この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 266:1997, 音響 - 優先周波数
- ISO 3740:2000, 音響学 — 騒音源の音響パワーレベルの決定 — 基本規格の使用に関するガイドライン
- ISO 3741:2010, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 残響試験室の精密な方法
- ISO 3743-1, 音響学 — 音圧を使用した騒音源の音響パワーレベルおよび音響エネルギーレベルの決定 — 残響音場における小型可動音源の工学的手法 — Part 1: 堅壁の試験室の比較手法
- ISO 3743-2, 音響学 — 音圧を使用した騒音源の音響パワーレベルの決定 — 残響フィールドにおける小型の移動可能な発生源に対する工学的手法 — Part 2: 特殊な残響試験室の手法
- ISO 3747, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 残響環境における現場で使用するためのエンジニアリング/調査方法
- ISO 5801:2007, 産業用ファン — 標準化された気道を使用した性能テスト
- ISO 6926:1999, 音響学 - 音響パワーレベルの決定に使用される基準音源の性能と校正に関する要件
- ISO 13347-1:2004, 産業用ファン — 標準化された実験室条件下でのファン音響パワー レベルの決定 — Part 1: 概要
- ISO 13347-2:2004, 工業用ファン — 標準化された実験室条件下でのファン音響パワーレベルの決定 — Part 2: 残響室法
- ISO 13349:2010, ファン — 語彙とカテゴリーの定義
- ISO 27327-1:2009, ファン — エア カーテン ユニット — Part 1: 空力性能評価の実験室試験方法
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 266:1997, Acoustics — Preferred frequencies
- ISO 3740:2000, Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards
- ISO 3741:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
- ISO 3743-1, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room
- ISO 3743-2, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
- ISO 3747, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
- ISO 5801:2007, Industrial fans — Performance testing using standardized airways
- ISO 6926:1999, Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- ISO 13347-1:2004, Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview
- ISO 13347-2:2004, Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method
- ISO 13349:2010, Fans — Vocabulary and definitions of categories
- ISO 27327-1:2009, Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating