※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 つの定義
このドキュメントでは、次の用語と定義が適用されます。この節で定義されていない用語については、 IEEE Standards Dictionary Onlineを参照してください。 8位
この規格では、IEEE Std 802® で定義されている次の用語を使用しています。
- 最終目的地
- 組織固有識別子 (OUI)
- 企業 ID (CID)
橋
IEEE Std 802.1Q に準拠したレイヤ 2 相互接続デバイス。
会社ID
CID
CID は、多くの目的で一意の識別子を保証する一般的な手段を提供します。 IEEE Std 802-2014 の条項 8 を参照してください。
複合ストリーム
複合ストリームは、FRER (Frame Replication and Elimination for Reliability) を介してリンクされた 1 つ以上のメンバー ストリームで構成されるストリームです。
下
別のサブレイヤーによって提供されるサービスを使用するサブレイヤーから、そのサービスを使用するサブレイヤーへのプロトコル スタックを介した方向。出力パケットの方向。
最終目的地
ローカル エリア ネットワーク (LAN) またはメトロポリタン エリア ネットワーク (MAN) に接続されたデバイス。LAN または MAN で伝送されるデータ トラフィックの送信元および/または宛先として機能します。 (IEEE Std 802 より)
エンドシステム
ネットワーク上で送信されるパケットの最初のソースまたは最終的な宛先である、ネットワークに接続されたシステム。
注記 1:エンド システムという用語は、IEEE 802 標準の読者がルータに関連する標準によって引き起こされる混乱を避けるために、エンド ステーションという用語を予期する場所で、このドキュメントでよく使用されます。たとえば、IETF によって定義されているルーターは、 IEEE 802 エンド ステーションですが、エンド システムではありません。この規格が特に IEEE 802 サービスの使用を指す場合、エンド ステーションという用語が使用されます。コネクションレス サービスのより一般化されたインスタンスを指す場合は、エンド システムという用語が使用されます。 9
直面している
ストリーム転送機能を含むシステムでは、「対面」プロトコル機能は、物理層の上にないポートのストリーム転送機能の下にある機能です。ストリーム転送機能を含まないシステムでは、受信側のプロトコル機能はありません。
注記 1:図 6-6 を参照。
入力
入力パケットは、たとえば内部サブレイヤー サービス (ISS) の M_UNITDATA.indication プリミティブによって、物理メディアに対する受信機能の位置に関係なく、プロトコル スタックを上に移動するものです。
内部ローカル エリア ネットワーク
LAN
1 つのシステムの内部にある 2 つのサービス アクセス ポイント (SAP) を持つコネクションレス パケット サービスのインスタンスで、1 つの SAP から別の SAP にパケットをリレーします。そのシステムの外部からは観測できません。
内部サブレイヤ サービス
ISS
IEEE Std 802.1Q-2014 の 6.6 で定義されている MAC サービスの拡張バージョン。
報道規制
マック
物理層との間のデータ転送を担当するデータ リンク サブ層。
メンバーストリーム
Frame Replication and Elimination for Reliability (FRER) を介して他のメンバー ストリームとリンクされ、複合ストリームを形成するストリーム。
非ストリーム転送関数
NSTF
一方のポートのサービス指示を他方のポートのサービス要求に中継する 2 ポート機能。
組織固有の識別子
OUI
OUI は、多くの目的で一意の識別子を保証する一般的な手段を提供します。 IEEE Std 802-2014 の条項 9 および条項 10 を参照してください。
外向き
ストリーム転送機能を含むシステムでは、「外向き」のプロトコル機能は、物理層の上にあるポートのストリーム転送機能の下にある機能です。ストリーム転送機能を含まないシステムでは、すべての TSN 機能が外側に向いています。
注記 1:図 6-6 を参照。
出力
出力パケットは、たとえば内部サブレイヤー サービス (ISS) の M_UNITDATA.request プリミティブなど、物理メディアに対する受信機能の位置に関係なく、プロトコル スタックを下って移動するパケットです。
パッケージ
ネットワーク上で伝送されるデータの単位で、少なくとも 1 つまたは複数の宛先アドレスと送信元アドレスのペア、およびペイロードで構成されます。イーサネット ローカル エリア ネットワーク (LAN) で伝送されるパケットはフレームです。
注記 1:パケットという用語は、IEEE 802 標準の読者がフレームという用語を予期する場所で、このドキュメントでよく使用されます。規格が特に IEEE 802 サービスの使用に言及している場合、フレームという用語が使用されます。標準がコネクションレス サービスのより一般化されたインスタンスを参照する場合、パケットという用語が使用されます。
サービスの質
QoS
パケット損失の確率、レイテンシ、およびレイテンシの変動に関連するパケット ストリームの全体的なパフォーマンス。
リレー方式
ルーターまたはブリッジ。
注記 1:リレー システムという用語は、このドキュメントでは、IEEE 802 標準の読者がブリッジという用語を予期する場所でよく使用されます。リレー システムは、理論的には、ルーター、ブリッジ、またはその他の種類の転送デバイスにすることができます。この規格が明確にどちらか一方を指す場合、ルーターorブリッジという用語が使用されます。コネクションレス サービスのより一般化されたインスタンスを指す場合は、リレー システムという用語が使用されます。
予約
エンド システムとリレー システムのチェーンで、1 つまたは複数のストリームに割り当てられた状態情報とリソースのコレクション。
ルーター
インターネット プロトコル (IP) パケットで動作するパケット転送デバイス。
ストリーミング
1 つのソースから 1 つまたは複数の宛先への時間依存データの一方向フロー。最高レベルでは、1 つのトーカー エンド システムから 1 つまたは複数のリスナー エンド システムへのフロー。
ストリーム転送機能
一方のポートのサービス表示を他方のポートのサービス要求に中継する 2 ポート機能。サービスにはすべての TSN サービス サブパラメータが含まれます。
サブパラメータ
Internal Sublayer Service (ISS) の connection_identifier パラメータの値にエンコードされたサービス パラメータ。
システム
エンド システムまたはリレー システム。
上
サービスを提供するサブレイヤーから、そのサービスを利用するサブレイヤーへのプロトコル スタックを介した方向。入力パケットの方向。
3 Definitions
For the purposes of this document, the following terms and definitions apply. The IEEE Standards Dictionary Online should be consulted for terms not defined in this clause. 8
This standard makes use of the following terms defined in IEEE Std 802®:
- End station
- Organizationally Unique Identifier (OUI)
- Company ID (CID)
bridge
A layer 2 interconnection device that conforms to IEEE Std 802.1Q.
