte Protocol.
This Recommendation | International Standard specifies, in clause 8, conformance requirements for systems implementing these procedures and provides the PICS proforma in compliance with the relevant requirements, and in accordance with the relevant guidance, given in ITU-T Rec. X.296 and ISO/IEC 9646-7. It does not contain tests which can be used to demonstrate this conformance.