この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
TC 67 によって作成された海洋構造物に関する国際規格 (つまり、ISO 19900, ISO 19902, ISO 19903, ISO 19904, および ISO 19906) は、世界中の石油および天然ガス産業で使用されるすべての海洋構造物の設計要件と評価に対応しています。それらの適用を通じて、構造の種類や使用される材料の性質や組み合わせに関係なく、有人および無人の海洋構造物に適した信頼性レベルを達成することを目的としています。
構造的完全性は、動作、構造解析、設計または評価規則、安全要素、仕上がり、品質管理手順、および国内要件を記述するためのモデルで構成される全体的な概念であり、これらはすべて相互に依存しています。単独での設計または評価の 1 つの側面の変更は、全体的な概念または構造システムに固有の信頼性のバランスを乱す可能性がある. したがって、変更に伴う影響は、すべての海洋構造システムの全体的な信頼性との関係で考慮する必要がある.
TC 67 によって作成された海洋構造物に関する国際規格は、技術革新を妨げることなく、構造の構成、材料、および技術の選択において広い自由度を提供することを目的としています。したがって、これらの国際規格を使用するには、適切な工学的判断が必要です。
構造的完全性の全体的な概念は上で説明されています。耐震設計には、いくつかの追加の考慮事項が適用されます。これらには、地震イベントのマグニチュードと確率、オフショア構造の使用と重要性、検討中の構造の堅牢性、およびさまざまな確率の地震活動による許容可能な損傷が含まれます。これらすべて、およびその他の関連情報は、構造の全体的な信頼性に関連して考慮する必要があります。
地震条件は世界中で大きく異なり、設計基準は主に歴史的な地震イベントの観察と地震テクトニクスの考慮に依存しています。多くの場合、構造物の設計または評価を完了するには、サイト固有の地震ハザード評価が必要になります。
この文書は、さまざまな種類の海洋構造物に対する一般的な耐震設計手順と、耐震設計基準を導出するための枠組みを提供することを目的としています。その他の要件は、一般的な要件である国際規格 ISO 19900 と、構造固有の国際規格である ISO 19902, ISO 19903, ISO 19904, および ISO 19906 に含まれています。移動式オフショア ユニットに関連する地震事象の考慮については、 ISO19905シリーズ。
Introduction
The International Standards on offshore structures prepared by TC 67 (i.e. ISO 19900, ISO 19902, ISO 19903, ISO 19904 and ISO 19906) address design requirements and assessments of all offshore structures used by the petroleum and natural gas industries worldwide. Through their application, the intention is to achieve reliability levels appropriate for manned and unmanned offshore structures, whatever the type of structure and the nature or combination of the materials used.
Structural integrity is an overall concept comprising models for describing actions, structural analyses, design or assessment rules, safety elements, workmanship, quality control procedures and national requirements, all of which are mutually dependent. The modification of one aspect of design or assessment in isolation can disturb the balance of reliability inherent in the overall concept or structural system. The implications involved in modifications, therefore, need to be considered in relation to the overall reliability of all offshore structural systems.
The International Standards on offshore structures prepared by TC 67 are intended to provide a wide latitude in the choice of structural configurations, materials and techniques without hindering innovation. Sound engineering judgement is, therefore, necessary in the use of these International Standards.
The overall concept of structural integrity is described above. Some additional considerations apply for seismic design. These include the magnitude and probability of seismic events, the use and importance of the offshore structure, the robustness of the structure under consideration and the allowable damage due to seismic actions with different probabilities. All of these, and any other relevant information, need to be considered in relation to the overall reliability of the structure.
Seismic conditions vary widely around the world, and the design criteria depend primarily on observations of historical seismic events together with consideration of seismotectonics. In many cases, site-specific seismic hazard assessments will be required to complete the design or assessment of a structure.
This document is intended to provide general seismic design procedures for different types of offshore structures, and a framework for the derivation of seismic design criteria. Further requirements are contained within the general requirements International Standard, ISO 19900, and within the structure-specific International Standards, ISO 19902, ISO 19903, ISO 19904 and ISO 19906. The consideration of seismic events in connection with mobile offshore units is addressed in the ISO 19905 series.