※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 つの定義
注 —この条項に含まれる定義は、条項 4 で定義された略語を使用します。
3.1この勧告 |国際標準は、CCITT Rec. X.200 と ISO 7498, および CCITT Rec. X.650 と ISO/IEC 7498-3 で開発された概念に基づいており、それらで定義されている次の用語を使用しています。
- a)連結と分離。
- b)セグメント化と再組み立て。
- c)多重化と逆多重化。
- d)分割と再結合。
- e)フロー制御。
- f)コネクションレスモード送信。
- g)トランスポートセレクター;
- h) nil セレクター値。
3.2この勧告の目的のために、次の定義が適用されます。
3.2.1
装置
ハードウェアまたはソフトウェア、またはその両方の組み合わせ。コンピュータ システム内で物理的に区別する必要はありません。
3.2.2
輸送サービス利用者
トランスポート サービスを利用する単一システム内のエンティティ全体の抽象表現。
3.2.3
ネットワーク サービス プロバイダー
トランスポート エンティティから見た、ネットワーク サービスを提供するエンティティ全体をモデル化する抽象マシン。
3.2.4
ローカル事項
このプロトコルの要件の対象とならない、トランスポート層での動作に関するシステムの決定。
3.2.5
イニシエータ
CR-TPDU を開始するトランスポート エンティティ。
3.2.6
対応者
イニシエータがトランスポート接続の確立を希望するトランスポート エンティティ。
注記1:イニシエータとレスポンダは、単一のトランスポート接続に関して定義されます。トランスポート エンティティは、同時に開始側と応答側の両方になることができます。
3.2.7
送信トランスポート エンティティ
特定の TPDU を送信するトランスポート エンティティ。
3.2.8
受信トランスポート エンティティ
特定の TPDU を受信するトランスポート エンティティ。
3.2.9
優先クラス
トランスポート接続で使用するための最初の選択肢として、イニシエータが CR-TPDU で示すプロトコル クラス。
3.2.10
代替クラス
トランスポート接続で使用するための代替選択肢として、イニシエータが CR-TPDU で示すプロトコル クラス。
3.2.11
提案されたクラス
優先クラスまたは代替クラス。
3.2.12
選択したクラス
レスポンダがトランスポート接続で使用するために選択した CC-TPDU で示すプロトコル クラス。
3.2.13
提案されたパラメータ
イニシエータがトランスポート接続で使用したい CR-TPDU で示すパラメータの値。
3.2.14
選択したパラメータ
レスポンダがトランスポート接続で使用するために選択した CC-TPDU で示すパラメータの値。
3.2.15
エラー表示
トランスポート エンティティが NS プロバイダーから受信する、エラーを示す理由コードを含む N-RESET 指示または N-DISCONNECT 指示。
3.2.16
無効な TPDU
この勧告の要件に準拠しない TPDU |構造とエンコーディングの国際標準。
3.2.17
プロトコルエラー
クラスの手順に従わない使用の TPD
3.2.18
シーケンス番号
- a) DT-TPDU がトランスポート エンティティによって送信された順序を示す、DT-TPDU の TPDU-NR フィールド内の番号。
- b)トランスポート エンティティによって受信されると予想される次の DT TPDU のシーケンス番号を示す、AK または RJ-TPDU の YR-TU-NR フィールド内の番号。
3.2.19
送信ウィンドウ
トランスポート エンティティがピア エンティティによって特定のトランスポート接続で特定の時間に送信することを許可された一連の連続したシーケンス番号。
3.2.20
ウィンドウの下端
送信ウィンドウの最小シーケンス番号。
3.2.21
窓の上端
送信ウィンドウ内の最大シーケンス番号より 1 大きいシーケンス番号。
3.2.22
ピア エンティティに割り当てられた上部ウィンドウ エッジ
トランスポート エンティティがピア エンティティに伝達する値で、ウィンドウの新しい上端として解釈されます。
3.2.23
閉じた窓
シーケンス番号を含まない送信ウィンドウ。
3.2.24
ウィンドウ情報
ウィンドウの上端と下端に関連する TPDU に含まれる情報。
3.2.25
凍結参照
6.18 の要件により、接続への割り当てに使用できない参照。
3.2.26
割り当てられていない参照
トランスポート接続の識別に現在使用されておらず、凍結状態でもない参照。
3.2.27
透明 (データ)
トランスポート エンティティ間でそのまま転送され、トランスポート エンティティが使用できない TS ユーザー データ。
3.2.28
(ネットワーク接続の) 所有者
そのネットワーク接続の作成につながる N-CONNECT 要求を発行したトランスポート エンティティ。接続モードのネットワーク サービスを使用している場合にのみ適用されます。
3.2.29
保持された TPDU
再送信手順または保持および確認手順の対象であり、可能な再送信に使用できる TPD
3.3この勧告 | International Standard では、CCITT Rec. X.213 で定義されている次の用語を使用しています。 ISO/IEC 8348:
- a)コネクションモードネットワークサービス;
- b)コネクションレス モード ネットワーク サービス。
3.4この勧告 |国際規格では、CCITT Rec. X.290 および ISO/IEC 9646-1 で定義されている次の用語を使用しています。
- a) PICS プロフォーマ;
- b)プロトコル実装適合宣言 (PICS)
3 Definitions
NOTE — The definitions contained in this clause make use of abbreviations defined in clause 4.
