この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語、定義、略語および記号
3.1 用語、定義、略語
「受け入れる」、「受け入れられる」、「受け入れられる」などの言葉は、この国際規格に含まれるサンプリング計画の使用のみを指しており、製品を受け入れることに同意することを意味するものではありません。顧客による受諾の判断は、契約文書に記載されているとおりとします。
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1.1
消費者のリスク
cr
<受け入れサンプリング> プロセスの 品質レベル (3.1.5) が受け入れサンプリング計画で不満足であると示された値を持つ場合の合格の確率
[出典:ISO 3534‑2:2006; 4.6.2]
3.1.2
消費者のリスクの質
CRQ
<受け入れサンプリング> 受け入れサンプリング計画において、特定の消費者の リスク (3.1.1) に対応するロットまたはプロセスの 品質レベル (3.1.5)
[出典:ISO 3534‑2:2006; 4.6.9]
3.1.3
生産者のリスク
PR
<合格サンプリング> プロセスの 品質レベル (3.1.5) が計画で合格と定められた値である場合に不合格となる確率
[出典:ISO 3534‑2:2006; 4.6.4]
3.1.4
生産者のリスクの質
PRQ
<受け入れサンプリング> 受け入れサンプリング計画において、指定された 生産者のリスク (3.1.3) に対応するロットまたはプロセスの 品質レベル (3.1.5)
[出典:ISO 3534‑2:2006; 4.6.10]
3.1.5
品質レベル
<合格サンプリング> 不適合ユニットの割合または 不適合数の割合として表される品質 (3.1.9)
[出典:ISO 3534‑2:2006; 4.6.16]
注記 1:割合 (または分数) は、単位 1 またはパーセントで表すことができます。不適合ユニットの割合は、不適合ユニットの数値またはパーセンテージとして読み取ることができます。不良発生率は、1台当たりまたは100台当たりの不適合件数として読み取れます。
3.1.6
平均サンプルサイズ
アッシ
<受け入れサンプリング> 特定の受け入れサンプリング計画を使用した場合に、受け入れまたは不受け入れを決定する際にロットごとに検査されたサンプルの平均ユニット数
注記 1: ASSI は、提出されたロットの実際の 品質レベル (3.1.5) に依存します。
[出典:ISO 3534‑2:2006; 4.7.3]
3.1.7
平均的な送信品質
AOQ
<受け入れサンプリング> 所定の入荷製品品質値に対する出荷製品の期待平均 品質レベル (3.1.5)
[出典:ISO 3534‑2:2006; 4.7.1]
3.1.8
平均送信品質制限
AOQL
<受け入れサンプリング> 指定された受け入れサンプリング計画に対する入荷製品の 品質レベル (3.1.5) のすべての可能な値にわたる最大 AOQ (3.1.7) 、および別段の指定がない限り、すべての不受け入れロットの修正
[出典:ISO 3534‑2:2006; 4.7.2]
3.1.9
不適合
要件の不履行
[出典:ISO 9000:2015; 3.6.9; ISO 3534‑2:2006; 3.1.11]
注記 1: 欠陥の注記 (3.1.11) を参照してください。
3.1.10
不適合品
1 つ以上の 不適合がある品目 (3.1.9)
[出典:ISO 3534‑2:2006; 1.2.12]
3.1.11
欠陥
意図された使用または指定された使用に関連する要件の不履行
[出典:ISO 3534‑2:2006; 3.1.12]
注記 1:欠陥と 不適合の概念 (3.1.9) の区別は、法的な意味合い、特に製造物責任の問題に関連する意味合いを持っているため重要です。したがって、「欠陥」という用語は細心の注意を払って使用する必要があります。
注記 2: 顧客による使用目的は、顧客が提供する操作指示や保守指示などの情報の性質によって影響を受ける可能性があります。
3.2 記号
| α | 生産者のリスク |
| β | 消費者のリスク |
| m | ダブルサンプリング計画の 2 番目のサンプルのサイズ |
| n | ダブルサンプリング計画の最初のサンプルのサイズ |
参考文献
| 1 | ISO 2859-1:1999, 属性による検査のためのサンプリング手順 — Part 1: ロットごとの検査のための合格品質限界 (AQL) によってインデックス付けされたサンプリング スキーム |
| 2 | ISO 3534-2:2006, 統計 — 語彙と記号 — Part 2: 応用統計 |
| 3 | ISO 9000:2015, 品質マネジメントシステム - 基礎と用語 |
3 Terms, definitions, abbreviations and symbols
3.1 Terms, definitions and abbreviations
The words “accept”, “accepted”, “acceptable”, etc., refer only to the use of the sampling plans contained in this International Standard and do not imply an agreement to accept any product. Determination of acceptability by the customer shall be as described in contractual documents.
