この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1.1
山火事
都市部ではなく、草木が生い茂る地域での計画外の火災
注記 1:主にオーストラリア、ニュージーランド、アフリカで使用されますが、これらに限定されるわけではありません。
注記 2:詳細については、参考文献 [42] を参照。
3.1.2
直接火炎に接触する
建築システムや材料に衝突する炎
注記 1:詳細については、参考文献 [43] を参照。
3.1.3
避難
危険な地域から人々を分散または移動させ、比較的安全な場所に到着させること
注記 1:詳細については、参考文献 [44] を参照。
3.1.4
地震後の火災
地震後に発生する火災
3.1.5
火のブランド
発火源として機能し、気流に乗ってある程度の距離を運ばれる空中物体
注記 1:詳細については、参考文献 [45] を参照。
3.1.6
非公式和解
[出典: 環境統計用語集、方法論の研究、シリーズ F, No. 67, 国連、ニューヨーク、1997年] [46]
3.1.7
大きな屋外の火
都市火災、津波火災、火山火災、WUI火災、原野火災、または非公式集落火災ここで, 総焼失面積はかなり大きい
3.1.8
点火
元の火事から離れたところに飛んできた火の粉によって引き起こされる火災
3.1.9
津波による火災
津波によって引き起こされる火災、通常は洪水に含まれる要素の燃焼によって引き起こされる火災
3.1.10
都市火災
市街地で発生した火災
3.1.11
火山が発生した火災
火山の噴火による火災
3.1.12
荒野
人間の介入を受けていないか、自然状態に戻ることが許可されている土地、または森林または生態学的目的で管理されている土地
[出典:ISO/TS 19677:2019, 3.2]
3.1.13
原野火災
泥炭、森林、低木地、草地、放牧地で発生する自然起源または人為的介入による火災
注記 1:主に北米で使用されますが、それだけに限定されるわけではありません。
[出典:ISO/TS 19677:2019, 3.3, 修正 - 「泥炭」への参照を追加し、項目への注 1 を追加。]
3.1.14
原野の消防
森林、低木地、草原、放牧地における火災を伴う鎮圧活動
3.1.15
荒野と都市のインターフェース
ウィ
建造物やその他の人間開発が原野に隣接または重なっているwhere
注記 1: このような地域に拠点を置き、人間とその開発が野生の燃料と出会う、または混ざり合うコミュニティは、WUI コミュニティと呼ばれます。 [ 48]
注記 2: WUI に延焼する火災は、WUI 火災と呼ばれます。このような火災に関する鎮圧活動は WUI 消火活動と呼ばれ、都市部の消火活動で使用されるものとは異なる活動、戦術、装備が必要となる場合があります。
[出典:ISO/TS 19677:2019, 3.4, 修正済み — エントリへの注記が追加されました。]
参考文献
| 1 | CAN/ULC S101:2014, 建築構造および材料の耐火試験の標準方法。 |
| 2 | ASTM E119-20, 建築構造および材料の火災試験の標準試験方法。 |
| 3 | UL 26, 建築構造および材料の火災試験 |
| 4 | NFPA 251:2006, 建築構造および材料の耐火性試験の標準方法。 |
| 5 | ISO 834-1:1999, 耐火性試験 — 建築構造の要素 — Part 1: 一般要件 |
| 6 | カリフォルニア州は、規格コード 2016 の第 12-7A 章「屋外の山火事にさらされる材料と建設方法」を参照しました。外壁のサイディングと野地板。 SFM 標準 12-7A-1 [オンライン以下から入手可能です: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 7 | ASTM E2707-15, 直接火炎衝突暴露を使用して外壁アセンブリの火災浸透を測定するための標準試験方法 |
| 8 | AS 1530.8.2:2018, 建築材料、コンポーネントおよび構造に関する火災試験の方法、 Part 8.2: 模擬山火事攻撃にさらされる建物の建設要素に関する試験 - 大規模な火源。 |
| 9 | AS 1530.8.1:2018, 建築材料、コンポーネントおよび構造の耐火試験方法、 Part 8.1: 模擬山火事攻撃にさらされる建物の構造要素の試験 - 輻射熱および小さな火炎源。 |
| 10 | CAN/ULC-S107:2019, 屋根材の防火試験の標準方法 |
| 11 | UL 79, 屋根材の防火試験の標準試験方法に関する規格。 |
| 12 | NFPA 276:2019, 可燃性の甲板上屋根コンポーネントを備えた屋根アセンブリの熱発生率を決定するための耐火試験の標準方法 – 米国 |
| 13 | ASTM E2886/E2886M-20, 残り火の侵入および直接火炎衝突に耐える外部通気孔の能力を評価するための標準試験方法。 |
