この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 14122 のこの部分では、固定機械の一部である固定はしご、および固定はしごシステムの非動力調整可能部品 (折りたたみ式、スライド式など) および可動部品に対する要件が規定されています。
注 1 「固定」アクセス手段とは、工具を使用しないと取り外せないような方法 (たとえば、ネジ、ナット、溶接など) で取り付けられているものを指します。
ISO 14122 のこの部分では、機械が設置されてwhere 建物または土木構造物の一部 (固定はしごなど) と同じアクセス手段が必要な場合にも適用される最小要件を指定しています。構造は機械へのアクセス手段を提供することです。
注 2現地の規制や規格が存在しない場合、ISO 14122 のこの部分は、規格の範囲外のアクセス手段にも使用される場合があります。
ISO 14122 のこの部分は、固定はしごシステムの要件を与えるために ISO 14122-1 とともに使用されることが意図されています。
ISO 14122 シリーズは全体として、固定アクセス手段が必要where 固定機械と移動機械の両方に適用できます。エレベーター、エスカレーター、または 2 つのレベル間で人を持ち上げるために特別に設計されたその他の装置などの動力付きアクセス手段には適用されません。
ISO 14122 のこの部分は、発行日より前に製造された機械には適用されません。
1 Scope
This part of ISO 14122 gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems.
NOTE 1 “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. fixed ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exists, this part of ISO 14122 may be used also for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with ISO 14122-1 to give the requirements for fixed ladder systems.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
This part of ISO 14122 is not applicable to machinery manufactured before the date of its publication.