3.1 This Recommendation | International Standard is based on the concepts developed in CCITT Rec. X.200 and ISO 7498 and CCITT Rec. X.650 and ISO/IEC 7498-3 and makes use of the following terms defined in them:
- a) concatenation and separation;
- b) segmenting and reassembling;
- c) multiplexing and demultiplexing;
- d) splitting and recombining;
- e) flow control;
- f) connectionless-mode transmission;
- g) transport selector;
- h) nil selector value.
3.2 For the purposes of this Recommendation, the following definitions apply:
3.2.1
equipment
Hardware or software or a combination of both; it need not be physically distinct within a computer system.
3.2.2
transport service user
An abstract representation of the totality of those entities within a single system that make use of the transport service.
3.2.3
network service provider
An abstract machine that models the totality of the entities providing the network service, as viewed by a transport entity.
3.2.4
local matter
A decision made by a system concerning its behaviour in the Transport Layer that is not subject to the requirements of this protocol.
3.2.5
initiator
A transport entity that initiates a CR-TPDU.
3.2.6
responder
A transport entity with whom an initiator wishes to establish a transport connection.
Note 1 to entry: Initiator and responder are defined with respect to a single transport connection. A transport entity can be both an initiator and responder simultaneously.
3.2.7
sending transport entity
A transport entity that sends a given TPDU.
3.2.8
receiving transport entity
A transport entity that receives a given TPDU.
3.2.9
preferred class
The protocol class that the initiator indicates in a CR-TPDU as its first choice for use over the transport connection.
3.2.10
alternative class
A protocol class that the initiator indicates in a CR-TPDU as an alternative choice for use over the transport connection.
3.2.11
proposed class
A preferred class or an alternative class.
3.2.12
selected class
The protocol class that the responder indicates in a CC-TPDU that it has chosen for use over the transport connection.
3.2.13
proposed parameter
The value for a parameter that the initiator indicates in a CR-TPDU that it wishes to use over the transport connection.
3.2.14
selected parameter
The value for a parameter that the responder indicates in a CC-TPDU that it has chosen for use over the transport connection.
3.2.15
error indication
An N-RESET indication, or an N-DISCONNECT indication with a reason code indicating an error, that a transport entity receives from the NS-provider.
3.2.16
invalid TPDU
A TPDU that does not comply with the requirements of this Recommendation | International Standard for structure and encoding.
3.2.17
protocol error
A TPDU whose use does not comply with the procedures for the class.
3.2.18
sequence number
- a) the number in the TPDU-NR field of a DT-TPDU that indicates the order in which the DT-TPDU was transmitted by a transport entity;
- b) the number in the YR-TU-NR field of an AK or RJ-TPDU that indicates the sequence number of the next DT TPDU expected to be received by a transport entity.
3.2.19
transmit window
The set of consecutive sequence numbers which a transport entity has been authorized by its peer entity to send at a given time on a given transport connection.
3.2.20
lower window edge
The lowest sequence number in a transmit window.
3.2.21
upper window edge
The sequence number which is one greater that the highest sequence number in the transmit window.
3.2.22
upper window edge allocated to the peer entity
The value that a transport entity communicates to its peer entity to be interpreted as its new upper window edge.
3.2.23
closed window
A transmit window that contains no sequence number.
3.2.24
window information
Information contained in a TPDU relating to the upper and the lower window edges.
3.2.25
frozen reference
A reference that is not available for assignment to a connection because of the requirements of 6.18.
3.2.26
unassigned reference
A reference that is neither currently in use for identifying a transport connection nor which is in a frozen state.
3.2.27
transparent (data)
TS-user data that is transferred intact between transport entities and which is unavailable for use by the transport entities.
3.2.28
owner (of a network connection)
The transport entity that issued the N-CONNECT request leading to the creation of that network connection. Only applicable when operating over the connection-mode network service.
3.2.29
retained TPDU
A TPDU that is subject to the retransmission procedure or retention and acknowledgement procedure and is available for possible retransmission.
3.3 This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.213 | ISO/IEC 8348:
- a) connection-mode network service;
- b) connectionless-mode network service.
3.4 This Recommendation | International Standard uses the following terms defined in CCITT Rec. X.290 and ISO/IEC 9646-1:
- a) PICS proforma;
- b) Protocol Implementation Conformance Statement (PICS).