この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、送配電網に運ばれる天然ガスおよび天然ガス代替物のサンプルが、それらが割り当てられる質量を代表していることを保証する手段を提供します。
注特定のガスが規格で考慮されていることを確認するには、附属書 A を参照してください。
この文書は、互換性基準、エネルギー含有量、およびネットワーク エントリ条件が測定および監視されるサイトおよび場所でのサンプリングに適用され、特に国境を越えた測定ステーションおよび会計測定ステーションに関連しています。これは、天然ガス処理および微量成分の測定における制御アプリケーションの重要なソースとして機能します。
このドキュメントは、天然乾燥ガス (単相 - 通常、天然ガス パイプラインを通過するガス) のサンプリングのみに適用されます。場合によっては、天然ガスの流れに液体炭化水素が混入することがあります。湿った天然ガスの流れをサンプリングしようとすると、結果として得られる流れの組成分析に特定されていない余分な不確実性が生じる可能性があります。ウェット ガス (2 相または 3 相) フローのサンプリングは、このドキュメントの範囲外です。
このドキュメントは、ガスサンプリングに関連する安全上の問題には適用されません。
1 Scope
This document gives means for ensuring that samples of natural gas and natural gas substitutes that are conveyed into transmission and distribution grids are representative of the mass to which they are allocated.
NOTE To ensure that a particular gas is taken into account in the standard, please see Annex A.
This document is applicable for sampling at sites and locations where interchangeability criteria, energy content and network entry conditions are measured and monitored and is particularly relevant at cross border and fiscal measurement stations. It serves as an important source for control applications in natural gas processing and the measurement of trace components.
This document is applicable to natural dry gas (single phase - typically gas transiting through natural gas pipelines) sampling only. On occasion a natural gas flow can have entrained liquid hydrocarbons. Attempting to sample a wet natural gas flow introduces the possibility of extra unspecified uncertainties in the resulting flow composition analysis. Sampling a wet gas (two or three phases) flow is outside the scope of this document.
This document does not apply to the safety issues associated with gas sampling.