| 14 | カリフォルニア州は、規格コード 2016 の第 12-7A 章「屋外の山火事にさらされる材料と建設方法」を参照しました。デッキ。 SFM 規格 12-7A-4 [オンライン以下から入手可能です: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 15 | ASTM E2632/E2632M-20, デッキ材のデッキ下火災試験応答を評価するための標準試験方法。 |
| 16 | ASTM E2726/E2726M-12a, (2017)、燃焼火災に対するデッキ構造の火災試験応答を評価するための標準試験方法。 |
| 17 | ASTM E108-20a, 屋根材の防火試験の標準試験方法。 |
| 18 | カリフォルニア州は、規格コード 2016 の第 12-7A 章「屋外の山火事にさらされる材料と建設方法」を参照しました。水平投影下面。 SFM 規格 12-7A-3 [オンライン以下から入手可能です: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 19 | ASTM E2957-17, 軒、軒裏、その他の突出部の山火事の侵入に対する耐性の標準試験方法 |
| 20 | カリフォルニア州は、規格コード 2016 の第 12-7A 章「屋外の山火事にさらされる材料と建設方法」を参照しました。外側の窓。 SFM 規格 12-7A- https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 21 | カリフォルニア州は、規格コード 2016 の第 12-7A 章「屋外の山火事にさらされる材料と建設方法」を参照しました。発火しにくい素材です。 SFM 規格 12-7A-5 [オンライン以下から入手可能です: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 22 | CAN/ULC-S114:2018, 建築材料の不燃性を判定するための標準試験方法 |
| 23 | CAN/ULC-S135-92, 酸素消費熱量計(コーン熱量計)を使用した建築材料の可燃性の程度の測定のための標準試験方法 |
| 24 | CAN/ULC-S134:2013 Rev1.、外壁アセンブリの耐火試験の標準方法 |
| 25 | 日本建築センター『建築基準法』(CD-ROM)、 2016年5月 |
| 26 | JIS A 1310:2019, 建物ファサード上の火災伝播試験方法 – 日本 |
| 27 | S. スズキ、他、連続ファイアブランド攻撃にさらされた木材およびタイル屋根アセンブリのパフォーマンス、火災と材料、41: 84-96, 201 |
| 28 | S. L. Manzello ら、 「Firebrand Showers に対する構造の脆弱性の実験的調査」 、Fire Safety Journal 、46: 568-578, 2011 年。 |
| 29 | SL Manzello および S. スズキ、ウッドデッキアセンブリを風による継続的なファイアブランドシャワーにさらす、火災安全科学11: 1339-1352, 2014 年。 |
| 30 | SL Manzello および S. スズキ、 Firebrand Showers にさらされたウッドデッキアセンブリの実験的調査、Fire Safety Journal 、92: 122-131, 201 |
| 31 | S.L. マンゼロおよび S. スズキ、ウッドデッキアセンブリの点火の軽減に対するボード間隔の影響、火災安全ジャーナル、110: 102913, 201 |
| 32 | S.スズキとSLマンゼロ。 「燃料床の点火における放射熱流束とファイアブランドシャワーの結合効果の調査」、Fire Technology 、 57 :683, 202 |
| 33 | 吉岡宏、樋本和人、鍵谷和也、「日本の大都市火災: 歴史と管理」、 Fire Technology 56: 1885–1901, 202 |
| 34 | CEN/TS 1187:2012, 屋根への外部火災暴露の試験方法 |
| 35 | EN 13501-5:2016, 建設製品および建築要素の火災分類 - Part 5: 屋根への外部火災暴露試験のデータを使用した分類 |
| 36 | (フランス) 1970 年 9 月 10 日の国家令。 Arrêté du 10 September 10 September1970は、屋外での火災に対する危険性を伴うクーベルチュール可燃性物質の分類に関連しています。以下から入手可能: https://www.legifrance.gouv.fr/loda/id/LEGITEXT000006074198/2003-03-13/?isSuggest=true |
| 37 | EN 1363-2:1999, 耐火性試験 - Part 2: 代替手順および追加手順 |
| 38 | EN 1363-1:2020, 耐火性試験 - Part 1: 一般要件 |
| 39 | EN 13501-1:2018, 建設製品および建築要素の火災分類 - Part 1: 火災試験に対する反応データを使用した分類 |
| 40 | (フランス) 2002 年 11 月 21 日の国家令。 2002 年 11 月 21 日、建設製品と損害賠償品の火災に対する反応に関する記事[オンライン以下から入手可能: https://www.legifrance.gouv.fr/loda/id/JORFTEXT000000234156?init=true&page=1&query=r%C3%A9action+au+feu+21+novembre+2002&searchField=ALL&tab_selection=all |
| 41 | G. Baker, A. Webb, および P. Whiting, オーストラリアの森林火災危険地域における建物の規制管理、Fire Technology 56: 1903-1935, 202 |
| 42 | O.プライス、山火事。出典: Manzello, SL (編) 山火事と野生地と都市の境界面 (WUI) 火災の百科事典。スプリンガー、チャム。 https://doi.org/10.1007/978-3-319-51727-8_151-1 |
| 43 | E. 牧師、直接火炎接触。出典: Manzello, SL (編) 山火事と野生地と都市の境界面 (WUI) 火災の百科事典。スプリンガー、チャム。 https://doi.org/10.1007/978-3-319-51727-8_64-1 |
| 44 | E. Ronchi, E.、S. Gwynne, S.、山火事における計算による避難モデリング。出典: Manzello, SL (編) 山火事と野生地と都市の境界面 (WUI) 火災の百科事典。スプリンガー、チャム。 https://doi.org/10.1007/978-3-319-51727-8_121-1 |
| 45 | V. Babrauskas, V.、Firebrands, Ember出典: Manzello, SL (編) 山火事と野生地と都市の境界面 (WUI) 火災の百科事典。スプリンガー、チャム。 https://doi.org/10.1007/978-3-319-51727-8_3-1 |
| 46 | 国連、環境統計用語集、方法論の研究、シリーズ F, No. 67 、国連、ニューヨーク、1997 |
| 47 | ナッシュ。森林火災多発地域における鉄骨構造の基準2014 [オンライン以下から入手可能: https://www.nash.asn.au/shop/product/nash-standard-for-steel-framed-construction-in-bushfire-areas-2014-ns300/ |
| 48 | 連邦官報、山火事の危険性が高い連邦土地周辺の都市野生地インターフェイスコミュニティ、 2001 [オンライン以下から入手可能: https://www.federalregister.gov/documents/2001/01/04/01-52/urban-wildland-interface-communities-within-the-vicinity-of-federal-lands-that-are-at-high-risk-from |
| 49 | ASTM E84, 建築材料の表面燃焼特性の標準試験方法 |
| 50 | IC国際ワイルドランド アーバン インターフェイス コード、[オンライン以下から入手可能: https://codes.iccsafe.org/content/IWUIC2021P1 |
| 51 | NFPA 1141, 未開地、田園地帯、および郊外地域の土地開発のための防火インフラの基準 |
| 52 | NFPA 1143, 原野火災管理の規格 |
| 53 | NFPA 1144, 森林火災による構造物の発火危険を軽減するための規格 |
| 54 | NFPA 1140, 原野防火規格 |
| 55 | ユーロコード EN-1991-1-2, 構造物に対する措置 - Part 1-2: 一般的な措置 - 火災にさらされた構造物に対する措置 |
| 56 | AS 3959, 森林火災が発生しやすい地域での建物の建設 |
| 57 | 2011 年 3 月 9 日の欧州議会および理事会の規則 (EU) No 305/2011 は、EEA 関連の理事会指令 89/106/EEC テキストを繰り返し、建築製品のマーケティングに関する調和のとれた条件を定めています。 |
| 58 | オーストラリア国家建設基準、第 1, 2, 3 巻、 2019 年 [オンライン以下から入手可能: https://ncc.abcb.gov.au |
| 59 | ISO/TS 19677:2019, 環境暴露による原野火災の環境および人々への悪影響を評価するためのガイドライン |
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1.1
bushfire
unplanned fire in a vegetated area, as opposed to an urban area
Note 1 to entry: Used primarily, but not exclusively, in Australia, New Zealand and Africa.
Note 2 to entry: For further information, see Reference [42].
3.1.2
direct flame contact
flame impinging on building systems and materials
Note 1 to entry: For further information, see Reference [43].
3.1.3
evacuation
dispersal or removal of people from dangerous areas and their arrival at a place of relative safety
Note 1 to entry: For further information, see Reference [44].
3.1.4
post-earthquake fire
fire which occurs after an earthquake
3.1.5
firebrand
airborne object capable of acting as an ignition source and carried for some distance in an airstream
Note 1 to entry: For further information, see Reference [45].
3.1.6
informal settlement
[SOURCE: Glossary of Environment Statistics, Studies in Methods, Series F, No. 67, United Nations, New York, 1997] [46]
3.1.7
large outdoor fire
urban fire, tsunami-generated fire, volcano-generated fire, WUI fire, wildland fire, or informal settlement fire ここで, the total burnout area is significant
3.1.8
spot fire
fire caused by flying firebrands at a distance from the original fire
3.1.9
tsunami-generated fire
fire caused by tsunami, typically by burning elements contained in the flood waters
3.1.10
urban fire
fire which occurs in an urbanized area
3.1.11
volcano-generated fire
fire caused by volcanic eruption
3.1.12
wildland
land that either has never suffered human intervention or has been allowed to return to its natural state, or that is managed for forestry or ecological purposes
[SOURCE:ISO/TS 19677:2019, 3.2]
3.1.13
wildland fire
fire occurring in peat, forests, scrublands, grasslands or rangelands, either of natural origin or caused by human intervention
Note 1 to entry: Used primarily, but not exclusively, in North America.
[SOURCE:ISO/TS 19677:2019, 3.3, modified — reference to"peat" added and Note 1 to entry added.]
3.1.14
wildland firefighting
suppressive action involving a fire in forests, scrublands, grasslands or rangelands
3.1.15
wildland-urban interface
WUI
area where structures and other human development adjoin or overlap with wildland
Note 1 to entry: A community based in such an area, in which humans and their development meet or intermix with wildland fuel, is referred to as a WUI community.[48]
Note 2 to entry: A fire that spreads to a WUI is referred to as a WUI fire. Suppressive action in relation to such a fire is referred to as WUI firefighting, and can involve different actions, tactics and equipment compared to those used in urban firefighting.
[SOURCE:ISO/TS 19677:2019, 3.4, modified — Notes to entry have been added.]