Company ID
CID
CIDs allow a general means of assuring unique identifiers for a number of purposes. See Clause 8 of IEEE Std 802-2014.
Compound Stream
A Compound Stream is a Stream composed of one or more Member Streams linked together via Frame Replication and Elimination for Reliability (FRER).
down
The direction through the protocol stack from a sublayer using a service provided by another sublayer to the sublayer whose services it uses; the direction of output packets.
end station
A device attached to a local area network (LAN) or metropolitan area network (MAN), which acts as a source of and/or destination for data traffic carried on the LAN or MAN. (From IEEE Std 802)
end system
A system attached to a network that is an initial source or a final destination of packets transmitted across that network.
Note 1 to entry: The term end system is often used in this document in places where the reader of IEEE 802 standards would expect the term end station in order to avoid confusion caused by standards relating to routers. For example, a router, as defined by IETF, is an IEEE 802 end station, but not an end system. Where this standard specifically refers to the use of IEEE 802 services, the term end station is used. Where it refers to more generalized instances of connectionless services, the term end system is used. 9
in-facing
In a system that includes a Stream Transfer Function, the “in-facing” protocol functions are those functions that are below the Stream Transfer Function on the port that is not above the physical layer. On a system that does not include a Stream Transfer Function, there are no in-facing protocol functions.
Note 1 to entry: See Figure 6-6.
input
Input packets are those moving up the protocol stack, regardless of the position of receiving function relative to the physical media, for example, by the M_UNITDATA.indication primitive of the Internal Sublayer Service (ISS).
Internal local area network
LAN
An instance of a connectionless packet service with two Service Access Points (SAPs), both internal to a single system, that relays packets from one SAP to the other. It is not observable externally to that system.
Internal Sublayer Service
ISS
An augmented version of the MAC Service, defined in 6.6 of IEEE Std 802.1Q-2014.
Media Access Control
MAC
The data link sublayer that is responsible for transferring data to and from the Physical Layer.
Member Stream
A Stream that is linked with other Member Streams via Frame Replication and Elimination for Reliability (FRER) to form a Compound Stream.
Non-Stream Transfer Function
NSTF
A two-port function that relays service indications on one port to service requests on the other port.
Organizationally Unique Identifier
OUI
OUIs allow a general means of assuring unique identifiers for a number of purposes. See Clause 9 and Clause 10 of IEEE Std 802-2014.
out-facing
In a system that includes a Stream Transfer Function, the “out-facing” protocol functions are those functions that are below the Stream Transfer Function on the port that is above the physical layer. On a system that does not include a Stream Transfer Function, all TSN functions are out-facing.
Note 1 to entry: See Figure 6-6.
output
Output packets are those moving down the protocol stack, regardless of the position of receiving function relative to the physical media, for example, by the M_UNITDATA.request primitive of the Internal Sublayer Service (ISS).
packet
A unit of data carried over a network, comprising, at least, one or more pairs of destination and source addresses and a payload. A packet carried on an Ethernet local area network (LAN) is a frame.
Note 1 to entry: The term packet is often used in this document in places where the reader of IEEE 802 standards would expect the term frame. Where the standard specifically refers to the use of IEEE 802 services, the term frame is used. Where the standard refers to more generalized instances of connectionless services, the term packet is used.
Quality of Service
QoS
Overall performance of a packet Stream as it relates to packet loss probability, latency, and latency variation.
relay system
A router or a bridge.
Note 1 to entry: The term relay system is often used in this document in places where the reader of IEEE 802 standards would expect the term bridge. A relay system can, in theory, be a router, a bridge, or some other kind of forwarding device. Where this standard specifically refers to one or the other, the terms routerorbridge are used. Where it refers to more generalized instances of connectionless services, the term relay system is used.
Reservation
The collection of state information and resources allocated, in a chain of end systems and relay systems, for one or more Streams.
router
A packet forwarding device operating on Internet Protocol (IP) packets.
Stream
A unidirectional flow of time-sensitive data from one source to one or more destinations, and at the highest level, one Talker end system to one or more Listener end systems.
Stream Transfer Function
A two-port function that relays service indications on one port to service requests on the other port, where the service includes all TSN service subparameters.
subparameter
A service parameter encoded into the value of the connection_identifier parameter of the Internal Sublayer Service (ISS).
system
An end system or a relay system.
up
The direction through the protocol stack from a sublayer offering a service to the sublayer making use of that service; the direction of input packets.