この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3341, テキスタイル ガラス — ヤーン — 破断力と破断伸びの測定
- ISO 6506-1, 金属材料 — ブリネル硬さ試験 — Part 1: 試験方法
- ISO 6508-1, 金属材料 — ロックウェル硬さ試験 — Part 1: 試験方法
- ISO 6892-1, 金属材料 - 引張試験 - Part 1: 室温での試験方法
- ISO 7225, ガスボンベ — 注意ラベル
- ISO 7866, ガスボンベ — 詰め替え可能な継ぎ目のないアルミニウム合金ガスボンベ — 設計、製造、および試験
- ISO 9809-1, ガスボンベ — 再充填可能な継ぎ目のない鋼製ガスボンベおよびチューブの設計、製造および試験 — Part 1: 引張強度が 1,100 MPa 未満の焼入れおよび焼き戻し済みの鋼製ボンベおよびチューブ
- ISO 9809-2, ガスボンベ — 詰め替え可能な継ぎ目のない鋼製ガスボンベおよびチューブの設計、製造および試験 — Part 2: 引張強度が 1 100 MPa 以上の焼入れおよび焼戻し鋼製ボンベおよびチューブ
- ISO 9809-3, ガス シリンダー — 詰め替え可能なシームレス スチール ガス シリンダーおよびチューブの設計、製造および試験 — Part 3: 規格化されたスチール シリンダーおよびチューブ
- ISO 9809-4, ガスボンベ — 再充填可能な継ぎ目のない鋼製ガスボンベ — 設計、製造および試験 — Part 4: 1 100 MPa 未満の Rm 値を持つステンレス鋼ボンベ
- ISO 10286, ガスボンベ — 語彙
- ISO 10618, 炭素繊維 — 樹脂含浸糸の引張特性の測定
- ISO 11114-1, ガスボンベ — ボンベおよびバルブ材料とガス内容物との適合性 — Part 1: 金属材料
- ISO 11114-4, 可搬型ガスボンベ — ボンベおよびバルブ材料とガス内容物との適合性 — Part 4: 水素脆化に耐性のある鋼を選択するための試験方法
- ISO 13341, ガスボンベ — ガスボンベへのバルブの取り付け
- ISO 13769, ガスシリンダー — スタンプマーキング
- ISO 14130, 繊維強化プラスチック複合材 — ショートビーム法による見かけの層間せん断強度の測定
- ASTM E1356-08, 示差走査熱量測定によるガラス転移温度の割り当てに関する標準試験方法
- ASTM D7269, アラミド糸の引張試験の標準試験方法
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3341, Textile glass — Yarns — Determination of breaking force and breaking elongation
- ISO 6506-1, Metallic materials — Brinell hardness test — Part 1: Test method
- ISO 6508-1, Metallic materials — Rockwell hardness test — Part 1: Test method
- ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
- ISO 7225, Gas cylinders — Precautionary labels
- ISO 7866, Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
- ISO 9809-1, Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
- ISO 9809-2, Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
- ISO 9809-3, Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 3: Normalized steel cylinders and tubes
- ISO 9809-4, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
- ISO 10286, Gas cylinders — Vocabulary
- ISO 10618, Carbon fibre — Determination of tensile properties of resin-impregnated yarn
- ISO 11114-1, Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
- ISO 11114-4, Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
- ISO 13341, Gas cylinders — Fitting of valves to gas cylinders
- ISO 13769, Gas cylinders — Stamp marking
- ISO 14130, Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
- ASTM E1356–08, Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM D7269, Standard test methods for tensile testing of aramid yarns