この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、屋外条件にさらされたときの写真カラー画像の色安定性を決定するための試験装置と試験手順について説明しています。許容範囲または失敗基準の制限は指定されていません。代わりに、絵画写真画像のエージング中に発生する画像の変化を測定する手段を提供し、報告する必要がある重要な画像変化のパラメーターを示します。この国際規格の使用者は、どの試験エンドポイントが意図された表示アプリケーションを最もよくシミュレートするかを決定する必要があります。
この国際規格は、次のようなデジタル印刷媒体で作成された画像に適用されます。
- コーティングされた紙、コーティングされたおよびコーティングされていない透明および不透明なフィルム、ビニール、ポリエステル、合成紙およびその他のプラスチック素材、ラミネート加工されているかどうかにかかわらず印刷します。
- 水性、溶剤、相変化、または UV 硬化インクを使用した染料ベースおよび顔料ベースのインクジェット印刷。
- 熱染料および物質移動;
- 染料昇華プリント;
- デジタル印刷された染料拡散転写プリント。
- 液体および乾式トナーの電子写真印刷。
- 液体トナー静電プリント。
- 従来の発色性および銀染料漂白写真材料で作成されたデジタル印刷された画像。
- カラーダイレクトサーマルプリント。
これらのデジタル印刷プロセスでは、インクの配置はデジタル ピクセル情報によって制御され、印刷システムのすべての設定と制御を文書化して繰り返すことができます。対照的に、多くのアナログ印刷システムでは、インク膜厚の制御を手動で調整する必要があります。窓の外側の窓のグラフィックは、この国際規格でカバーされています。太陽光がガラスの層によってフィルタリングされる窓の内側の窓のグラフィックは、ISO 18937 でカバーされます。
この国際規格には、画像、支持体、またはバインダー材料の物理的安定性に関する試験手順は含まれていません。しかしながら、場合によっては、支持体の脆化、画像層のひび割れ、または支持体からの画像層の剥離などの物理的劣化が、画像の安定性ではなく、印刷材料の耐用年数を決定することが認識されています。
注記あるプリンタ モデル、インク セット、印刷モード、印刷解像度、およびメディアの組み合わせについて決定された画像印刷の安定性の結果は、別のプリンタ モデル、インク セット、印刷モード、印刷解像度、およびメディアの組み合わせで作成された画像印刷には適用されません。テストで使用されるジェット カートリッジおよび/またはメディアは同じです。
1 Scope
This International Standard describes test equipment and test procedures for determining the colour stability of photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptability or failure criteria. Instead, it provides means for measuring image changes that take place during the aging of pictorial photographic images and indicates the critical image-change parameters that should be reported. Users of this International Standard should determine which test end-points best simulate the intended display application.
This International Standard is applicable to pictorial images made with digital printing media, for example:
- prints on coated papers, coated and uncoated clear and opaque films, vinyl, polyester, synthetic papers and other plastic substrates, laminated and not laminated;
- dye-based and pigment-based inkjet prints with aqueous, solvent, phase-change, or UV curing inks;
- thermal dye and mass transfer;
- dye sublimation prints;
- digitally-printed dye-diffusion-transfer prints;
- liquid- and dry-toner xerographic prints;
- liquid toner electrostatic prints;
- digitally printed images made with traditional chromogenic and silver dye-bleach photographic materials;
- colour direct thermal prints.
In these digital printing processes, the ink laydown is controlled by means of digital pixel information, and all of the settings and controls of the printing system can be documented and repeated. In contrast, for many analogue printing systems, the control over the ink film thickness can be subject to manual adjustment. Window graphics on the outside of windows are covered by this International Standard. Window graphics on the inside of windows, for which sunlight is filtered by a layer of glass, will be covered by ISO 18937.
This International Standard does not include test procedures for physical stability of images, supports or binder materials. However, it is recognized that in some instances physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than image stability, will determine the useful life of a print material.
NOTE Image print stability results determined for one printer model, ink set, printing mode, print resolution and media combination are not applicable to image prints produced through another printer model, ink set, printing mode, print resolution and media combination, even if the ink jet cartridges and/or media used in testing are the same.