※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 67, 低炭素エネルギーを含む石油およびガス産業、小委員会 SC 2, パイプライン輸送システムによって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 15590-1:2018) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- グリーンおよび低炭素化の発展に対応して、ISO/TC 67 の新しいタイトルと一致するようにタイトルを変更しました。
- 高周波曲げ工程を鋼種に応じて局所加熱工程と全体加熱工程に分類した。
- 移行ゾーンにおける溶接の試験要件を削除しました。
- 曲げ中立軸母材からサンプルを抽出するためのテスト要件を追加しました。
- 引張試験用に、厚みを減らして剥離した試験片を追加しました。
- 再テストの要件を追加。
- 銅汚染に関する非破壊検査の追加条件を追加しました。
ISO 15590 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 67, Oil and gas industries including lower carbon energy, Subcommittee SC 2, Pipeline transportation systems.
This fourth edition cancels and replaces the third edition (ISO 15590-1:2018), which has been technically revised.
The main changes are as follows:
- changed the title to be consistent with the new title of ISO/TC 67 in response to the green and lower carbon development;
- classified the induction bending process into local heating process and global heating process according to the steel grade;
- removed the testing requirements of welds in transition zone;
- added a testing requirement for extracting samples from the bend neutral axis base metal;
- added the delaminated test pieces with reduced thickness for tensile testing;
- added requirements for retesting;
- added an additional condition for non-destructive testing in regards of copper pollution.
A list of all parts in the ISO 15590 series can be found on the ISO website.