この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、ネットワーク内で相互に接続された私設統合サービス ネットワーク交換機 (PINX) 間の Q 基準点で、通話優先度割り込み (SS-CPI) および通話優先度割り込み保護 (SS-CPIP) 補助サービスをサポートするためのシグナリング プロトコルを指定します。プライベート統合サービス ネットワーク (PISN)
注 1 —この国際規格のこの版は、回線モードのマルチレート ベアラ サービスを使用する呼には適用されません。
SS-CPI を使用すると、利用可能なユーザー情報チャネルがない場合でも、優先通話の通話要求を正常に処理できます。これは、優先度の低い確立されたコールを強制的に解放することによって実現されます。
SS-CPIP を使用すると、優先通話による割り込みから通話を保護できます。
Q 基準点は、ISO/IEC 11579-1 で定義されています。
サービス仕様は、ETS 300 387 で指定された方法に従って 3 段階で作成されます。この国際規格には、Q 基準点の第 3 段階の仕様が含まれており、ISO/IEC 15991 の第 1 段階および第 2 段階の仕様によって特定された要件を満たしています。
SS-CPI(P) のシグナリング プロトコルは、ISO/IEC 11572 で指定されているように、基本的な回線交換呼制御のシグナリング プロトコルの上で動作し、ISO/IEC 11572 で指定されている補足サービスの制御のための一般的な手順の特定の側面を使用します。 IEC 1158
この国際規格は、SS-CPI(P) と他の補足サービスおよび ANF との間の Q 基準点での相互作用をサポートするための追加のシグナリング プロトコル要件も指定します。
注 2 — Q 基準点でシグナリング プロトコルに影響を与えない追加の相互作用は、関連するステージ 1 仕様で見つけることができます。
この国際規格は、相互接続して PISN を形成できる PINX に適用されます。
1 Scope
This International Standard specifies the signalling protocol for the support of the Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP) supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
NOTE 1 — This edition of this International Standard does not apply to calls using the circuit-mode multiple rate bearer service.
SS-CPI allows a call request for a priority call to proceed successfully in the case that there is no user information channel available. This is accomplished by force releasing an established call of lower priority.
SS-CPIP allows for the protection of calls against interruption from priority calls.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 15991.
The signalling protocol for SS-CPI(P) operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CPI(P) and other supplementary services and ANFs.
NOTE 2 — Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.
This International Standard is applicable to PINXs that can interconnect to form a PISN.