この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
光ディスク素材の使用は、オーディオ、ビデオ、およびコンピューターのアプリケーションで広く使用されています。この情報の保存は、特に記録された情報が古くなり、図書館、アーカイブ、博物館、政府機関、商業団体にとって価値が高まるにつれて、社会の関心が高まっています。
光ディスクの安定性は、システム全体の安定性に依存します。これには、素材自体の安定性、ディスクを実行する機器、システム内で必要なソフトウェアの安定性が含まれます。 ISO 18921 は、CD-ROM の期待寿命を見積もるための方法を指定しています。他の光ディスクについては、将来の国際規格で取り上げられる予定です。これらの規格では温度と湿度の影響のみが考慮されており、光、腐食性ガス、粒子などの他の要因は含まれていません。ハードウェアの平均寿命や、ハードウェアの磨耗や老朽化に伴う問題については、国際標準がありません。
光ディスクのユーザーは、ディスクの寿命を延ばす条件下でディスクを保管し、使用中にストレスを受けたり物理的な故障が生じたりしないように材料を取り扱うことをお勧めします。この国際規格は、長期保管の懸念に対処します。
多数の光ディスクの主な構成要素はポリカーボネート基板です。ポリカーボネートは非常に耐久性のある素材ですが、湿気を吸収するため、周囲の湿度とディスクの含水率の間には常に平衡が保たれています。ポリカーボネートは、特定の条件下および適切な触媒を使用すると分解しやすくなります。
ほとんどの光ディスクの 2 番目のコンポーネントは反射層です。この層は通常、アルミニウム、銀、金などの反射性の高い金属です。これらの材料はそれぞれ、環境中に存在するさまざまな化学物質と反応します。たとえば、アルミニウムは酸素と容易に結合して酸化アルミニウムを形成します。銀は硫黄と結合して変色し、硫化銀を形成します。金は塩素と反応して塩化金を形成することが知られています。
これらのディスクの 3 番目のコンポーネントは、ある種のシール コートです。これは通常、UV 硬化ポリマーであり、その目的はディスク内の反射層およびその他の材料層を保護することです。
一部の記録可能な光ディスクの場合、4 番目のコンポーネントは色素層です。光磁気ディスクまたは相変化ディスクの場合は、追加の層も含まれます。
さまざまなディスク層の固有の安定性に関係なく、良好な保管条件がすべての光ディスクの寿命を延ばすことが知られています。良好な保管環境では、すでに発生した劣化を元に戻すことはできませんが、さらなる劣化を遅らせることはできます。
この国際規格には単一の保管条件が記載されています。この条件は、長期価値のある情報が記録されたディスクを対象としています。さまざまなメーカーの研究によると、適切に製造された光ディスクの平均寿命は、一般的な室内環境条件下では 50 年を超えています (参考文献 [1] および [2] を参照)
Introduction
Use of optical disc material is becoming widespread in audio, video, and computer applications. Preservation of this information is becoming of increasing concern to society, particularly as the recorded information becomes older and frequently of greater value to libraries, archives, museums, government agencies, and commercial organizations.
The stability of optical discs is dependent upon that of the complete system. This includes the stability of the material itself, the equipment on which it is run and, in systems, upon the necessary software. ISO 18921 specifies a methodology for estimating the life expectancy of the CD-ROM. Other optical discs will be addressed in future International Standards. These standards consider only the effects of temperature and humidity and do not include other factors such as light, corrosive gases, and particulates. International Standards are not available on the life expectancy of hardware and the problems associated with hardware wearing out or becoming obsolete.
It is advisable that optical disc users store discs under conditions that will extend their life and handle the material so that it will not be subjected to stress and undergo physical breakdown during use. This International Standard addresses the concerns of long-term storage.
A major component of a large number of optical discs is the polycarbonate substrate. Polycarbonate is a very durable material, but it does absorb moisture and there is always an equilibrium between the ambient humidity and the moisture content of the disc. Polycarbonate is susceptible to decomposition under certain conditions and given a suitable catalyst.
The second component of most optical discs is the reflective layer. This layer is usually some highly reflective metal such as aluminium, silver, or gold. Each of these materials is subject to reaction with various chemicals that can be found in the environment. Aluminium, for example, combines readily with oxygen to form aluminium oxide. Silver combines with sulfur to tarnish and form silver sulfides. Gold is known to react with chlorine to form gold chlorides.
A third component of these discs is some type of seal coat. This is typically a UV-cured polymer whose purpose is to protect the reflective layer and any other material layers in the disc.
A fourth component, in the case of some recordable optical discs, is the dye layer. For magneto-optic or phase change discs, additional layers are also included.
Regardless of the inherent stability of the various disc layers, it is known that good storage conditions will extend the life of all optical discs. While a good storage environment cannot reverse any degradation that has already occurred, it can slow down additional deterioration.
A single storage condition is described in this International Standard. This condition is intended for discs that contain recorded information of long-term value. Various manufacturers’ studies indicate that the life expectancy of well-manufactured optical discs is in excess of 50 years under typical room ambient conditions (see References [1] and[2]).