※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、沿岸域と河口にある次のタイプの構造物に対する波と流れの作用を決定する原則について説明しています。
- 防波堤:
- がれきマウンド防波堤;
- 垂直および複合防波堤;
- ウェーブスクリーン;
- フローティング防波堤;
沿岸堤防;
シーウォール
円筒形の構造物 (桟橋、イルカ、灯台、パイプラインなど)
がれきマウンド構造の場合、各装甲ユニットの周囲および各装甲ユニット間の複雑な流れのために、個々の装甲ユニットにかかる力と安定性を決定することはできません。しかし、設計波の条件が与えられた場合に必要な装甲ユニットの質量を見積もる公式と原則があります。これらの式の係数は、水力モデルのテストに基づいています。がれきマウンド構造は頻繁に使用されるため、この国際規格に含まれていますが、ISO 2394 に従って厳密に処理されていない場合があります。
この国際規格には、港の防波堤のレイアウト、堆積物輸送を管理するための構造物のレイアウト、洗掘と浜辺の安定性、または渦による振動を除く柔軟な動的構造物の応答は含まれていません。
設計はさまざまな詳細レベルで実行されます。
- 概念;
- 実現可能性;
- きめ細かなデザイン。
この国際規格は、詳細設計を提供することを目的としています。
附属書は参考情報であり、ガイドライン/マニュアルではないことが指摘されています。附属書には規制権限はありません。
波や現在の状況は、建設現場によって異なります。特定の場所での波と現在の状態を評価することは非常に重要です。これらの条件とその不確実性に対する評価手順が含まれています。
1 Scope
This International Standard describes the principles of determining the wave and current actions on structures of the following types in the coastal zone and estuaries:
- breakwaters:
- rubble mound breakwaters;
- vertical and composite breakwaters;
- wave screens;
- floating breakwaters;
coastal dykes;
seawalls;
cylindrical structures (jetties, dolphins, lighthouses, pipelines etc.).
For the rubble mound structures it is not possible to determine the forces on and the stability of each individual armour unit because of the complex flow around and between each armour unit. But there are formulae and principles to estimate the necessary armour unit mass given the design wave conditions. Coefficients in these formulae are based on hydraulic model tests. Since the rubble mound structures are heavily used, they are included in this International Standard, although they may not be treated exactly in accordance with ISO 2394.
This International Standard does not include breakwater layout for harbours, layout of structures to manage sediment transport, scour and beach stability or the response of flexible dynamic structures, except vortex induced vibrations.
Design will be performed at different levels of detail:
- concepts;
- feasibility;
- detailed design.
This International Standard is aimed at serving the detailed design.
It is pointed out that the annexes are only informative and are not guidelines/manuals. The annexes have no regulatory power.
Wave and current conditions vary for different construction sites. It is very important to assess the wave and current conditions at a given site. Assessment procedures for these conditions and for their uncertainties are included.