この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
前書き
この国際規格には、以下が含まれます。
箇条 1 では、範囲について説明します。
箇条 2 は、規格全体の規範的な参照を提供します。
箇条 3 は、規格全体で使用される定義、略語、および規則を提供します。
箇条 4 では、モデルについて説明します。
箇条 5 では、USB 要件について説明します。
箇条 6 では、トランスポート要件 (IU など) について説明します。
箇条 7 では、SCSI アプリケーション層トランスポート プロトコル サービスについて説明します。
条項 8 では、デバイス サーバーのエラー処理について説明します。
SCSI 標準ファミリ
図 1 は、この規格が発行された時点での、この規格と SCSI ファミリ規格の他の規格および関連プロジェクトとの関係を示しています。
図 1 — SCSI ドキュメントの構造
図 1 の SCSI 文書構造は、相互の文書の一般的な適用可能性を示すことを目的としています。図 1 は、階層、プロトコル スタック、またはシステム アーキテクチャなどの関係を示唆するものではありません。
SCSI アーキテクチャ モデル: SCSI システム モデル、SCSI 標準セットの機能分割、およびすべての SCSI 実装と実装標準に適用される要件を定義します。
Device-Type Specific Command Sets: 各デバイス タイプのデバイス モデルを含む特定のデバイス タイプを定義する実装標準。これらの規格は、特定のデバイス タイプに固有の必要なコマンドと動作を指定し、特定のデバイス タイプを持つ SCSI ターゲット デバイスにコマンドを送信する際に SCSI イニシエータ デバイスが従う必要のある要件を規定しています。特定のデバイス タイプのコマンドと動作には、すべての SCSI デバイスで共有される参照コマンドと動作が含まれる場合があります。
Shared Command Set: すべての SCSI デバイス タイプのモデルを定義する実装標準。この規格は、デバイス タイプに関係なく、すべての SCSI デバイスに共通の必要なコマンドと動作を指定し、コマンドを SCSI ターゲット デバイスに送信する際に SCSI イニシエータ デバイスが従うべき要件を規定しています。
SCSI トランスポート プロトコル: さまざまな SCSI デバイスが通信できるように情報を交換するための要件を定義する実装標準。
相互接続: SCSI トランスポート プロトコルで使用される通信メカニズムを定義する実装標準。これらの規格は、SCSI デバイスが特定の相互接続を介して相互運用するために不可欠な電気的および信号の要件を記述している場合があります。相互接続規格では、この規格の範囲外の方法で SCSI デバイス以外のデバイスの相互接続を許可する場合があります。
SCSI という用語は、この概要で説明されている一連の標準を指すために使用されます。
INTRODUCTION
This International Standard standard encompasses the following:
Clause 1 describes the scope.
Clause 2 provides normative references for the entire standard.
Clause 3 provides definitions, abbreviations, and conventions used within the entire standard.
Clause 4 describes the model.
Clause 5 describes USB requirements.
Clause 6 describes transport requirements (e.g., IUs).
Clause 7 describes the SCSI Application Layer Transport Protocol Services.
Clause 8 describes device server error handling.
SCSI standards family
Figure 1 shows the relationship of this standard to the other standards and related projects in the SCSI family of standards as of the publication of this standard.
Figure 1—SCSI document structure
The SCSI document structure in figure 1 is intended to show the general applicability of the documents to one another. Figure 1 is not intended to imply a relationship such as a hierarchy, protocol stack, or system architecture.
SCSI Architecture Model: Defines the SCSI systems model, the functional partitioning of the SCSI standard set and requirements applicable to all SCSI implementations and implementation standards.
Device-Type Specific Command Sets: Implementation standards that define specific device types including a device model for each device type. These standards specify the required commands and behaviors that are specific to a given device type and prescribe the requirements to be followed by a SCSI initiator device when sending commands to a SCSI target device having the specific device type. The commands and behaviors for a specific device type may include by reference commands and behaviors that are shared by all SCSI devices.
Shared Command Set: An implementation standard that defines a model for all SCSI device types. This standard specifies the required commands and behavior that is common to all SCSI devices, regardless of device type, and prescribes the requirements to be followed by a SCSI initiator device when sending commands to any SCSI target device.
SCSI Transport Protocols: Implementation standards that define the requirements for exchanging information so that different SCSI devices are capable of communicating.
Interconnects: Implementation standards that define the communications mechanism employed by the SCSI transport protocols. These standards may describe the electrical and signaling requirements essential for SCSI devices to interoperate over a given interconnect. Interconnect standards may allow the interconnection of devices other than SCSI devices in ways that are outside the scope of this standard.
The term SCSI is used to refer to the family of standards described in this introduction.