IEC 80416-1:2008 機器で使用するグラフィックシンボルの基本原則 — Part 1: 登録用のグラフィックシンボルの作成 | ページ 5

3.1

basic line width

line width used to draw the most significant part of a symbol original; 2 mm or 4 mm

3.2

description

normative text which defines the purpose, the application and the use of the graphical symbol, and optional product area

3.3

equipment

associated assemblies intended to achieve a defined final objective

3.4

graphical symbol

visually perceptible figure with a particular meaning used to transmit information independently of language

3.5

graphical symbol element

part of a graphical symbol which is used with a particular meaning in more than one graphical symbol

Note 1 to entry: Letters, numerals, punctuation marks and mathematical symbols may be used as graphical symbol elements (see ISO 31 and IEC 60027).

Note 2 to entry: A graphical symbol element with a specific meaning may be used to provide a common concept in the construction of a symbol family.

3.6

graphical symbol for registration

draft symbol original including the basic pattern, title, description and optional notes

3.7

nominal size

50 mm; the lateral dimension of the basic square 2 as shown in the basic pattern

3.8

symbol original

drawing of a graphical symbol, including the corner markings, prepared in accordance with IEC 80416-1 and ここで, appropriate, ISO 80416-2, and registered in IEC 60417 or ISO 7000

3.9

title

unique name by which a graphical symbol is identified and spoken of

Note 1 to entry: The title should be as short as possible; it is only intended to provide a unique name for the graphical symbol and ここで, appropriate, another name(s), but not to describe its application.