この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 127, 土工機械、小委員会 SC 2, 安全性、人間工学および一般要件によって作成されました。
ISO 19014-1 のこの第 1 版は、ISO 19014-2, ISO 19014-3, ISO 19014-4, および ISO/TS 19014-5 とともに、技術的に廃止された ISO 15998 および ISO/TS 15998-2 を取り消し、置き換えます。改訂。
以前のドキュメントと比較した主な変更点は次のとおりです。
- 性能レベルの決定方法と機械制御システムの安全性分析、
- モバイルマシンの追加要件、
- 安全制御システムのコンポーネントの環境試験要件、および
- ソフトウェアの検証とマシンのパフォーマンス レベルの検証の要件。
ISO 19014-1:2018 のこの修正バージョンには、次の修正が含まれています。
- 4.2 c) 2)、4.2 d) 1)、6.1 および付録 C, 4.2 で定義された手順への相互参照が修正されました。
ISO 19014 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。この文書の発行時点では、 Part 2 部「安全関連機械制御システムの設計と評価」 、 Part 4部「制御システムの安全関連部分のソフトウェアおよび伝送の設計と評価」 、およびPart 5 部「性能レベルの表」となっています。 、開発中です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics and general requirements.
This first edition of ISO 19014-1, together with ISO 19014-2, ISO 19014-3, ISO 19014-4 and ISO/TS 19014-5, cancels and replaces ISO 15998 and ISO/TS 15998-2, which have been technically revised.
The main changes compared to the previous documents are as follows:
- method for determination of performance levels and machine control system safety analysis,
- additional requirements for mobile machines,
- environmental test requirements for components of safety controls systems, and
- requirements for software validation and verification of machine performance levels.
This corrected version of ISO 19014-1:2018 incorporates the following corrections:
- 4.2 c) 2), 4.2 d) 1), 6.1 and Annex C, the cross-references to the steps defined in 4.2 have been corrected.
A list of all parts in the ISO 19014-series can be found on the ISO website. At the time of publication of this document, Part 2, Design and evaluation of safety-related machine control systems, Part 4, Design and evaluation of software and transmission for safety related parts of the control system, and Part 5, Tables of performance levels, are under development.