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1.1
consumer's risk
cr
<acceptance sampling> probability of acceptance when the quality level (3.1.5) of the process has a value stated by the acceptance sampling plan as unsatisfactory
[SOURCE:ISO 3534‑2:2006; 4.6.2]
3.1.2
consumer's risk quality
CRQ
<acceptance sampling> quality level (3.1.5) of a lot or process which, in the acceptance sampling plan, corresponds to a specified consumer's risk (3.1.1)
[SOURCE:ISO 3534‑2:2006; 4.6.9]
3.1.3
producer's risk
PR
<acceptance sampling> probability of non-acceptance when the quality level (3.1.5) of the process has a value stated by the plan as acceptable
[SOURCE:ISO 3534‑2:2006; 4.6.4]
3.1.4
producer's risk quality
PRQ
<acceptance sampling> quality level (3.1.5) of a lot or process which, in the acceptance sampling plan, corresponds to a specified producer's risk (3.1.3)
[SOURCE:ISO 3534‑2:2006; 4.6.10]
3.1.5
quality level
<acceptance sampling> quality expressed as a rate of nonconforming units or rate of number of nonconformities (3.1.9)
[SOURCE:ISO 3534‑2:2006; 4.6.16]
Note 1 to entry: Rate (or fraction) can be expressed in the unit 1 or in percentage. Rate of nonconforming units can be read as a numerical value or a percentage of nonconforming units. Rate of number of nonconformities can be read as a number of nonconformities per unit or per 100 units.
3.1.6
average sample size
ASSI
<acceptance sampling> average number of units in sample inspected per lot in reaching decisions to accept or not to accept when using a given acceptance sampling plan
Note 1 to entry: ASSI is dependent on the actual quality level (3.1.5) of the submitted lots.
[SOURCE:ISO 3534‑2:2006; 4.7.3]
3.1.7
average outgoing quality
AOQ
<acceptance sampling> expected average quality level (3.1.5) of outgoing product for a given value of incoming product quality
[SOURCE:ISO 3534‑2:2006; 4.7.1]
3.1.8
average outgoing quality limit
AOQL
<acceptance sampling> maximum AOQ (3.1.7) over all possible values of incoming product quality level (3.1.5) for a given acceptance sampling plan and rectification of all non-accepted lots unless specified otherwise
[SOURCE:ISO 3534‑2:2006; 4.7.2]
3.1.9
nonconformity
non-fulfilment of a requirement
[SOURCE:ISO 9000:2015; 3.6.9; ISO 3534‑2:2006; 3.1.11]
Note 1 to entry: See notes to defect (3.1.11) .
3.1.10
nonconforming item
item with one or more nonconformities (3.1.9)
[SOURCE:ISO 3534‑2:2006; 1.2.12]
3.1.11
defect
non-fulfilment of a requirement related to an intended or specified use
[SOURCE:ISO 3534‑2:2006; 3.1.12]
Note 1 to entry: The distinction between the concepts defect and nonconformity (3.1.9) is important as it has legal connotations, particularly those associated with product liability issues. Consequently, the term “defect” should be used with extreme caution.
Note 2 to entry: The intended use by the customer can be affected by the nature of the information, such as operating or maintenance instructions, provided by the customer.
3.2 Symbols
| α | producer's risk |
| β | consumer's risk |
| m | size of the second sample in a double sampling plan |
| n | size of the first sample in a double sampling plan |
Bibliography
| 1 | ISO 2859-1:1999, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| 2 | ISO 3534-2:2006, Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| 3 | ISO 9000:2015, Quality management systems — Fundamentals and vocabulary |