この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 10721 のこの部分では、建物における鋼材の使用と鋼構造の設計に関する原則と一般規則が定められています。
注 1信頼性の程度は、国家規格で指定されているとおりである必要があります。設計安全係数を確立する際には、鋼構造物の製造に関する ISO 10721-2 も十分に考慮する必要があります。
ISO 10721 のこの部分は、橋梁、海上、その他の土木工学および関連構造物にも適用されますが、そのような構造物については、他の要件を考慮する必要がある場合があります。
ISO 10721 のこの部分では、通常の大気条件を超える腐食環境における鋼構造の特別な要件や、疲労設計に関する腐食保護はカバーされていません。
ISO 10721 のこの部分は、耐震設計の特別な要件をカバーしていません。
溶接接続および疲労を受けやすい構造については、この文書の範囲に関する特別な考慮事項がそれぞれ 8.9 および 10.1 に示されています。
注 2鋼とコンクリートの複合構造および鋼構造の火災安全性に関する規則と推奨事項は、その後、別個の国際規格として発行される予定です。
1 Scope
This part of ISO 10721 establishes the principles and general rules for the use of steel materials and design of steel structures in buildings.
NOTE 1 The degree of reliability should be as specified in national codes. In the establishment of design safety factors, due consideration should also be given to ISO 10721-2 for fabrication of steel structures.
This part of ISO 10721 is also applicable to bridges, off-shore and other civil engineering and related structures, but for such structures it may be necessary to consider other requirements.
This part of ISO 10721 does not cover the special requirements for steel structures in corrosive environments beyond normal atmospheric conditions and corrosion protection with regard to fatigue design.
This part of ISO 10721 does not cover the special requirements of seismic design.
For welded connections and for structures subject to fatigue, special considerations regarding the scope of this document are presented in 8.9 and 10.1 respectively.
NOTE 2 Rules and recommendations regarding composite steel and concrete structures and fire safety of steel structures will subsequently be issued as separate International Standards.