この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO/IEC 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令で指定された規則に従って起草されました。 2 ( www.iso.org/directives or www.iec.ch/members_experts/refdocs を参照)
IEEE 規格ドキュメントは、IEEE ソサイエティおよび IEEE 規格協会 (IEEE-SA) 規格委員会の規格調整委員会内で作成されます。 IEEE は、米国規格協会によって承認されたコンセンサス開発プロセスを通じて標準を開発します。このプロセスは、さまざまな視点と関心を代表するボランティアを集めて最終製品を完成させます。ボランティアは必ずしも研究所のメンバーではなく、無償で奉仕します。 IEEE はプロセスを管理し、コンセンサス開発プロセスの公平性を促進するためのルールを確立しますが、IEEE はその標準に含まれる情報の正確性を独自に評価、テスト、または検証しません。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序論および/または受信した特許宣言の ISO リスト ( www.iso.org/patents を参照) または受信した特許宣言の IEC リスト ( https://patents.iec.ch )
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html . IEC については、 www.iec.ch/understanding-standards を参照してください。
この文書は、Partner Standards Development Organization の協力協定に基づき、Joint Technical Committee ISO/IEC JTC 1, Information technology , Subcommittee SC 7, Software and systems engineeringが、IEEE Computer Society の Systems and Software Engineering Standards Committee と協力して作成しました。 ISOとIEEEの間。
この第 2 版は、技術的に改訂された第 1 版 (ISO/IEC 15026-2:2011) を取り消して置き換えるものです。
主な変更点は次のとおりです。
- 前版の第 2 項を削除。
- 前版の第 5 項のタイトルが変更され、この版の第 4 項になりました。
- 第 6 条の改訂内容は、本版の第 5 条に記載されています。
- 条項 7 は削除され、その改訂内容は、この版の 4.2 および 5.2 にあります。
ISO/IEC/IEEE 15026 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO/IEC documents should be noted. This document was drafted in accordance with the rules given in the ISO/IEC Directives, 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs ).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ) or the IEC list of patent declarations received (see https://patents.iec.ch ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html . In the IEC, see www.iec.ch/understanding-standards .
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 7, Software and systems engineering, in cooperation with the Systems and Software Engineering Standards Committee of the IEEE Computer Society, under the Partner Standards Development Organization cooperation agreement between ISO and IEEE.
This second edition cancels and replaces the first edition (ISO/IEC 15026-2:2011), which has been technically revised.
The main changes are as follows:
- Clause 2 of the previous edition was deleted.
- The title of Clause 5 of the previous edition was changed and became Clause 4 of this edition.
- Revised contents of Clause 6 can be found in Clause 5 of this edition.
- Clause 7 was deleted and its revised contents can be found in 4.2 and 5.2 of this edition.
A list of all parts in the ISO/IEC/IEEE 15026 series can be found on the ISO website.