この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
火災は、考えられるさまざまな発火源によって引き起こされます。火災の統計分析により、特に建物内の火災について、主要な一次および二次発生源が特定されました。最も頻繁に発生する火災の原因は次のとおりです。
- a)調理器具
- b)暖房器具;
- c)電気配線、コネクタおよび終端;
- d)その他の電化製品 (洗濯機、ベッドウォーマー、テレビ、給湯器など)
- e)たばこ
- f)マッチと喫煙者用ガスライター。
- g)ブローランプ、ブロートーチ、溶接トーチ。
- h)ごみの焼却他の
- i)ろうそく。
このリストは、偶発的な火災の主要な主な発火源をカバーしています。悪意を持って発生した火災には、他のソースが関与している可能性があります。火災の原因に関する調査によると、一次発火源 (火のついたタバコや火のついたマッチなど) が古紙に火をつけ、それがより強力な二次発火源として機能することが示されています。
プラスチック材料を含むアプリケーションのさまざまな発火源を分析および評価する場合、詳細な火災統計に基づいて次の質問に答えることが重要です。
- 1)さまざまな火災リスク状況における個々の発火源の重要性は何ですか?
- 2)二次発火源に起因する割合は?
- 3)二次発火源に対して特に注意を払う必要があるのはどこですか?
- 4)致命的な火災事故の原因となる着火源の違いはどの程度ですか?
このドキュメントで説明されている実験室の発火源は、プラスチックが関与する実際の火災の原因であることが示されている実際の発火源をシミュレートすることを目的としています。実験室の発火源は、一貫性があるため、実際の着火源よりも好まれます。これにより、実験室内でのデータの再現性が向上し、実験室間の再現性が向上します。
これらの実験着火源は、新しい試験手順の開発に使用できます。
Introduction
Fires are caused by a wide range of possible ignition sources. Statistical analysis of fires has identified the major primary and secondary sources, especially for fires in buildings. The most frequent sources of fires have been found to be as follows:
- a) cooking appliances;
- b) space-heating appliances;
- c) electric wiring, connectors and terminations;
- d) other electrical appliances (such as washing machines, bedwarmers, televisions, water heaters);
- e) cigarettes;
- f) matches and smokers' gas lighters;
- g) blow-lamps, blow-torches and welding torches;
- h) rubbish burning; and
- i) candles.
This list covers the major primary ignition sources for accidental fires. Other sources can be involved in fires raised maliciously. Research into causes of fires has shown that primary ignition sources (e.g. glowing cigarettes or dropped flaming matches) can set fire to waste paper, which then acts as a secondary ignition source of greater intensity.
When analysing and evaluating the various ignition sources for applications involving plastics materials, it is important to answer the following questions on the basis of detailed fire statistics.
- 1) What is the significance of the individual ignition sources in various fire risk situations?
- 2) What proportion is attributable to secondary ignition sources?
- 3) Where does particular attention have to be paid to secondary ignition sources?
- 4) To what extent are different ignition sources responsible for fatal fire accidents?
The laboratory ignition sources described in this document are intended to simulate actual ignition sources that have been shown to be the cause of real fires involving plastics. Laboratory ignition sources are preferred over actual ignition sources due to their consistency, which results in greater data repeatability within a laboratory and greater reproducibility between laboratories.
These laboratory ignition sources can be used to develop new test procedures.