この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。情報技術の分野では、ISO と IEC が合同技術委員会 ISO/IEC JTC 1 を設立しました。
IEEE 規格ドキュメントは、IEEE ソサイエティおよび IEEE 規格協会 (IEEE-SA) 規格委員会の規格調整委員会内で作成されます。 IEEE は、米国規格協会によって承認されたコンセンサス開発プロセスを通じて標準を開発します。このプロセスは、さまざまな視点と関心を代表するボランティアを集めて最終製品を完成させます。ボランティアは必ずしも研究所のメンバーではなく、無償で奉仕します。 IEEE はプロセスを管理し、コンセンサス開発プロセスの公平性を促進するためのルールを確立しますが、IEEE はその標準に含まれる情報の正確性を独自に評価、テスト、または検証しません。
ISO/IEC JTC 1 の主な任務は、国際規格を作成することです。合同技術委員会によって採択された国際規格草案は、投票のために各国の機関に回覧されます。国際規格として発行するには、投票を行う国の機関の少なくとも 75% による承認が必要です。
この標準の実装には、特許権の対象となる主題の使用が必要になる可能性があることに注意が必要です。この規格の発行により、それに関連する特許権の存在または有効性に関していかなる立場もとられません。 ISO/IEEE は、ライセンスが必要となる可能性のある必須特許または特許クレームを特定すること、特許または特許クレームの法的有効性または範囲について調査を行うこと、または、保証書または特許声明およびライセンス宣言書がある場合、またはライセンス契約は合理的または非差別的です。この規格のユーザーは、特許権の有効性とそのような権利の侵害のリスクの決定は完全にユーザー自身の責任であることを明示的に通知されます。詳細については、ISO または IEEE Standards Association から入手できます。
ISO/IEC/IEEE 21450 は、IEEE の IEEE Instrumentation and Measurement Society のセンサー技術に関する技術委員会によって作成されました (IEEE Std 1451.0™-2007 として)これは、合同技術委員会 ISO/IEC JTC 1, 情報技術、小委員会 SC 31, 自動識別およびデータ取得技術によって、ISO/IEC 各国機関による承認と並行して、で定義された「ファストトラック手順」の下で採用されました。 ISO と IEEE の間の Partner Standards Development Organization 協力協定。 IEEE は、ISO/IEC の国家機関からの参加と情報提供を受けて、このドキュメントの維持に責任を負います。
要約: この規格は、IEEE 1451 ファミリーの規格のメンバーが相互運用できる共通の基盤を提供します。これは、トランスデューサ インターフェイス モジュール (TIM) によって実行される機能と、TIM を実装するすべてのデバイスに共通の特性を定義します。 Transducer Electronic Data Sheets (TEDS) のフォーマットを指定します。これは、TIM のセットアップと制御、およびシステムで使用されるデータの読み取りと書き込みを容易にする一連のコマンドを定義します. アプリケーション プログラミング インターフェイス (API) は、TIM およびアプリケーションとの通信を容易にするために定義されています.
