※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負うべきではありません。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、ISO/TC 22道路車両技術委員会、SC 35照明および可視性小委員会によって作成されました。
1 スコープ
この文書は、道路車両の屋外照明装置の防曇コーティングの試験方法と要件を指定します。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2409, 塗料およびワニス — クロスカットテスト
- ISO 4892-2, プラスチック — 実験室光源への曝露方法 — Part 2: キセノンアークランプ
- ISO 13076, 塗料およびワニス — コーティングの視覚評価のための照明と手順
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
防曇コーティング
ガラス、ポリカーボネート、ポリメチルメタクリレート、またはその他の材料で作られたアウターレンズの内面の目に見える曇りをすべて防止または隠すことができるコーティング
3.2
屋外照明装置
車両の外側に設置され、照明または信号機能として機能する照明装置
参考文献
| 1 | ISO 2808, 塗料およびワニス - 膜厚の決定 |
| 2 | ISO 2810, 塗料およびワニス — コーティングの自然風化 — 暴露と評価 |
| 3 | ISO 6270-2, 塗料およびワニス — 耐湿性の測定 — Part 2: 結露 (温水タンクを備えたキャビネット内暴露) |
| 4 | ISO 13468-1, プラスチック — 透明材料の全光線透過率の測定 — Part 1: シングルビーム装置 |
| 5 | ISO 13468-2, プラスチック — 透明材料の全光線透過率の測定 — Part 2: ダブルビーム装置 |
| 6 | ISO 14782, プラスチック - 透明材料のヘイズの測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO should not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 22 Road Vehicles, Subcommittee SC 35 Lighting and Visibility.
1 Scope
This document specifies test methods and requirements for anti-fog coating of the exterior lighting devices of road vehicles.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2409, Paints and varnishes — Cross-cut test
- ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
- ISO 13076, Paints and varnishes — Lighting and procedure for visual assessments of coatings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
anti-fog coating
coating which is able to prevent or disguise all visible fogging on the inner surface of an outer lens made of glass, polycarbonate, polymethyl methacrylate or other materials
3.2
exterior lighting device
lighting device which is installed outside of a vehicle working as an illuminating or signalling function
Bibliography
| 1 | ISO 2808, Paints and varnishes — Determination of film thickness |
| 2 | ISO 2810, Paints and varnishes — Natural weathering of coatings — Exposure and assessment |
| 3 | ISO 6270-2, Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir) |
| 4 | ISO 13468-1, Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument |
| 5 | ISO 13468-2, Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument |
| 6 | ISO 14782, Plastics — Determination of haze for transparent materials |