ISO 13199:2012 定常発生源排出量 — 非燃焼プロセスからの排ガス中の総揮発性有機化合物（TVOC）の測定 — 触媒コンバーターを備えた非分散型赤外線アナライザー

この規格プレビューページの目次

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

4 記号と略語

[1]	ISO 5725-2, 測定方法と結果の精度 (真度と精度) — Part 2: 標準測定方法の再現性と再現性を決定するための基本的な方法
[2]	ISO 9096, 固定発生源排出 — 粒子状物質の質量濃度の手動測定
[3]	ISO 12039:2001, 定常発生源排出 — 一酸化炭素、二酸化炭素、酸素の測定 — 自動測定システムの性能特性と校正
[4]	ISO/IEC Guide 98-3:2008, 測定の不確かさ — Part 3: 測定における不確かさの表現へのガイド (GUM:1995)
[5]	EN 13526, 定常発生源排出 — プロセスを使用した溶媒からの煙道ガス中の総ガス状有機炭素の質量濃度の測定 — 連続水素炎イオン化検出器法
[6]	EN 15259, 大気質 - 固定発生源排出の測定 - 測定セクションとサイト、および測定目的、計画、およびレポートの要件
[7]	EN 15267-3, 大気質 - 自動測定システムの認定 - Part 3: 固定発生源からの排出を監視するための自動測定システムの性能基準と試験手順

γ	TVOC mass concentration
	grand mean of measured TVOC mass concentration
φ	TVOC volume fraction ( = 10⁻⁶)
e_i	residual (lack of fit) at level i
k	coverage factor
M_C	molar mass of carbon ( = 12 g/mol)
n	number of measurements
s_j	standard deviation of level j
s_r_,_j	standard deviation of repeatability
s_R_,_j	standard deviation of reproducibility
u	standard uncertainty of TVOC mass concentration
	combined uncertainty of TVOC mass concentration
	expanded uncertainty of mass concentration
V_m	molar volume (22,4 l/mol)
C_V_,_r	coefficient of variation of repeatability
C_V_,_R	coefficient of variation of reproducibility
C_V_,_u	coefficient of variation of the standard uncertainty
	average of the measured values x_i
x_i	ith measured value
	average of the measured value at level i
	value estimated by the regression line at level i
AMS	automatic measuring system
NDIR	non-dispersive infrared absorption
QA	quality assurance
QC	quality control

[1]	ISO 5725-2, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
[2]	ISO 9096, Stationary source emissions — Manual determination of mass concentration of particulate matter
[3]	ISO 12039:2001, Stationary source emissions — Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring system
[4]	ISO/IEC Guide 98-3:2008, Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
[5]	EN 13526, Stationary source emissions — Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes — Continuous flame ionisation detector method
[6]	EN 15259, Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report
[7]	EN 15267-3, Air quality — Certification of automated measuring systems — Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources