この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、硝酸蒸気を使用して金コーティング、特に電気接点に使用される電着およびクラッド金属の気孔率を測定するための装置と方法を指定しています。
この方法は、空隙率レベルが、ユーザーが意図した用途に許容できると経験的に考える値よりも小さいか大きいかを示すように設計されています。
これは、75% 以上の金を含むインレーまたはクラッディング、95% 以上の金を含む電着、または電気接点で一般的に使用される銅、ニッケルおよびそれらの合金の基板に適しています。
硝酸蒸気試験は、厚さが 0.6 μm 未満の金コーティングに使用するには厳しすぎる。また、パラジウムとその合金、または金でフラッシュされたパラジウムとその合金など、金やプラチナより貴ではないコーティングにも適していません。
ISO 10308 および文献には、他のいくつかの気孔率試験方法が記載されています (参考文献 [1] および [2] などを参照)
1 Scope
This International Standard specifies equipment and a method for using nitric acid vapour to determine porosity in gold coatings, particularly electrodeposits and clad metals used on electrical contacts.
This method is designed to show whether the porosity level is less than or greater than some value that, by experience, is considered by the user to be acceptable for the intended application.
It is suitable for inlays or claddings containing 75 % or more of gold, for electrodeposits containing 95 % or more of gold or for substrates of copper, nickel and their alloys that are commonly used in electrical contacts.
The nitric acid vapour test is too severe to be used for gold coatings less than 0,6 μm thick. It is also not suitable for coatings that are less noble than gold or platinum, such as palladium and its alloys, or gold-flashed palladium and its alloys.
Several other porosity testing methods are described in ISO 10308 and in the literature (see e.g. Bibliography, [1] and [2]).