Bibliography
| 1 | CAN/ULC S101:2014, Standard methods of fire endurance tests of building construction and materials. |
| 2 | ASTM E119-20, Standard Test Methods for Fire Tests of Building Construction and Materials. |
| 3 | UL 263 (2011), Fire Tests of Building Construction and Materials |
| 4 | NFPA 251:2006, Standard Methods of Tests of Fire Resistance of Building Construction and Materials. |
| 5 | ISO 834-1:1999, Fire-resistance tests — Elements of building construction — Part 1: General requirements |
| 6 | California referenced Standards Code 2016. Chapter 12-7A Materials and Construction Methods for Exterior Wildfire Exposure. Exterior wall siding and Sheathing. SFM Standard 12-7A-1 [online]. Available from: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 7 | ASTM E2707-15, Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| 8 | AS 1530.8.2:2018, Methods for fire tests on building materials, components and structures, Part 8.2: Tests on elements of construction for buildings exposed to simulated bushfire attack - Large flaming sources. |
| 9 | AS 1530.8.1:2018, Methods for fire tests on building materials, components and structures, Part 8.1: Tests on elements of construction for buildings exposed to simulated bushfire attack - Radiant heat and small flaming sources. |
| 10 | CAN/ULC-S107:2019, Standard methods of fire tests of roof coverings |
| 11 | UL 790 (2004), Standard for Standard Test Methods for Fire Tests of Roof Coverings. |
| 12 | NFPA 276:2019, Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components– USA |
| 13 | ASTM E2886/E2886M-20, Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement. |
| 14 | California referenced Standards Code 2016. Chapter 12-7A Materials and Construction Methods for Exterior Wildfire Exposure. Decking. SFM Standard 12-7A-4 [online]. Available from: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 15 | ASTM E2632/E2632M-20, Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials. |
| 16 | ASTM E2726/E2726M-12a(2017), Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands. |
| 17 | ASTM E108-20a, Standard Test Methods for Fire Tests of Roof Coverings. |
| 18 | California referenced Standards Code 2016. Chapter 12-7A Materials and Construction Methods for Exterior Wildfire Exposure. Horizontal Projection Underside. SFM Standard 12-7A-3 [online]. Available from: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 19 | ASTM E2957-17, Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| 20 | California referenced Standards Code 2016. Chapter 12-7A Materials and Construction Methods for Exterior Wildfire Exposure. Exterior windows. SFM Standard 12-7A-2. https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 21 | California referenced Standards Code 2016. Chapter 12-7A Materials and Construction Methods for Exterior Wildfire Exposure. Ignition-Resistant material. SFM Standard 12-7A-5 [online]. Available from: https://up.codes/viewer/california/ca-referenced-standards-code-2016/chapter/12-7A/materials-and-construction-methods-for-exterior-wildfire-exposure#12-7A |
| 22 | CAN/ULC-S114:2018, Standard method of test for determination of non-combustibility in building materials |
| 23 | CAN/ULC-S135-92, Standard Method of Test for Determination of Degrees of Combustibility of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter) |
| 24 | CAN/ULC-S134:2013 Rev1., Standard Method of Fire Test of Exterior Wall Assemblies |
| 25 | The Building Center of Japan, The Building Standard Law of Japan (CD-ROM), May 2016 |
| 26 | JIS A 1310:2019, Test method for fire propagation over building façades – Japan |
| 27 | S. Suzuki, et al., The Performance of Wood and Tile Roofing Assemblies Exposed to Continuous Firebrand Assault,Fire and Materials, 41: 84-96, 2017. |
| 28 | S.L Manzello, et al., Experimental Investigation of Structure Vulnerabilities to Firebrand Showers,Fire Safety Journal, 46: 568-578, 2011. |
| 29 | S.L. Manzello and S. Suzuki, Exposing Wood Decking Assemblies to Continuous Wind-Driven Firebrand Showers, FireSafety Science 11: 1339-1352, 2014. |
| 30 | S.L. Manzello and S. Suzuki, Experimental Investigation of Wood Decking Assemblies Exposed to Firebrand Showers,Fire Safety Journal, 92: 122-131, 2017. |
