この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO/TC 211地理情報/地理学技術委員会が Open Geospatial Consortium (OGC) と緊密に協力して作成したものです。
この第 2 版は、技術的に改訂された第 1 版 (ISO 19162:2015) を廃止し、置き換えます。
前版との主な変更点は以下の通りです。
- ISO 19111:2019 で前版 ISO 19111:2007 から行われた変更を反映する更新。動的測地基準系、3 次元投影座標参照系、データムアンサンブル、および座標メタデータを記述します。
- ISO 19111:2019で行われた変更を反映するため、時間座標参照系の記述を再構築。
- 軽微な間違いの修正。
詳細は付録 D に記載されています。
ISO/IEC 指令、 Part 2, 2018, 国際規格の構造と草案に関する規則に従って、国際規格では、小数点記号は行上のカンマです。しかし、度量衡総会 (Conférence Générale des Poids et Mesures) は2003 年の会合で以下の決議を全会一致で可決しました。
「小数点記号は、線上の点または線上のコンマのいずれかでなければなりません。」
実際には、これらの選択肢のどちらを選択するかは、該当する言語での慣例的な使用法によって異なります。測地学と地理情報の技術分野では、すべての言語で常に小数点が使用されるのが通例です。この実践は、このドキュメント全体で使用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics in close collaboration with the Open Geospatial Consortium (OGC).
This second edition cancels and replaces the first edition (ISO 19162:2015), which has been technically revised.
The main changes compared to the previous edition are as follows:
- updates to reflect the changes made in ISO 19111:2019 from its previous edition ISO 19111:2007 to describe dynamic geodetic reference frames, three-dimensional projected coordinate reference systems, datum ensembles and coordinate metadata;
- remodelling of the descriptions of temporal coordinate reference systems, to reflect the changes made in ISO 19111:2019;
- the correction of minor errors.
Further details are given in Annex D.
In accordance with the ISO/IEC Directives, Part 2, 2018, Rules for the structure and drafting of International Standards, in International Standards the decimal sign is a comma on the line. However, the General Conference on Weights and Measures (Conférence Générale des Poids et Mesures) at its meeting in 2003 passed unanimously the following resolution:
“The decimal marker shall be either a point on the line or a comma on the line.”
In practice, the choice between these alternatives depends on customary use in the language concerned. In the technical areas of geodesy and geographic information it is customary for the decimal point always to be used, for all languages. That practice is used throughout this document.