キーワード: アクチュエータ、アプリケーション プログラミング インターフェース、通信プロトコル、ネットワーク対応アプリケーション プロセッサ、センサー、スマート トランスデューサ、トランスデューサ電子データ シート、トランスデューサ インターフェース モジュール
IEEE 規格 ドキュメントは、IEEE ソサイエティおよび IEEE 規格協会 (IEEE-SA) 規格委員会の規格調整委員会内で作成されます。 IEEE は、米国規格協会によって承認されたコンセンサス開発プロセスを通じて標準を開発します。このプロセスは、さまざまな視点と関心を代表するボランティアを集めて最終製品を完成させます。ボランティアは必ずしも研究所のメンバーではなく、無償で奉仕します。 IEEE はプロセスを管理し、コンセンサス開発プロセスの公平性を促進するためのルールを確立しますが、IEEE はその標準に含まれる情報の正確性を独自に評価、テスト、または検証しません。
IEEE 規格の使用は完全に任意です。 IEEE は、本書またはその他の IEEE 標準の発行、使用、または信頼から直接的または間接的に発生した、特別、間接的、結果的、または補償的であるかを問わず、いかなる性質の人身傷害、物的損害またはその他の損害についても責任を負わないものとします。資料。
IEEE は、含まれる資料の正確性または内容を保証または表明するものではなく、商品性または特定の目的への適合性、または含まれる資料の使用が無料であることの黙示の保証を含む、明示的または黙示的な保証を明示的に否認します。特許侵害から。 IEEE 規格ドキュメントは 「現状のまま」提供されます。
IEEE 規格の存在は、IEEE 規格の範囲に関連する他の商品やサービスを作成、テスト、測定、購入、販売、または提供する方法が他にないことを意味するものではありません。さらに、標準が承認および発行された時点で表明された見解は、最新技術の開発および標準のユーザーから寄せられたコメントによって変更される可能性があります。すべての IEEE 規格は、改訂または再確認のために、少なくとも 5 年ごとにレビューを受けます。文書が 5 年以上前のものであり、再確認されていない場合、その内容は依然としてある程度の価値はあるものの、現在の技術水準を完全には反映していないと結論付けるのが合理的です。ユーザーは、IEEE 規格の最新版を使用しているかどうかを確認するように警告されています。
このドキュメントを発行して利用可能にするにあたり、IEEE は、いかなる個人または団体のために、またはその代理として、専門的またはその他のサービスを提案または提供するものではありません。また、IEEE は、他の人または組織が他の人に対して負っている義務を履行することを約束していません。この文書およびその他の IEEE 規格文書を利用する人は、いかなる状況においても合理的な注意を払うかどうかを判断する際に、有能な専門家の助言に頼る必要があります。
解釈: 特定のアプリケーションに関連するため、規格の一部の意味に関して疑問が生じる場合があります。解釈の必要性がIEEEに通知されると、研究所は適切な対応を準備するための行動を開始します。 IEEE 規格は関連する利益のコンセンサスを表しているため、どのような解釈も利益のバランスの取れた同意を得ていることを確認することが重要です。このため、IEEE とその協会および標準調整委員会のメンバーは、問題が以前に正式な検討を受けた場合を除いて、解釈の要求に即座に対応することはできません。講義、シンポジウム、セミナー、または教育コースで、IEEE 規格に関する情報を提示する個人は、IEEE の正式な立場、説明、または解釈ではなく、その個人の個人的な見解と見なされるべきであることを明確にしなければなりません。
IEEE 標準の改訂に関するコメントは、IEEE のメンバーシップに関係なく、関心のあるすべての団体から歓迎されます。文書の変更の提案は、適切なサポート コメントと共に、提案されたテキストの変更の形式である必要があります。基準に関するコメントおよび解釈の要求は、次の宛先に送信する必要があります。
IEEE-SA 標準化委員会事務局長
445 ホーズ レーン
ニュージャージー州ピスカタウェイ 08854
アメリカ
適切な料金が Copyright Clearance Center に支払われることを条件に、Institute of Electrical and Electronics Engineers, Inc. は、内部または個人的な使用のために個々の規格の一部をコピーすることを許可します。ライセンス料の支払いを手配するには、Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; までご連絡ください。 +1 978.750.8400. 教育教室で使用するための個々の規格の一部をコピーする許可は、著作権クリアランス センターを通じて取得することもできます。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Association.
ISO/IEC/IEEE 21450 was prepared by the Technical Committee on Sensor Technology of the IEEE Instrumentation and Measurement Society of the IEEE (as IEEE Std 1451.0™-2007). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC national bodies.
Abstract: This standard provides a common basis for members of the IEEE 1451 family of standards to be interoperable. It defines the functions that are to be performed by a transducer interface module (TIM) and the common characteristics for all devices that implement the TIM. It specifies the formats for Transducer Electronic Data Sheets (TEDS). It defines a set of commands to facilitate the setup and control of the TIM as well as reading and writing the data used by the system. Application programming interfaces (APIs) are defined to facilitate communications with the TIM and with applications.
Keywords: actuator, application programming interface, communication protocol, networkcapable application processor, sensor, smart transducer, transducer electronic data sheet, transducer interface module
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document.
The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard.
In publishing and making this document available, the IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a competent professional in determining the exercise of reasonable care in any given circumstances.
Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position, explanation, or interpretation of the IEEE.
Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.