この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
ISO/IEC 24730 は、資産管理で使用するリアルタイム位置特定システム (RTL) 用の単一のアプリケーション プログラム インターフェイス (API) を定義しており、成長する RTLS 市場向けに製品の互換性を確保し、相互運用性を促進することを目的としています。 ISO/IEC 24730 は、次の 3 つのエア インターフェイス プロトコルも定義しています。 ISO/IEC 24730-2 (DSSS) に基づく ISO/IEC 24730-5, チャープ スペクトラム拡散 (CSS) 技術に基づくISO/IEC 24730-6 Ultra Wide Band Air Interface プロトコル。
ISO/IEC 24730 のこの部分、直接シーケンス拡散スペクトラム (DSSS) 2.4 GHz エア インターフェイス プロトコルは、国際的に利用可能な 2.4 GHz 周波数帯域で動作するリアルタイム位置特定システムの技術標準を確立し、おおよその位置を提供することを目的としています。頻繁な更新 (たとえば、1 分間に数回) ISO/IEC 24730 のこの部分に準拠するには、ISO/IEC 24730-1 への準拠も必要です。
リアルタイム位置特定システムは、現在または現在に近い時点で、定義された空間 (ローカル/キャンパス、広域/地域、地球規模) 内の任意の場所にあるアイテムの位置を特定する機能を備えた無線システムです。 。位置は、無線リンクの物理的特性の測定から得られます。
ISO/IEC 24730 のこの部分では、倉庫、キャンパス、空港 (対象エリアは計器化されている) などの管理エリア内の資産を 3 m 以下の精度で位置特定するシステムのエア インターフェイスを指定します。
オブジェクトの位置を特定するには、RTLS ではなく実際には RFID を使用する 2 つの追加方法があります。
- 資産がある時点で点 A を通過し、点 B を通過していないという事実に基づいて資産を特定する。
- ホーミングビーコンを提供することによって資産の位置を特定し、それによってハンドヘルドデバイスを持った人が資産を見つけることができる。
位置特定の方法は、識別と位置特定を通じて行われ、通常はマルチラテレーションを通じて行われます。さまざまなタイプは次のとおりです
- 到着時刻 (ToA)/ 飛行時間測距システム、
- 振幅/受信信号強度三角測量、
- 到着時間差 (TDoA)、および
- 到来角 (AoA)
ISO/IEC 24730 のこの部分では、RTLS システムの作成に必要なエア インターフェイス プロトコルを定義します。
使用できる位置アルゴリズムには多くの種類がありますが、位置アルゴリズムの一例は ISO/IEC 24730-21 の付録 A に記載されています。
ISO/IEC 24730 のこの部分では、複数の拡散コードで動作し、QPSK データ エンコーディングとウォルシュ オフセット QPSK (WOQPSK) 拡散スキームを採用する、準拠した RTLS 送信機の物理層も定義し、また、到着時間差 (TDOA) などのタイミング情報に基づく位置検出方法。
使用できるリーダー同期方法にはさまざまな種類がありますが、RTLS リーダー同期の例は付録 A に記載されています。
Introduction
ISO/IEC 24730 defines a single application program interface (API) for real-time locating systems (RTLs) for use in asset management and is intended to allow for compatibility and to encourage interoperability of products for the growing RTLS market. ISO/IEC 24730 also defines three air interface protocols, as follows: ISO/IEC 24730-2, based on a direct sequence spread spectrum (DSSS), ISO/IEC 24730-5, based on a chirp spread spectrum (CSS) technique, and ISO/IEC 24730-6 Ultra Wide Band Air Interface protocol.
This part of ISO/IEC 24730, the direct sequence spread spectrum (DSSS) 2,4 GHz air interface protocol, establishes a technical standard for real-time locating systems that operate at an internationally available 2,4 GHz frequency band and is intended to provide approximate location with frequent updates (for example, several times a minute). In order to be compliant with this part of ISO/IEC 24730 compliance with ISO/IEC 24730-1 is also required.
Real-time locating systems are wireless systems with the ability to locate the position of an item anywhere in a defined space (local/campus, wide area/regional, global) at a point in time that is, or is close to, present time. Position is derived by measurements of the physical properties of the radio link.
This part of ISO/IEC 24730 specifies the air interface for a system that locates an asset in a controlled area, e.g. warehouse, campus, airport (area of interest is instrumented) with accuracy to 3 m or less.
There are two additional methods of locating an object which are really RFID rather than RTLS:
- locating an asset by virtue of the fact that the asset has passed point A at a certain time and has not passed point B;
- locating an asset by virtue of providing a homing beacon whereby a person with a handheld device can find an asset.
The method of location is through identification and location, generally through multi-lateration. The different types are
- time of Arrival (ToA)/ Time of Flight Ranging Systems,
- amplitude/ Received Signal Strength Triangulation,
- time Difference of Arrival (TDoA), and
- angle of Arrival (AoA).
This part of ISO/IEC 24730 defines the air interface protocol needed for the creation of an RTLS system.
Although there are many types of location algorithms that could be used, one example of a location algorithm is provided in Annex A of ISO/IEC 24730-21.
This part of ISO/IEC 24730 also defines the physical layer for compliant RTLS transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme, and defines the air interface protocol needed for the reader synchronization essential for the location method based on timing information, such as Time Difference of Arrival (TDOA).
Although there are many types of reader synchronization methods that could be used, an example of RTLS reader synchronization is provided in Annex A.