※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 18213 のこの部分では、液体含有量を決定するための圧力測定システムを備えた原子力プロセス タンクのタンク校正と容量決定の手順について説明しています。具体的には、タンクの容積を推定するための測定式に必要なデータを取得するために行われる較正作業を計画するための全体的なガイダンスが提供されます。手順の重要なステップは、その後、推定された体積測定方程式を使用してタンクの液体体積を決定するためにも提示されます。
提示された手順は、液体含有量を測定するためのバブラー プローブ システムを備えたタンクに特に適用されます。さらに、これらの手順は、熱平衡と静的平衡の両方にある透明な (つまり、懸濁固体のない) 均一な液体に対してのみ信頼できる結果を生成します。
参考文献
| [1] | ANSI N15.19-1989, 核物質管理 - 容量校正技術 |
| [2] | ISO 18213-2:2007, 核燃料技術 — 核物質会計のためのタンク校正および容量決定 — Part 2: タンク校正のためのデータ標準化 |
| [3] | ISO 18213-3:—、核燃料技術 — 核物質会計のためのタンクの校正と体積決定 — Part 3: 統計的手法 |
| [4] | ISO 18213-4:—、核燃料技術 — 核物質会計のためのタンクの較正と体積決定 — Part 4: ディップ チューブを備えた会計タンク内の液体の高さの正確な決定、遅いバブリング速度 |
| [5] | ISO 18213-5:—、核燃料技術 — 核物質会計のためのタンクの校正と体積決定 — Part 5: ディップ チューブを装備した会計タンク内の液体の高さの正確な決定、高速バブリング速度 |
| [6] | ISO 18213-6, 核燃料技術 — 核物質会計のためのタンク校正と体積測定 — Part 6: ディップ チューブを備えた会計容器内の液体密度の正確なタンク内測定 |
| [7] | Jones, FE and Schoonover, RM 2002. Handbook of Mass Measurement , Chapter 14: "Calculation of the Density of Water", CRC Press, Boca Raton Florida, USA |
| [8] | Liebetrau , AM and T homas , IR, 1993, Uncertainty Estimates for Volume Calibration Measurements that Exhibit Significant Run-to-Run Variability, Nuclear Materials Management , 22 (Proceedings Issue), pp. 394-411 |
1 Scope
This part of ISO 18213 describes procedures for tank calibration and volume determination for nuclear process tanks equipped with pressure-measurement systems for determining liquid content. Specifically, overall guidance is provided for planning a calibration exercise undertaken to obtain the data required for the measurement equation to estimate a tank’s volume. The key steps in the procedure are also presented for subsequently using the estimated volume-measurement equation to determine tank liquid volumes.
The procedures presented apply specifically to tanks equipped with bubbler probe systems for measuring liquid content. Moreover, these procedures produce reliable results only for clear (i.e. without suspended solids), homogeneous liquids that are at both thermal and static equilibrium.
Bibliography
| [1] | ANSI N15.19-1989, Nuclear Materials Control — Volume Calibration Techniques |
| [2] | ISO 18213-2:2007, Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 2: Data standardization for tank calibration |
| [3] | ISO 18213-3:—, Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 3: Statistical methods |
| [4] | ISO 18213-4:—, Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 4: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, slow bubbling rate |
| [5] | ISO 18213-5:—, Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, fast bubbling rate |
| [6] | ISO 18213-6, Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 6: Accurate in-tank determination of liquid density in accountancy vessels equipped with dip tubes |
| [7] | Jones, F.E. and Schoonover, R.M. 2002. Handbook of Mass Measurement, Chapter 14: “Calculation of the Density of Water”, CRC Press, Boca Raton Florida, USA |
| [8] | Liebetrau, A.M. and Thomas, I.R., 1993, Uncertainty Estimates for Volume Calibration Measurements that Exhibit Significant Run-to-Run Variability, Nuclear Materials Management, 22 (Proceedings Issue), pp. 394-411 |