この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 14, 宇宙システムおよび運用によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 14302:2002) を取り消して置き換えるものです。
主な変更点は次のとおりです。
- AIAA, ECSS, MIL-STD などの関連する標準文書を更新し、米国の AIAA および ECSS 内でこの分野で過去 10 年間に達成された新しい作業を考慮しています。特に宇宙では、地球観測、通信などのために EM スペクトルを利用する軌道上の送信機と受信機がさらに多くあります。
- プロジェクトの EMC 計画、設計、分析、およびテスト/評価フェーズのタイムラインを明確にするために、EMC フローチャートを含める。
- より高速なデジタル デバイス、データ バスとクロック周波数、および PWM 信号によるスイッチ モード電源を備えた電子機器の変更を考慮して、マルチパクション、相互変調、および静電放電に関する技術要件を含める。
- 80 年代の伝統的な仕様との類似性により、機器がまだ認定されているか、認定されていることを考慮して、技術要件の更新。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space systems and operations.
This second edition cancels and replaces the first edition (ISO 14302:2002), which has been technically revised.
The main changes are as follows:
- updating related standard documents such as AIAA, ECSS, MIL-STD and etc., considering with new work has been accomplished over the past 10 years in this field within the US AIAA and ECSS. Particularly in space - there are many more orbiting transmitters and receivers exploiting the EM spectrum for earth observation, communications etc.;
- the inclusion of EMC flow chart to clarify timeline for EMC plan, design, analysis and test/evaluation phase of project;
- the inclusion of technical requirements for multipaction, intermodulation and electrostatic discharge with consideration of changes of electronic equipment with higher speed digital devices, data bus & clock frequencies, and switch mode Power supplies by PWM signalling;
- updating of technical requirements, taking into account that equipment is still being qualified or qualified by similarity to heritage specifications from the 80's.