この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
振動の伝達を低減するために、さまざまな種類のパッシブ防振装置が使用されています。例としては、自動車のエンジン マウント、建物の弾性サポート、船舶用機械の弾性マウントとフレキシブル シャフト カップリング、家庭用電化製品の小型アイソレータなどがあります。
ISO 10846 のこの部分は、線形弾性支持の低周波動的伝達剛性関数を測定するための駆動点法を指定します。これには、要素が特定の静的予荷重に対する振動挙動に対してほぼ線形性を示す場合、非線形の静的荷重-たわみ特性を持つ弾性サポートが含まれます。 ISO 10846 のこの部分は、弾性要素の振動音響特性の実験室測定の方法に関する一連の国際規格に属しており、測定原理、直接法、および間接法に関する文書も含まれています。 ISO 10846-1 は、適切な国際規格を選択するためのグローバル ガイダンスを提供します。
ISO 10846 のこの部分で説明されている実験室条件には、必要に応じて静的予圧の適用が含まれます。
ISO 10846 のこのパートで説明されている方法の結果は、低周波振動の問題を防止し、可聴周波数範囲の下部で構造伝達音を減衰させるために使用される弾性サポートに役立ちます。ただし、低周波振動または衝撃エクスカーションを減衰させるために使用される弾性要素の完全な特性評価には、この方法では提供されない追加情報が必要です。
Introduction
Passive vibration isolators of various kinds are used to reduce the transmission of vibration. Examples are automobile engine mounts, resilient supports for buildings, resilient mounts and flexible shaft couplings for shipboard machinery and small isolators in household appliances.
This part of ISO 10846 specifies a driving point method for measuring the low-frequency dynamic transfer stiffness function of linear resilient supports. This includes resilient supports with non-linear static load-deflection characteristics provided that the elements show an approximate linearity for vibration behaviour for a given static preload. This part of ISO 10846 belongs to a series of International Standards on methods for the laboratory measurement of vibro-acoustic properties of resilient elements, which also includes documents on measurement principles, on a direct method and on an indirect method. ISO 10846-1 provides global guidance for the selection of the appropriate International Standard.
The laboratory conditions described in this part of ISO 10846 include the application of static preload, where appropriate.
The results of the method described in this part of ISO 10846 are useful for resilient supports that are used to prevent low-frequency vibration problems and to attenuate structure-borne sound in the lower part of the audible frequency range. However, for complete characterization of resilient elements that are used to attenuate low-frequency vibration or shock excursions, additional information is needed, which is not provided by this method.