※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 226 です。
この第 2 版は、第 1 版 (ISO 18515:2007) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
1 スコープ
この国際規格は、固体炭素およびグラファイト材料の室温での圧縮強度を決定する方法を規定しています。
注ISO 18515 は DIN 51910 に基づいています。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7500-1, 金属材料 — 静的一軸試験機の検証 — Part 1:
引張/圧縮試験機 — 力測定システムの検証と校正 - ISO 8007-1, アルミニウムの生産に使用される炭素質材料 - サンプリング計画と個々のユニットからのサンプリング - Part 1: 陰極ブロック
- ISO 8007-2, アルミニウムの生産に使用される炭素質材料 - サンプリング計画と個々のユニットからのサンプリング - Part 2: プリベーク アノード
- ISO 8007-3, アルミニウムの製造に使用される炭素質材料 - サンプリング計画と個々のユニットからのサンプリング - Part 3: サイドウォール ブロック
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
圧縮強度
σdB
破壊に至る圧縮実験中の最大力 ( Fmax)と試験片の初期断面A比
どこ
Fmaxはニュートン単位の最大力です。
Aは初期断面で、メートル単位で二乗されます。
注記2圧縮強度はメガパスカル(MPa)で表される。
注記3一般に、試験機に表示される最大力と破壊時の力は似ていますが、それらが異なる場合、この用語は表示される最大力を指します。
参考文献
| [1] | ISO 13385-1, 幾何学的製品仕様 (GPS) — 寸法測定装置 — Part 1: キャリパー;設計と計測特性 |
| [1] | DIN 51910, 炭素質材料の試験 - 圧縮強度の測定 - 固体材料 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 226.
This second edition cancels and replaces the first edition (ISO 18515:2007), of which it constitutes a minor revision.
1 Scope
This International Standard specifies a method to determine the compressive strength of solid carbon and graphite materials at room temperature.
NOTE ISO 18515 is based on DIN 51910.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Verification and calibration of the force-measuring system - ISO 8007-1, Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 1: Cathode blocks
- ISO 8007-2, Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 2: Prebaked anodes
- ISO 8007-3, Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 3: Sidewall blocks
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
compressive strength
σdB
ratio of the maximum force (Fmax) during a compressive experiment leading to fracture and the initial cross-section, A, of the specimen
where
Fmaxis the maximum force in newton;
Ais the initial cross-section, in meter squared.
Note 2 to entry: The compressive strength is expressed in Mega Pascal (MPa).
Note 3 to entry: Generally, the maximum force displayed on the test machine and the force at fracture is similar, if they are different, the term refers to the maximum force displayed.
Bibliography
| [1] | ISO 13385-1, Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics |
| [1] | DIN 51910, Testing of carbonaceous materials — Determination of compressive strength — Solid materials |