この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2942, 油圧流体力 — フィルターエレメント — 製造の完全性の検証と最初のバブルポイントの決定
- ISO 3968, 油圧流体力 — フィルター — 差圧対流量の評価
- ISO 4021, 油圧流体動力 - 微粒子汚染分析 - オペレーティング システムのラインからの流体サンプルの抽出
- ISO 4405, 油圧流体動力 - 流体汚染 - 重量法による粒子汚染の測定
- ISO 5598, 流体力システムおよびコンポーネント — 語彙
- ISO 11171, 油圧流体力 — 液体用自動粒子計数器の校正
- ISO 11218, 航空宇宙 — 作動油の清浄度分類
- ISO 11943, 油圧流体力 — 液体用のオンライン自動粒子計数システム — 校正および検証の方法
- ISO 12103-1:2024, 道路車両 — フィルター評価のためのテスト汚染物質 — Part 1: アリゾナテストダスト
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2942, Hydraulic fluid power — Filter elements — Verification of fabrication integrity and determination of the first bubble point
- ISO 3968, Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow
- ISO 4021, Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
- ISO 4405, Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method
- ISO 5598, Fluid power systems and components — Vocabulary
- ISO 11171, Hydraulic fluid power — Calibration of automatic particle counters for liquids
- ISO 11218, Aerospace — Cleanliness classification for hydraulic fluids
- ISO 11943, Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation
- ISO 12103-1:2024, Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust