この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
このドキュメントのバージョン
Rec. ITU-T H.274 | ISO/IEC 23002-7 バージョン 1 は、このドキュメントの最初に承認されたバージョンを指します。 ITU-T によって Rec. ITU-T H.274 (08/2020) として発行され、ISO/IEC によって ISO/IEC 23002-7:2021 として発行された初版は、最初のバージョンに対応しています。
Rec. ITU-T H.274 | ISO/IEC 23002-7 バージョン 2 (現在のバージョン) は、9 つの追加の SEI メッセージ、つまり、注釈付き領域 SEI メッセージ、アルファ チャネル情報 SEI メッセージ、深度表現情報 SEI メッセージ、マルチビュー取得情報 SEI を含む統合テキストを参照します。メッセージ、マルチビュー ビュー位置 SEI メッセージ、スケーラビリティ ディメンション情報 SEI メッセージ、拡張依存ランダム アクセス ポイント表示 SEI メッセージ、ディスプレイ方向 SEI メッセージ、および色変換情報 SEI メッセージ。これらの追加の SEI メッセージに加えて、このバージョンには、仕様の以前の内容のさまざまな小さな欠陥に対する修正も含まれています。 ISO/IEC が ISO/IEC 23002-7:202X として発行した第 2 版は、第 2 版に相当します。 ISO/IEC によるこの版の発行時に、対応する Rec. ITU-T H.274 の第 2 版が ITU-T による発行の準備中でした。
慣習
「このドキュメント」という用語は、この勧告を参照するために使用されます。国際規格。
このドキュメントでは、次の動詞形式が使用されています。
- 「しなければならない」は要件を示します。構文要素の値またはこれらの構文要素から派生した変数の値に対する必須の制約を表すために使用される場合、制約が確実に満たされるようにするのはエンコーダの責任です。
- 「すべき」は推奨事項を示します。これは、予想される通常の状況下で従うことが推奨される実装の動作を参照するために使用されますが、このドキュメントへの適合の要件ではありません。
- 「may」は許可を示します。
- 「できる」は、可能性や能力を表します。
「注」とマークされた情報は、ドキュメントの理解または使用を支援することを目的としています。第 3 条で使用される「記入事項」は、用語データを補足する追加情報を提供し、用語の使用に関する規定を含めることができます。
特許宣言
国際標準化機構 (ISO) および国際電気標準会議 (IEC) は、この文書への準拠には特許の使用が含まれる可能性があると主張しているという事実に注目しています。
ISO および IEC は、この特許権の証拠、有効性、および範囲に関していかなる立場も取りません。
この特許権の所有者は、ISO および IEC に対して、合理的かつ非差別的な条件の下で、世界中の申請者とライセンスを交渉する意思があることを保証しています。この点、本特許権者の陳述書は ISO および IEC に登録されています。情報は、 www.iso.org /patents or https://patents.iec.ch で利用可能な特許データベースから取得できます。
このドキュメントの一部の要素が、特許データベース内のもの以外の特許権の対象である可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
Introduction
Versions of this document
Rec. ITU-T H.274 | ISO/IEC 23002-7 version 1 refers to the first approved version of this document. The first edition published by ITU-T as Rec. ITU-T H.274 (08/2020) and by ISO/IEC as ISO/IEC 23002-7:2021 corresponded to the first version.
Rec. ITU-T H.274 | ISO/IEC 23002-7 version 2 (the current version) refers to the integrated text containing nine additional SEI messages, namely the annotated regions SEI message, the alpha channel information SEI message, the depth representation information SEI message, the multiview acquisition information SEI message, the multiview view position SEI message, the scalability dimension information SEI message, the extended dependent random access point indication SEI message, the display orientation SEI message, and the colour transform information SEI message. Besides these additional SEI messages, this version also contains corrections to various minor defects in the prior content of the specification. The second edition published by ISO/IEC as ISO/IEC 23002-7:202X corresponds to the second version. At the time of publication of this edition by ISO/IEC, a corresponding second edition of Rec. ITU-T H.274 was in preparation for publication by ITU-T.
Conventions
The term"this document" is used to refer to this Recommendation | International Standard.
In this document, the following verbal forms are used:
- “shall” indicates a requirement. When used to express a mandatory constraint on the values of syntax elements or the values of variables derived from these syntax elements, it is the responsibility of the encoder to ensure that the constraint is fulfilled.
- “should” indicates a recommendation. It is used to refer to behaviour of an implementation that is encouraged to be followed under anticipated ordinary circumstances, but is not a requirement for conformance to this document.
- “may” indicates a permission.
- “can” indicates a possibility or a capability.
Information marked as “NOTE” is intended to assist the understanding or use of the document. “Notes to entry” used in Clause 3 provide additional information that supplements the terminological data and can contain provisions relating to the use of a term.
Patent declarations
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that compliance with this document may involve the use of a patent.
ISO and IEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO and IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO and IEC. Information may be obtained from the patent database available at www.iso.org/patents or https://patents.iec.ch .
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those in the patent database. ISO and IEC shall not be held responsible for identifying any or all such patent rights.