この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
- 1) ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界的な標準化のための専門的なシステムを形成します。 ISO または IEC のメンバーである国家機関は、国際規格の開発に参加しています。それらの準備は技術委員会に委ねられています。扱われる主題に関心のある ISO および IEC 加盟団体は、この準備作業に参加することができます。 ISO および IEC と連携している国際的な政府および非政府組織も、この準備に参加しています。
- 2)情報技術の分野では、ISO と IEC は合同技術委員会 ISO/IEC JTC 1 を設立しました。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
- 3)各技術委員会は、関心のあるすべての IEC および ISO メンバー団体からの代表者を持っているため、技術的事項に関する IEC および ISO の正式な決定または合意は、関連する主題に関する国際的な意見の一致を可能な限り表現します。
- 4) IEC, ISO, および ISO/IEC の出版物は、国際的な使用のための推奨事項の形式を持ち、その意味で IEC および ISO のメンバー団体によって受け入れられています。 IEC, ISO, および ISO/IEC の出版物の技術的内容が正確であることを保証するためにあらゆる合理的な努力が払われていますが、IEC または ISO は、それらの使用方法またはエンドユーザーによる誤解に対して責任を負うことはできません。
- 5)国際的な統一性を促進するために、IEC および ISO のメンバー団体は、IEC, ISO, および ISO/IEC の出版物を可能な限り透過的に国内および地域の出版物に適用することを約束します。 ISO/IEC 刊行物と対応する国または地域の刊行物との相違点は、後者で明確に示す必要があります。
- 6) ISO および IEC は、承認を示すためのマーキング手順を提供しておらず、ISO/IEC 出版物に適合していると宣言された機器について責任を負うことはできません。
- 7)すべてのユーザーは、この出版物の最新版を持っていることを確認する必要があります。
- 8) IEC または ISO またはその取締役、従業員、使用人または代理店 (個々の専門家および技術委員会のメンバーを含む) および IEC または ISO のメンバー団体は、人身傷害、物的損害、またはその他のいかなる性質の損害についても、責任を負わないものとします。この ISO/IEC 刊行物またはその他の IEC, ISO, または ISO/IEC 刊行物の発行、使用、または依存から生じる直接的または間接的、または費用 (弁護士費用を含む) および費用。
- 9)この刊行物で引用されている規範的な参考文献に注意が必要です。この刊行物を正しく適用するには、参照されている刊行物を使用することが不可欠です。
- 10)この規格の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO/IEC 29145-3 は、ISO/IEC 合同技術委員会 1: 情報技術の小委員会 25: 情報技術機器の相互接続によって作成されました。
ISO/IEC 29145 シリーズの現在利用可能なすべての部分のリストは、一般的なタイトルの情報技術 - ワイヤレス ホーム ネットワーク サービス用のワイヤレス ビーコン対応のエネルギー効率の高いメッシュ ネットワーク (WiBEEM) の下にあり、IEC Web サイトで見つけることができます。
この国際規格は、メンバー団体の投票によって承認されており、投票結果は、2 番目のタイトル ページに記載されているアドレスから取得できます。
この出版物は、ISO/IEC 指令に従って起草されています。 2.
FOREWORD
- 1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards. Their preparation is entrusted to technical committees; any ISO and IEC member body interested in the subject dealt with may participate in this preparatory work. International governmental and non-governmental organizations liaising with ISO and IEC also participate in this preparation.
- 2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
- 3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC and ISO member bodies.
- 4) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
- 5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any ISO/IEC publication and the corresponding national or regional publication should be clearly indicated in the latter.
- 6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for any equipment declared to be in conformity with an ISO/IEC publication.
- 7) All users should ensure that they have the latest edition of this publication.
- 8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts and members of their technical committees and IEC or ISO member bodies for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or any other IEC, ISO or ISO/IEC publications.
- 9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.
- 10) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 29145-3 was prepared by subcommittee 25: Interconnection of information technology equipment, of ISO/IEC joint technical committee 1: Information technology.
The list of all currently available parts of the ISO/IEC 29145 series, under the general title Information technology — Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless home network services, can be found on the IEC web site.
This International Standard has been approved by vote of the member bodies, and the voting results may be obtained from the address given on the second title page.
This publication has been drafted in accordance with the ISO/IEC Directives, 2.