この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3 、優先番号 — 一連の優先番号
- ISO 3126, プラスチック配管システム - プラスチック部品 - 寸法の決定
- ISO 4427-1:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 1: 一般
- ISO 4427-2:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 2: パイプ
- ISO 4427-3, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 3: 継手
- ISO 4427-5:2007, プラスチック配管システム — 給水用のポリエチレン (PE) パイプおよび継手 — Part 5: システムの目的への適合性
- ISO 8772, 非加圧地下排水および下水用プラスチック配管システム — ポリエチレン (PE)
- ISO 9967, 熱可塑性プラスチックパイプ — クリープ率の決定
- ISO 11297-1:2018, 圧力下の地下排水および下水道ネットワークの改修のためのプラスチック配管システム — Part 1: 概要
- ISO 12176-1, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 1: 突合せ融着
- ISO 12176-2, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 2: 電気融着
- EN 12201-1, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- EN 12201-2:2011, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- EN 12201-3, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- EN 12201-4, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 4: 給水システム用バルブ
- EN 12201-5, 加圧下の給水、排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
- EN 12666-1, 非加圧地下排水および下水用プラスチック配管システム — ポリエチレン (PE) — Part 1: パイプ、継手およびシステムの仕様
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3 ,Preferred numbers — Series of preferred numbers
- ISO 3126, Plastics piping systems — Plastics components — Determination of dimensions
- ISO 4427-1:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
- ISO 4427-2:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
- ISO 4427-3, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
- ISO 4427-5:2007, Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
- ISO 8772, Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
- ISO 9967, Thermoplastics pipes — Determination of creep ratio
- ISO 11297-1:2018, Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
- ISO 12176-1, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
- ISO 12176-2, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
- EN 12201-1, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
- EN 12201-2:2011, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
- EN 12201-3, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
- EN 12201-4, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 4: Valves for water supply systems
- EN 12201-5, Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
- EN 12666-1, Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE) — Part 1: Specifications for pipes, fittings and the system