この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
次の MPEG 国際規格では、元のマルチチャネル信号のダウンミックス信号と関連する空間パラメータに基づいたマルチチャネル信号のコーディングについて説明しています。マルチチャンネル信号のコーディングに可能な限り低いデータ レートを提供するほか、データ ストリームに含まれる固有のモノラルまたはステレオ ダウンミックス信号も提供します。したがって、非常にわずかなデータ オーバーヘッドを追加するだけで、モノラルまたはステレオ信号をマルチチャネルに拡張できます。さらに、国際規格では MPEG サラウンド ストリームのバイノーラル デコードについて説明しており、ヘッドフォンでのサラウンド サウンド体験が可能になります。この国際規格では、空間パラメーターを使用せずにステレオ信号からマルチチャンネル アップミックスを可能にする拡張マトリックス モードも定義されています。
国際標準化機構 (ISO) および国際電気標準会議 (IEC) は、この文書への準拠には特許の使用が含まれる可能性があると主張されているという事実に注意を促しています。
ISO および IEC は、この特許権の証拠、有効性、および範囲に関していかなる立場も取っていません。
この特許権の所有者は、ISO および IEC に対し、世界中の出願人と合理的かつ非差別的な条件に基づいてライセンス交渉を行う用意があることを保証しました。この点において、この特許権者の声明は ISO および IEC に登録されています。情報は付録 J にリストされている企業から入手できます。
この文書の要素の一部が付録 J で特定されているもの以外の特許権の対象である可能性があることに注意が必要です。ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
Introduction
The following MPEG International Standard describes the coding of multi-channel signals based on a downmixed signal of the original multi-channel signal, and associated spatial parameters. It offers lowest possible data rate for coding of multi-channel signals, as well as an inherent mono or stereo downmix signal included in the data stream. Hence, a mono or stereo signal can be expanded to multi-channel by a very small additional data overhead. Furthermore, the International Standard describes binaural decoding of the MPEG Surround stream, enabling a surround sound experience over headphones. The International Standard furthermore defines an Enhanced Matrix Mode that enables a multi-channel upmix from a stereo signal without any spatial parameters.
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that compliance with this document may involve the use of a patent.
The ISO and IEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO and IEC that he is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with the ISO and IEC. Information may be obtained from the companies listed in Annex J.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified in Annex J. ISO and IEC shall not be held responsible for identifying any or all such patent rights.