この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 472, プラスチック - 語彙
- ISO 483, プラスチック — 水溶液を使用して湿度を一定値に維持する調整および試験用の小型筐体
- ISO 2041, 機械的振動、衝撃、状態監視 — 語彙
- ISO 4664-1, ゴム、加硫または熱可塑性 — 動的特性の決定 — Part 1: 一般的なガイダンス
- ISO 6721-1, プラスチック — 動的機械特性の決定 — Part 1: 一般原則
- ISO 6721-4, プラスチック — 動的機械特性の測定 — Part 4: 引張振動 — 非共振法
- ISO 6721-6, プラスチック — 動的機械特性の測定 — Part 6: せん断振動 — 非共振法
- ISO 10112, 減衰材料 — 複素弾性率のグラフ表示
- ISO 10846-1, 音響および振動 — 弾性要素の振動音響伝達特性の実験室測定 — Part 1: 原則とガイドライン
- ISO 23529, ゴム — 物理的試験方法のための試験片の準備とコンディショニングの一般的な手順
注記ISO 10846-1 は、弾性固定具の動的入力と伝達剛性、および機械的抵抗の全体的な測定に関係しています。 ISO 18437 のこの部分は、固定具で使用される粘弾性材料の動的ヤング率、せん断弾性率、体積弾性率、および対応する損失係数の特性評価に関係しています。
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 472, Plastics — Vocabulary
- ISO 483, Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
- ISO 2041, Mechanical vibration, shock and condition monitoring — Vocabulary
- ISO 4664-1, Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
- ISO 6721-1, Plastics —Determination of dynamic mechanical properties — Part 1: General principles
- ISO 6721-4, Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
- ISO 6721-6, Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
- ISO 10112, Damping materials — Graphical presentation of the complex modulus
- ISO 10846-1, Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines
- ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
NOTE ISO 10846-1 is concerned with the global measurement of dynamic input and transfer stiffness and mechanical resistance of resilient fixtures. This part of ISO 18437 is concerned with the characterization of the dynamic Young modulus, shear modulus, bulk modulus, and corresponding loss factors of the visco-elastic materials that are used in the fixtures.