この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 13577 のこのパートでは、工業用ガス熱加工装置 (TPE) の一部である保護および反応性雰囲気の生成と使用に関する安全要件を指定しています。
注記TPE に共通する一般的な安全要件は、ISO 13577-1 に規定されています (「はじめに」を参照)
ISO 13577 のこの部分では、熱化学反応によって生成される保護および反応性雰囲気ガスの生成と使用、および条項 4 と条項 5 にリストされている TPE の一部である TPE でのそれらの使用に関連する重大な危険、危険な状況、および事象を扱います。意図したとおりに、メーカーが予測した条件下で使用されます。
ISO 13577 のこの部分は、
- 手動遮断弁の下流およびそれを含む配管、
- 雰囲気ガス発生装置
- TPEで雰囲気ガスを使用するための追加機器、
- 安全装置、および
- 安全関連制御システムの機能要件
保護および反応性雰囲気ガスの生成と使用。
これは、TPE に統合された装置に限定された、TPE への雰囲気ガス、ソースガス、不活性ガス、プロセス液体の供給、および TPE からのそれらの除去に適用されます。
ISO 13577 のこの部分では、大気ガス システムとその TPE での使用に関連して予想される重大な危険についても詳しく説明し、これらの危険を軽減または排除するための適切な予防措置を指定しています。
この規格の対象となる配管およびコンポーネントの圧力の危険性は、附属書 C に記載されているグループ I の最大圧力/サイズの関係内にあります。
ISO 13577 のこの部分
- 設置、試運転、起動、操作、シャットダウン、およびメンテナンス中に人と財産の安全を確保するために満たす必要がある要件を指定します。
- TPEの一部とみなされない場合、煙道ガスダクトシステムに関連するリスクはカバーされません。
- TPE メイン ディスコネクトの上流のユーティリティ供給には適用されません。
- 半導体デバイスの TPE には適用されません。
- 過剰化学量論的燃焼からの空気や煙道ガスなど、大気を伴う TPE には適用されません。
- TPE の廃止措置は対象外です。
- 真空炉は対象外、
- ISO 13577-1 でカバーされているノイズの危険性を扱っていません。
- 発行日より前に製造された TPE および関連プラントでの雰囲気ガスの生成および使用には適用されません。
- 使用する情報に必要な要件を示します。
ISO 13577 のこの部分に従って設計された TPE は、TPE の周囲に爆発の可能性のある雰囲気を作成せず、爆発の可能性があるまたは危険な雰囲気のある場所に配置するようには設計されていません。
典型的な保護ガスと反応性ガスの表を附属書 B に示します。
1 Scope
This part of ISO 13577 specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE).
NOTE The general safety requirements common to TPE are provided in ISO 13577-1 (see Introduction).
This part of ISO 13577 deals with significant hazards, hazardous situations and events relevant to the generation and use of protective and reactive atmosphere gases created by thermochemical reactions and their use in TPE that are part of TPE as listed in Clause 4 and Clause 5, when used as intended and under the conditions foreseen by the manufacturer.
This part of ISO 13577 covers
- pipework downstream of and including the manual isolating valve,
- equipment for the generation of atmosphere gases,
- additional equipment for the use of atmosphere gases in TPE,
- safety devices, and
- functional requirements for safety related control system
for the generation and use of protective and reactive atmosphere gases.
It applies to the supply of atmosphere gas, source gas, inert gas and process liquids to TPE and their removal from TPE, confined to equipment integrated in the TPE.
This part of ISO 13577 also details the anticipated significant hazards associated with atmosphere gas systems and their use in TPE and specifies the appropriate preventative measures for the reduction or elimination of these hazards.
The pressure hazard of the piping and components covered by this standard is within the maximum pressure/size relationship of group I as described in Annex C.
This part of ISO 13577
- specifies the requirements to be met to ensure the safety of persons and property during installation, commissioning, start up, operation, shutdown and maintenance,
- does not cover the relevant risks involved in the flue gas ducting system when it is not considered a part of TPE,
- is not applicable to utility supply upstream of the TPE main disconnects,
- does not apply to TPE for semi-conductor devices,
- does not apply to TPE with atmosphere, such as air and flue gas from an over stoichiometric combustion,
- does not cover the decommissioning of the TPE,
- does not cover vacuum furnaces,
- does not deal with the hazard of noise which is covered in ISO 13577-1,
- is not applicable to generation and use of atmosphere gas in TPE and associated plant which is manufactured before the date of its publication, and
- gives the necessary requirements for the information for use.
A TPE designed according to this part of ISO 13577 does not create any potentially explosive atmosphere in the area around the TPE and is not designed to be located in an area with a potentially explosive or hazardous atmosphere.
A table of typical protective and reactive gases is given in Annex B.