この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 48, ゴム、加硫または熱可塑性 — 硬度の測定 (10 IRHD と 100 IRHD の間の硬度)
- ISO 649-1, 実験用ガラス器具 — 汎用密度比重計 — 1: 仕様
- ISO 718, 実験用ガラス器具 - 熱衝撃および熱衝撃耐久性 - 試験方法
- ISO 3585, ホウケイ酸ガラス 3.3 — 特性
- ISO 3696, 分析ラボ用水 — 仕様および試験方法
- ISO 4788, 実験用ガラス器具 — メスシリンダー
- ISO 4799, 実験用ガラス器具 - コンデンサー
- ISO 28764, ガラス質および磁器エナメル — 鋼板、アルミニウムおよび鋳鉄のエナメルを試験するための試験片の製造
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 649-1, Laboratory glassware — Density hydrometers for general purposes — 1: Specification
- ISO 718, Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
- ISO 3585, Borosilicate glass 3.3 — Properties
- ISO 3696, Water for analytical laboratory use — Specification and test methods
- ISO 4788, Laboratory glassware — Graduated measuring cylinders
- ISO 4799, Laboratory glassware — Condensers
- ISO 28764, Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron