この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書では、定義されたエアロゾル化手順後に放出されるエアロゾルを測定することにより、取り扱いから高エネルギー分散に至るまでの処理の結果として粉末から放出されるナノオブジェクトを定量化する方法について説明します。エアロゾルの粒子数濃度とサイズ分布を測定し、質量濃度を導き出します。この文書は、粉末のサンプリングおよび処理手順に利用可能な方法の中から選択する際に考慮すべき要素に関する情報を提供し、試験サンプルの調製、試験プロトコルの開発、粒子放出の測定およびデータの報告に関する最小要件を指定します。生成される粒子の全サイズ範囲を特徴付けるために、この文書ではナノ物体だけでなく凝集体や凝集体の測定についても取り上げます。
この文書には、粉末内の粒子サイズの特性評価は含まれていません。材料を研削または研磨するために直接機械的摩擦where 適用されるトライボロジー的方法は除外されます。
1 Scope
This document describes methods for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a defined aerosolization procedure. Particle number concentration and size distribution of the aerosol are measured and the mass concentration is derived. This document provides information on factors to be considered when selecting among the available methods for powder sampling and treatment procedures and specifies minimum requirements for test sample preparation, test protocol development, measuring particle release and reporting data. In order to characterize the full size range of particles generated, the measurement of nano-objects as well as agglomerates and aggregates is adressed in this document.
This document does not include the characterization of particle sizes within the powder. Tribological methods are excluded where direct mechanical friction is applied to grind or abrade the material.