この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、関連する ISO 刊行物に示されているサイズ範囲内の転がり軸受の基本動定格荷重を計算する方法を指定します。転がり軸受は、適正製造基準に従い、基本的に従来の設計に従って、現在一般的に使用されている高品質の硬化軸受鋼から製造されています。転がり接触面の形状について。
このドキュメントでは、基本的な定格寿命を計算する方法も指定します。これは、一般的に使用される高品質の材料、良好な製造品質、および従来の動作条件で、90% の信頼性に関連する寿命です。さらに、さまざまな信頼性、潤滑条件、汚染された潤滑油、および軸受の疲労荷重が考慮された修正定格寿命の計算方法が規定されています。
この国際規格は、ベアリングの寿命に対する摩耗、腐食、電食の影響をカバーしていません。
このドキュメントは、転動体がシャフトまたはハウジングの表面で直接動作する設計には適用されません。
複列ラジアル軸受と複式スラスト軸受は、この文書で言及する場合、対称であると推定されます。
特定のタイプのベアリングに関するさらなる制限は、関連条項に含まれています。
1 Scope
This International Standard specifies methods of calculating the basic dynamic load rating of rolling bearings within the size ranges shown in the relevant ISO publications, manufactured from contemporary, commonly used, high quality hardened bearing steel, in accordance with good manufacturing practice and basically of conventional design as regards the shape of rolling contact surfaces.
This document also specifies methods of calculating the basic rating life, which is the life associated with 90 % reliability, with commonly used high quality material, good manufacturing quality and with conventional operating conditions. In addition, it specifies methods of calculating the modified rating life, in which various reliabilities, lubrication condition, contaminated lubricant and fatigue load of the bearing are taken into account.
This International Standard does not cover the influence of wear, corrosion and electrical erosion on bearing life.
This document is not applicable to designs where the rolling elements operate directly on a shaft or housing surface, unless that surface is equivalent in all respects to the bearing ring (or washer) raceway it replaces.
Double-row radial bearings and double-direction thrust bearings are, when referred to in this document, presumed to be symmetrical.
Further limitations concerning particular types of bearings are included in the relevant clauses.