| 31 | S.L Manzello and S. Suzuki, Influence of Board Spacing on Mitigating Wood Decking Assembly Ignition,Fire Safety Journal, 110: 102913, 2019. |
| 32 | S. Suzuki and S.L Manzello. Investigating Coupled Effect of Radiative Heat Flux and Firebrand Showers on Ignition of Fuel Beds,Fire Technology, 57 :683, 2021. |
| 33 | H. Yoshioka, K. Himoto, and K. Kagiya, “Large Urban Fires in Japan: History and Management”, Fire Technology 56: 1885–1901, 2020. |
| 34 | CEN/TS 1187:2012, Test methods for external fire exposure to roofs |
| 35 | EN 13501-5:2016, Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| 36 | (France) National decree of 10-09-1970. Arrêté du 10 septembre1970relatif à la classification des couvertures matériaux combustibles par rapport au danger d'incendie résultant d'un feu extérieur [online]. Available from: https://www.legifrance.gouv.fr/loda/id/LEGITEXT000006074198/2003-03-13/?isSuggest=true |
| 37 | EN 1363-2:1999, Fire resistance tests - Part 2: Alternative and additional procedures |
| 38 | EN 1363-1:2020, Fire resistance tests - Part 1: General requirements |
| 39 | EN 13501-1:2018, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests |
| 40 | (France) National decree of 21-11-2002. Arrêté du 21 novembre2002relatif à la réaction au feu des produits de construction et d'aménagement [online]. Available from: https://www.legifrance.gouv.fr/loda/id/JORFTEXT000000234156?init=true&page=1&query=r%C3%A9action+au+feu+21+novembre+2002&searchField=ALL&tab_selection=all |
| 41 | G. Baker, A. Webb, and P. Whiting, Regulatory Controls for Buildings in Wildland-Fire Prone Areas of Australia,Fire Technology 56: 1903-1935, 2020. |
| 42 | O. Price., Bushfires. In: Manzello, S.L. (eds) Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires. Springer, Cham. https://doi.org/10.1007/978-3-319-51727-8_151-1 |
| 43 | E. Pastor., Direct Flame Contact. In: Manzello, S.L. (eds) Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires. Springer, Cham. https://doi.org/10.1007/978-3-319-51727-8_64-1 |
| 44 | E. Ronchi, E., S. Gwynne, S., Computational Evacuation Modeling in Wildfires. In: Manzello, S.L. (eds) Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires. Springer, Cham. https://doi.org/10.1007/978-3-319-51727-8_121-1 |
| 45 | V. Babrauskas, V., Firebrands and Embers. In: Manzello, S.L. (eds) Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires. Springer, Cham. https://doi.org/10.1007/978-3-319-51727-8_3-1 |
| 46 | United Nations, Glossary of Environment Statistics, Studies in Methods, Series F, No. 67, United Nations, New York, 1997 |
| 47 | NASH. Standard for steel framed construction in Bushfire Prone areas2014 [online]. Available from: https://www.nash.asn.au/shop/product/nash-standard-for-steel-framed-construction-in-bushfire-areas-2014-ns300/ |
| 48 | Federal Register, Urban Wildland Interface Communities Within the Vicinity of Federal Lands That Are at High Risk From Wildfire, 2001 [online]. Availabel from: https://www.federalregister.gov/documents/2001/01/04/01-52/urban-wildland-interface-communities-within-the-vicinity-of-federal-lands-that-are-at-high-risk-from |
| 49 | ASTM E84, Standard Test Methods for Surface Burning Characteristics of Building Materials |
| 50 | ICC. International Wildland Urban Interface Code, [online]. Available from: https://codes.iccsafe.org/content/IWUIC2021P1 |
| 51 | NFPA 1141, Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas |
| 52 | NFPA 1143, Standard for Wildland Fire Management |
| 53 | NFPA 1144, Standard for Reducing Structure Ignition Hazards from Wildland Fire |
| 54 | NFPA 1140, Standard for Wildland Fire Protection |
| 55 | Eurocode EN-1991-1-2, Action on structures - Part 1-2: General actions - Actions on structures exposed to fire |
| 56 | AS 3959, Construction of buildings in bushfire-prone areas |
| 57 | Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonized conditions for the marketing of construction products repealing Council Directive 89/106/EEC Text with EEA relevance |
| 58 | National Construction Code of Australia volumes 1, 2 & 3, 2019 [online]. Available from: https://ncc.abcb.gov.au |
| 59 | ISO/TS 19677:2019, Guidelines for assessing the adverse impact of wildland fires on the environment and to people through environmental exposure |