※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1832, 切削工具用刃先交換式インサート — 名称
- ISO/TS 13399-2, 切削工具データの表現と交換 - Part 2: 切削項目の参照辞書
- ISO/TS 13399-80 1 、切削工具データの表現と交換 - Part 80: ISO 13399 に基づく特性に基づく 3D モデルの設計の概念: 概要と原則
参考文献
| 1 | ISO 883, 角が丸い刃先交換式超硬合金 (超硬) インサート、固定穴なし — 寸法 |
| 2 | ISO 3364, 円筒形固定穴付き、刃先交換式超硬合金 (超硬) インサート、角が丸い、寸法 |
| 3 | ISO 3365, ワイパーエッジ付き刃先交換式超硬合金 (超硬) インサート、固定穴なし — 寸法 |
| 4 | ISO 6987, 部分的に円筒形の固定穴を備えた、丸みを帯びたコーナーを備えた刃先交換式硬質材料インサート — 寸法 |
| 5 | ISO 9361-1, 切削工具用刃先交換式インサート — 角が丸いセラミックインサート — Part 1: 固定穴なしのインサートの寸法 |
| 6 | ISO 9361-2, 切削工具用刃先交換式インサート — 角が丸いセラミックインサート — Part 2: 円筒形固定穴付きインサートの寸法 |
| 7 | ISO 10910, ブレーカ付き刃先交換式チップのおおよその切りくず処理ゾーンの分類と指定 |
| 8 | ISO 13399-1, 切削工具データの表現と交換 — Part 1: 概要、基本原則、および一般情報モデル |
| 9 | ISO 16462, 立方晶窒化ホウ素インサート、チップ付きまたはソリッド — 寸法、タイプ |
| 10 | ISO 16463, 多結晶ダイヤモンドインサート、チップ付き — 寸法、タイプ |
| 11 | ISO/TS 13399-3, 切削工具データの表現と交換 - Part 3: 工具項目の参照辞書 |
| 12 | ISO/TS 13399-4, 切削工具データの表現と交換 - Part 4: 適応項目の参照辞書 |
| 13 | ISO/TS 13399-5, 切削工具データの表現と交換 - Part 5: アセンブリ項目の参照辞書 |
| 14 | ISO/TS 13399-50, 切削工具データの表現と交換 - Part 50: 参照システムおよび共通概念の参照辞書 |
| 15 | ISO/TS 13399-60, 切削工具データの表現と交換 - Part 60: 接続システムの参照辞書 |
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1832, Indexable inserts for cutting tools — Designation
- ISO/TS 13399-2, Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
- ISO/TS 13399-80 1 , Cutting tool data representation and exchange — Part 80: Concept for the design of 3D models based on properties according to ISO 13399: Overview and principles
Bibliography
| 1 | ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
| 2 | ISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
| 3 | ISO 3365, Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
| 4 | ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions |
| 5 | ISO 9361-1, Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole |
| 6 | ISO 9361-2, Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole |
| 7 | ISO 10910, Classification and designation of approximate chip control zones for indexable inserts with chipbreakers |
| 8 | ISO 13399-1, Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model |
| 9 | ISO 16462, Cubic boron nitride inserts, tipped or solid — Dimensions, types |
| 10 | ISO 16463, Polycristalline diamond inserts, tipped — Dimensions, types |
| 11 | ISO/TS 13399-3, Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items |
| 12 | ISO/TS 13399-4, Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items |
| 13 | ISO/TS 13399-5, Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items |
| 14 | ISO/TS 13399-50, Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts |
| 15 | ISO/TS 13399-60, Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems |